Pinebook Pro display.
Jesper Schmitz Mouridsen
jsm at FreeBSD.org
Tue Feb 9 17:29:01 UTC 2021
On 09.02.2021 08.47, KIRIYAMA Kazuhiko wrote:
> On Tue, 09 Feb 2021 16:26:52 +0900,
> Jesper Schmitz Mouridsen wrote:
>>
>> On 08.02.2021 23.57, KIRIYAMA Kazuhiko wrote:
>>> On Mon, 08 Feb 2021 17:20:38 +0900,
>>> Jesper Schmitz Mouridsen wrote:
>>>> On 08.02.2021 07.52, KIRIYAMA Kazuhiko wrote:
>>>>> On Thu, 04 Feb 2021 22:24:05 +0900,
>>>>> Jesper Schmitz Mouridsen wrote:
>>>>>> On 04.02.2021 07.06, KIRIYAMA Kazuhiko wrote:
>>>>>>> Hi, Jesper
>>>>>>>
>>>>>>> On Mon, 01 Feb 2021 00:49:24 +0900,
>>>>>>> Jesper Schmitz Mouridsen wrote:
>>>>>>>> Hi
>>>>>>>>
>>>>>>>> Just for information, I did some trial and error on u-boot for the
>>>>>>>>
>>>>>>>> Pinebook Pro in order to have display working without hacking
>>>>>>>>
>>>>>>>> the kernel. See https://github.com/jsm222/ports and
>>>>>>> I've modified for u-boot-2020.10 [1] and remade
>>>>>>> idbloader.img and u-boot.itb then install those and reboot.
>>>>>>> But could not display console ;-(
>>>>>> I sent you a PM with a patch.
>>>>>>
>>>>>> Also we did some duplicate work, see
>>>>>>
>>>>>> https://github.com/jsm222/u-boot-pinebookpro
>>>>> I've tested above, it display until FreeBSD kernel boot but
>>>>> blackout after. Namely display console
>>>>> from `U-Boot 2020.10 (Feb 08 2021 -10:55:28 +0900)'
>>>>> to `masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000'
>>>>> and blackout after '---<<BOOT>>---' in the below log :
>>>>>
>>>>> root at kazu:/home/kiri/bootimg # cu -s 1500000 -l /dev/cuaU0
>>>>> Connected
>>>>>
>>>>> U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28)
>>>>> Channel 0: LPDDR4, 50MHz
>>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
>>>>> Channel 1: LPDDR4, 50MHz
>>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
>>>>> 256B stride
>>>>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
>>>>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
>>>>> Trying to boot from BOOTROM
>>>>> Returning to boot ROM...
>>>> Hi, you also need to copy the u-boot dtb files to the efi partition
>>>>
>>>> from /usr/ports/sysutils/u-boot-pinebookpro/work/u-boot-2020.10.
>>>>
>>>> sudo find . -name "*.dtb" -exec cp -iv {} /mnt/dtb/rockchip/ \;
>>> I'd copied *.dtb to /mnt/dtb/rockchip as follows :
>>>
>>> root at kazu:~ # gpart show mmcsd0
>>> => 40 244277168 mmcsd0 GPT (116G)
>>> 40 32728 - free - (16M)
>>> 32768 102400 1 efi (50M)
>>> 135168 16777216 2 freebsd-swap (8.0G)
>>> 16912384 227364736 3 freebsd-ufs (108G)
>>> 244277120 88 - free - (44K)
>>>
>>> root at kazu:~ # mount_msdosfs /dev/mmcsd0p1 /mnt
>>> root at kazu:~ # ll /mnt/dtb/rockchip/
>>> total 1624
>>> -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 dt-spl.dtb*
>>> -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 dt.dtb*
>>> -rwxr-xr-x 1 root wheel 58854 Feb 8 20:02 rk3399-evb.dtb*
>>> -rwxr-xr-x 1 root wheel 62750 Feb 8 20:02 rk3399-ficus.dtb*
>>> -rwxr-xr-x 1 root wheel 63968 Feb 8 20:02 rk3399-firefly.dtb*
>>> -rwxr-xr-x 1 root wheel 66411 Feb 8 20:02 rk3399-gru-bob.dtb*
>>> -rwxr-xr-x 1 root wheel 63354 Feb 8 20:02 rk3399-khadas-edge-captain.dtb*
>>> -rwxr-xr-x 1 root wheel 63346 Feb 8 20:02 rk3399-khadas-edge-v.dtb*
>>> -rwxr-xr-x 1 root wheel 63291 Feb 8 20:02 rk3399-khadas-edge.dtb*
>>> -rwxr-xr-x 1 root wheel 61094 Feb 8 20:02 rk3399-leez-p710.dtb*
>>> -rwxr-xr-x 1 root wheel 63784 Feb 8 20:02 rk3399-nanopc-t4.dtb*
>>> -rwxr-xr-x 1 root wheel 62897 Feb 8 20:02 rk3399-nanopi-m4-2gb.dtb*
>>> -rwxr-xr-x 1 root wheel 62897 Feb 8 20:02 rk3399-nanopi-m4.dtb*
>>> -rwxr-xr-x 1 root wheel 62753 Feb 8 20:02 rk3399-nanopi-neo4.dtb*
>>> -rwxr-xr-x 1 root wheel 64009 Feb 8 20:02 rk3399-orangepi.dtb*
>>> -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 rk3399-pinebook-pro.dtb*
>>> -rwxr-xr-x 1 root wheel 56223 Feb 8 20:02 rk3399-puma-haikou.dtb*
>>> -rwxr-xr-x 1 root wheel 65035 Feb 8 20:02 rk3399-roc-pc-mezzanine.dtb*
>>> -rwxr-xr-x 1 root wheel 63850 Feb 8 20:02 rk3399-roc-pc.dtb*
>>> -rwxr-xr-x 1 root wheel 55473 Feb 8 20:02 rk3399-rock-pi-4a.dtb*
>>> -rwxr-xr-x 1 root wheel 62227 Feb 8 20:02 rk3399-rock-pi-4b.dtb*
>>> -rwxr-xr-x 1 root wheel 62227 Feb 8 20:02 rk3399-rock-pi-4c.dtb*
>>> -rwxr-xr-x 1 root wheel 62376 Feb 8 20:02 rk3399-rock960.dtb*
>>> -rwxr-xr-x 1 root wheel 63651 Feb 8 20:02 rk3399-rockpro64.dtb*
>>> -rwxr-xr-x 1 root wheel 59921 Feb 8 20:02 rk3399pro-rock-pi-n10.dtb*
>>> -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 u-boot-spl.dtb*
>>> -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 u-boot-tpl.dtb*
>>> -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 u-boot.dtb*
>>> root at kazu:~ #
>>>
>>> But does not display console as well ;-) Boot log is as
>>> follows :
>> Hi,
>>
>> What is your output of
>>
>> sysctl hw.clock.aclk_vop1
>>
>> my output is:
>>
>> hw.clock.aclk_vop1.enable_cnt: 0
>> hw.clock.aclk_vop1.childrens:
>> hw.clock.aclk_vop1.parents: aclk_vop1_pre
>> hw.clock.aclk_vop1.parent: aclk_vop1_pre
>> hw.clock.aclk_vop1.frequency: 594000000
>> and sysctl hw.clock.cpll
>>
>> my output is:
>>
>> hw.clock.cpll.enable_cnt: 16
>> hw.clock.cpll.childrens: pclk_ddr_c aclk_vcodec_pre_c aclk_vdu_pre_c
>> aclk_iep_pre_c aclk_rga_pre_c clk_rga_core_c clk_crypto0_c clk_crypto1_c
>> clk_i2s0_div_c clk_i2s1_div_c clk_i2s2_div_c clk_spdif_rec_dptx_c
>> clk_spdif_div_c clk_uart_src clk_uart0_src clk_testout2_pll_src
>> clk_testout1_pll_src aclk_hdcp_c aclk_vio_c pclk_edp_c aclk_isp0_c
>> aclk_isp1_c aclk_gic_pre_c clk_cifout_src_c clk_spi5_c clk_test_pre
>> clk_spi0_c clk_spi4_c clk_spi2_c clk_i2c5_c clk_i2c1_c clk_i2c6_c
>> clk_i2c2_c clk_i2c7_c clk_i2c3_c cpll_cs cpll_cci_trace
>> cpll_aclk_cci_src cpll_aclk_perihp_src cpll_aclk_emmc_src
>> cpll_aclk_gmac_src cpll_fclk_cm0s_src cpll_aclk_perilp0_src
>> cpll_hclk_perilp1_src clk_uphy0_tcpdcore_c clk_uphy1_tcpdcore_c clk_sdmmc_c
>> hw.clock.cpll.parents: xin24m xin32k
>> hw.clock.cpll.parent: xin24m
>> hw.clock.cpll.frequency: 800000000
> My outputs are :
>
> root at kazu:~ # sysctl hw.clock.aclk_vop1
> hw.clock.aclk_vop1.enable_cnt: 0
> hw.clock.aclk_vop1.childrens:
> hw.clock.aclk_vop1.parents: aclk_vop1_pre
> hw.clock.aclk_vop1.parent: aclk_vop1_pre
> hw.clock.aclk_vop1.frequency: 594000000
> root at kazu:~ # sysctl hw.clock.cpll
> hw.clock.cpll.enable_cnt: 14
> hw.clock.cpll.childrens: pclk_ddr_c aclk_vcodec_pre_c aclk_vdu_pre_c aclk_iep_pre_c aclk_rga_pre_c clk_rga_core_c hclk_sd_c clk_crypto0_c clk_crypto1_c clk_i2s0_div_c clk_i2s1_div_c clk_i2s2_div_c clk_spdif_rec_dptx_c clk_spdif_div_c clk_uart_src clk_uart0_src clk_testout2_pll_src clk_testout1_pll_src aclk_hdcp_c aclk_vio_c pclk_edp_c aclk_isp0_c aclk_isp1_c aclk_gic_pre_c clk_cifout_src_c clk_spi5_c clk_test_pre clk_spi0_c clk_spi4_c clk_spi2_c clk_i2c5_c clk_i2c1_c clk_i2c6_c clk_i2c2_c clk_i2c7_c clk_i2c3_c cpll_cs cpll_cci_trace cpll_aclk_cci_src cpll_aclk_perihp_src cpll_aclk_emmc_src cpll_aclk_gmac_src cpll_fclk_cm0s_src cpll_aclk_perilp0_src cpll_hclk_perilp1_src clk_uphy0_tcpdcore_c clk_uphy1_tcpdcore_c
> hw.clock.cpll.parents: xin24m xin32k
> hw.clock.cpll.parent: xin24m
> hw.clock.cpll.frequency: 800000000
> root at kazu:~ #
>
> Regards
>
> ---
> Kazuhiko Kiriyama <kiri at truefc.org>
>
Hi,
Can you try [1] on a sd card with uart disabled and emmc blocked? It
works for me.
I have not tested it with uart enabled..
[1]
http://build.schmitz.computer/build/FreeBSD-13.0-ALPHA2-arm64-aarch64-ROCKPRO64-pbp-mod2-20210122-02611ef8ee9-256201.img.xz
/Jesper.
>> /Jesper
>>
>>
>>> root at kazu:/home/kiri/bootimg # cu -s 1500000 -l /dev/cuaU0
>>> Connected
>>>
>>> U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28)
>>> Channel 0: LPDDR4, 50MHz
>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
>>> Channel 1: LPDDR4, 50MHz
>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
>>> 256B stride
>>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
>>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
>>> Trying to boot from BOOTROM
>>> Returning to boot ROM...
>>>
>>> U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900)
>>> Trying to boot from MMC2
>>>
>>>
>>> U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900)
>>> Consoles: EFI console
>>> Reading loader env vars from /efi/freebsd/loader.env
>>> Setting currdev to disk0p1:
>>> FreeBSD/arm64 EFI loader, Revision 1.1
>>> (Fri Jan 8 12:04:36 JST 2021 admin at lmainkx)
>>>
>>> Command line arguments: loader.efi
>>> Image base: 0xf3df0000
>>> EFI version: 2.80
>>> EFI Firmware: Das U-Boot (rev 8224.4096)
>>> Console: comconsole (0)
>>> Load Path: /efi\boot\bootaa64.efi
>>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
>>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
>>> Setting currdev to disk0p1:
>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x21000,0x1000000)
>>> Setting currdev to disk0p2:
>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x1021000,0xd8d4f80)
>>> Setting currdev to disk0p3:
>>> Loading /boot/defaults/loader.conf
>>> Loading /boot/defaults/loader.conf
>>> Loading /boot/device.hints
>>> Loading /boot/loader.conf
>>> Loading /boot/loader.conf.local
>>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_| !
> |_| !
>>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop
>>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop
>>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop
>>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop
>>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop
>>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop
>>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop
>>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop
>>> [25;0HLoading kernel...
>>> /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e]
>>> Loading configured modules...
>>> /etc/hostid size=0x25
>>> /boot/entropy size=0x1000
>>> Using DTB provided by EFI at 0x80ec000.
>>> EFI framebuffer information:
>>> addr, size 0xf7800000, 0x3f4800
>>> dimensions 1920 x 1080
>>> stride 1920
>>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000
>>> ---<<BOOT>>---
>>> KDB: debugger backends: ddb
>>> KDB: current backend: ddb
>>> Copyright (c) 1992-2020 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>> The Regents of the University of California. All rights reserved.
>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021
>>> admin at lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
>>> FreeBSD clang version 11.0.0 (git at github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673)
>>> WARNING: WITNESS option enabled, expect reduced performance.
>>> VT(efifb): resolution 1920x1080
>>> module firmware already present!
>>> real memory = 4158373888 (3965 MB)
>>> avail memory = 4025094144 (3838 MB)
>>> Starting CPU 1 (1)
>>> Starting CPU 2 (2)
>>> Starting CPU 3 (3)
>>> Starting CPU 4 (100)
>>> Starting CPU 5 (101)
>>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
>>> random: unblocking device.
>>> random: entropy device external interface
>>> MAP f3f16000 mode 2 pages 4
>>> MAP f3f1b000 mode 2 pages 4
>>> MAP f6f40000 mode 2 pages 16
>>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
>>> kbd0 at kbdmux0
>>> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
>>> ofwbus0: <Open Firmware Device Tree>
>>> clk_fixed0: <Fixed clock> on ofwbus0
>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
>>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0
>>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0
>>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0
>>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0
>>> regfix0: <Fixed Regulator> on ofwbus0
>>> regfix1: <Fixed Regulator> on ofwbus0
>>> regfix2: <Fixed Regulator> on ofwbus0
>>> regfix3: <Fixed Regulator> on ofwbus0
>>> regfix4: <Fixed Regulator> on ofwbus0
>>> regfix5: <Fixed Regulator> on ofwbus0
>>> regfix6: <Fixed Regulator> on ofwbus0
>>> regfix7: <Fixed Regulator> on ofwbus0
>>> regfix8: <Fixed Regulator> on ofwbus0
>>> regfix9: <Fixed Regulator> on ofwbus0
>>> regfix10: <Fixed Regulator> on ofwbus0
>>> regfix11: <Fixed Regulator> on ofwbus0
>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0
>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0
>>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0
>>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0
>>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
>>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0
>>> gpiobus0: <OFW GPIO bus> on gpio0
>>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0
>>> gpiobus1: <OFW GPIO bus> on gpio1
>>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0
>>> gpiobus2: <OFW GPIO bus> on gpio2
>>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0
>>> gpiobus3: <OFW GPIO bus> on gpio3
>>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0
>>> gpiobus4: <OFW GPIO bus> on gpio4
>>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0
>>> iicbus0: <OFW I2C bus> on rk_i2c0
>>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0
>>> iicbus1: <OFW I2C bus> on rk_i2c1
>>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0
>>> iicbus2: <OFW I2C bus> on rk_i2c2
>>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
>>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0
>>> iicbus3: <OFW I2C bus> on rk_i2c3
>>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2
>>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
>>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
>>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
>>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0
>>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>> rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0
>>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0
>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
>>> cpu0: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt0: <Generic cpufreq driver> on cpu0
>>> cpu1: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt1: <Generic cpufreq driver> on cpu1
>>> cpu2: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt2: <Generic cpufreq driver> on cpu2
>>> cpu3: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt3: <Generic cpufreq driver> on cpu3
>>> cpu4: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt4: <Generic cpufreq driver> on cpu4
>>> cpu5: <Open Firmware CPU> on cpulist0
>>> cpufreq_dt5: <Generic cpufreq driver> on cpu5
>>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0
>>> pcib0: Gen1 link training timeouted: 0x00080001.
>>> pci0: <PCI bus> on pcib0
>>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0
>>> pcib0: failed to reserve resource for pcib1
>>> pcib1: failed to allocate initial memory window: 0-0xfffff
>>> pci1: <PCI bus> on pcib1
>>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0
>>> rockchip_dwmmc0: Hardware version ID is 270a
>>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0
>>> rockchip_dwmmc1: Hardware version ID is 270a
>>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0
>>> rk_emmcphy0: got emmcclk clock
>>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk.
>>> sdhci_fdt0: 1 slot(s) allocated
>>> mmc0: <MMC/SD bus> on sdhci_fdt0
>>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0
>>> usbus0: EHCI version 1.0
>>> usbus0 on ehci0
>>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0
>>> usbus1 on ohci0
>>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0
>>> usbus2: EHCI version 1.0
>>> usbus2 on ehci1
>>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0
>>> usbus3 on ohci1
>>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
>>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30
>>> xhci0: 64 bytes context size, 32-bit DMA
>>> usbus4: trying to attach
>>> usbus4 on xhci0
>>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0
>>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31
>>> xhci1: 64 bytes context size, 32-bit DMA
>>> usbus5: trying to attach
>>> usbus5 on xhci1
>>> iicbus0: <unknown card> at addr 0x22
>>> iic0: <I2C generic I/O> on iicbus0
>>> iic1: <I2C generic I/O> on iicbus1
>>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0
>>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0
>>> uart1: console (1500000,n,8,1)
>>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0
>>> spibus0: <OFW SPI bus> on spi0
>>> spibus0: <unknown card> at cs 0 mode 0
>>> iicbus2: <unknown card> at addr 0x82
>>> iic2: <I2C generic I/O> on iicbus2
>>> iicbus3: <unknown card> at addr 0x44
>>> iic3: <I2C generic I/O> on iicbus3
>>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0
>>> pwmbus0: <OFW PWM bus> on pwm0
>>> pwmc0: <PWM Control> channel 0 on pwmbus0
>>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0
>>> pwmbus1: <OFW PWM bus> on pwm1
>>> pwmc1: <PWM Control> channel 0 on pwmbus1
>>> gpioc0: <GPIO controller> on gpio0
>>> gpioc1: <GPIO controller> on gpio1
>>> gpioc2: <GPIO controller> on gpio2
>>> gpioc3: <GPIO controller> on gpio3
>>> gpioc4: <GPIO controller> on gpio4
>>> gpioled0: <GPIO LEDs> on ofwbus0
>>> cryptosoft0: <software crypto>
>>> Timecounters tick every 1.000 msec
>>> usbus0: 480Mbps High Speed USB v2.0
>>> usbus1: 12Mbps Full Speed USB v1.0
>>> usbus2: 480Mbps High Speed USB v2.0
>>> usbus3: 12Mbps Full Speed USB v1.0
>>> usbus4: 5.0Gbps Super Speed USB v3.0
>>> usbus5: 5.0Gbps Super Speed USB v3.0
>>> ugen3.1: <Generic OHCI root HUB> at usbus3
>>> uhub0 on usbus3
>>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>>> ugen2.1: <Generic EHCI root HUB> at usbus2
>>> uhub1 on usbus2
>>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
>>> ugen1.1: <Generic OHCI root HUB> at usbus1
>>> uhub2 on usbus1
>>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>>> ugen0.1: <Generic EHCI root HUB> at usbus0
>>> uhub3 on usbus0
>>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
>>> ugen5.1: <Synopsys XHCI root HUB> at usbus5
>>> uhub4 on usbus5
>>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5
>>> ugen4.1: <Synopsys XHCI root HUB> at usbus4
>>> uhub5 on usbus4
>>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4
>>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block
>>> mmcsd0boot0: 4MB partition 1 at mmcsd0
>>> mmcsd0boot1: 4MB partition 2 at mmcsd0
>>> mmcsd0rpmb: 17MB partition 3 at mmcsd0
>>> Release APs...done
>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0
>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
>>> Instruction Set Attributes 1 = <>
>>> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
>>> Processor Features 1 = <>
>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>> Memory Model Features 1 = <8bit VMID>
>>> Memory Model Features 2 = <32bit CCIDX,48bit VA>
>>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]...
>>> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
>>> Debug Features 1 = <>
>>> Auxiliary Features 0 = <>
>>> Auxiliary Features 1 = <>
>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1
>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2
>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3
>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0
>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
>>> CPU 5: ARM Cortex- Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
>>> WARNING: WITNESS option enabled, expect reduced performance.
>>> Unresolved linked clock found: clkin_gmac
>>> uhub0: 1 port with 1 removable, self powered
>>> uhub2: 1 port with 1 removable, self powered
>>> uhub5: 2 ports with 2 removable, self powered
>>> Warning: no time-of-day clock registered, uhub4: 2 ports with 2 removable, self powered
>>> system time will not be set accurately
>>> uhub1: 1 port with 1 removable, self powered
>>> uhub3: 1 port with 1 removable, self powered
>>> Setting hostuuid: 31323634-3737-6236-6162-336630376339.
>>> Setting hostid: 0x5d4b60f9.
>>> Starting file system checks:
>>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS
>>> /dev/mmcsd0p3: clean, 27264084 free (348 frags, 3407967 blocks, 0.0% fragmentation)
>>> lock order reversal:
>>> 1st 0xffffa00062d92810 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724
>>> 2nd 0xffffa00062c99dc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918
>>> lock order devfs -> ufs established at:
>>> #0 0xffff000000569234 at witness_checkorder+0x448
>>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8
>>> #2 0xffff00000075ad38 at ffs_lock+0x64
>>> #3 0xffff0000005ed57c at _vn_lock+0x54
>>> #4 0xffff0000005ce630 at vfs_domount+0xdf8
>>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4
>>> #6 0xffff0000005d0e78 at kernel_mount+0x4c
>>> #7 0xffff0000005d3564 at parse_mount+0x49c
>>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc
>>> #9 0xffff00000048dc68 at start_init+0x24
>>> #10 0xffff0000004b7474 at fork_exit+0x7c
>>> lock order ufs -> devfs attempted at:
>>> #0 0xffff000000569a40 at witness_checkorder+0xc54
>>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50
>>> #2 0xffff0000005ed57c at _vn_lock+0x54
>>> #3 0xffff0000005d77d8 at vget_finish+0x4c
>>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0
>>> #5 0xffff0000003b12c0 at devfs_root+0x44
>>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154
>>> #7 0xffff0000005d89b0 at vflush+0x5c
>>> #8 0xffff0000003b11c8 at devfs_unmount+0x34
>>> #9 0xffff0000005cf4c4 at dounmount+0x43c
>>> #10 0xffff0000005cf040 at kern_unmount+0x2d8
>>> #11 0xffff000000812d0c at do_el0_sync+0x454
>>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90
>>> Mounting local filesystems:.
>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat
>>> Setting hostname: kazu.tfc.
>>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1
>>> ukbd0 on uhub2
>>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1
>>> kbd1 at ukbd0
>>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
>>> Feeding entropy: .
>>> lo0: link state changed to UP
>>> Starting Network: lo0.
>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
>>> inet6 ::1 prefixlen 128
>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
>>> inet 127.0.0.1 netmask 0xff000000
>>> groups: lo
>>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>>> Starting devd.
>>> Autoloading module: mx25l.ko
>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
>>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K
>>> Autoloading module: pwm_backlight.ko
>>> link_elf: symbol backlight_get_info_desc undefined
>>> kldload: can't load pwm_backlight.ko: No such file or directory
>>> Autoloading module: uhid.ko
>>> Autoloading module: wmt.ko
>>> add host 127.0.0.1: gateway lo0 fib 0: route already in table
>>> route: writing to routing socket: Network is unreachable
>>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable
>>> add host ::1: gateway lo0 fib 0: route already in table
>>> add net fe80::: gateway ::1
>>> add net ff02::: gateway ::1
>>> add net ::ffff:0.0.0.0: gateway ::1
>>> add net ::0.0.0.0: gateway ::1
>>> Updating /var/run/os-release done.
>>> Creating and/or trimming log files.
>>> Updating motd:.
>>> Clearing /tmp (X related).
>>> Starting syslogd.
>>> No core dumps found.
>>> Mounting late filesystems:.
>>> Security policy loaded: MAC/ntpd (mac_ntpd)
>>> Starting ntpd.
>>> Feb 9 07:23:09 kazu ntpd[1000]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 43 days ago
>>> Performing sanity check on sshd configuration.
>>> Starting sshd.
>>> Starting cron.
>>> Starting sendmail.
>>> Starting sendmail_msp_queue.
>>> Feb 9 07:23:10 kazu ntpd[1000]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8)
>>> Configuring vt: blanktime screensaverkldload: can't load logo_saver: No such file or directory
>>> /etc/rc: WARNING: Unable to load kernel module logo_saver
>>> .
>>> Starting background file system checks in 60 seconds.
>>>
>>> Tue Feb 9 07:23:11 JST 2021
>>>
>>> FreeBSD/arm64 (kazu.tfc) (ttyu1)
>>>
>>> login:
>>>
>>>> after make. Otherwise the ACLK_VOP1 goes to 800000000, and
>>>>
>>>> we lose display.
>>>>
>>>> /Jesper
>>>>
>>>>> U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900)
>>>>> Trying to boot from MMC2
>>>>>
>>>>>
>>>>> U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900)
>>>>> Consoles: EFI console
>>>>> Reading loader env vars from /efi/freebsd/loader.env
>>>>> Setting currdev to disk0p1:
>>>>> FreeBSD/arm64 EFI loader, Revision 1.1
>>>>> (Fri Jan 8 12:04:36 JST 2021 admin at lmainkx)
>>>>>
>>>>> Command line arguments: loader.efi
>>>>> Image base: 0xf3df0000
>>>>> EFI version: 2.80
>>>>> EFI Firmware: Das U-Boot (rev 8224.4096)
>>>>> Console: comconsole (0)
>>>>> Load Path: /efi\boot\bootaa64.efi
>>>>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
>>>>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
>>>>> Setting currdev to disk0p1:
>>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x21000,0x1000000)
>>>>> Setting currdev to disk0p2:
>>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x1021000,0xd8d4f80)
>>>>> Setting currdev to disk0p3:
>>>>> Loading /boot/defaults/loader.conf
>>>>> Loading /boot/defaults/loader.conf
>>>>> Loading /boot/device.hints
>>>>> Loading /boot/loader.conf
>>>>> Loading /boot/loader.conf.local
>>>>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_| !
> !
>>> |_| !
>>>>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop
>>>>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop
>>>>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop
>>>>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop
>>>>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop
>>>>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop
>>>>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop
>>>>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop
>>>>> [25;0HLoading kernel...
>>>>> /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e]
>>>>> Loading configured modules...
>>>>> /etc/hostid size=0x25
>>>>> /boot/entropy size=0x1000
>>>>> Using DTB provided by EFI at 0x80ec000.
>>>>> EFI framebuffer information:
>>>>> addr, size 0xf7800000, 0x3f4800
>>>>> dimensions 1920 x 1080
>>>>> stride 1920
>>>>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000
>>>>> ---<<BOOT>>---
>>>>> KDB: debugger backends: ddb
>>>>> KDB: current backend: ddb
>>>>> Copyright (c) 1992-2020 The FreeBSD Project.
>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>>>> The Regents of the University of California. All rights reserved.
>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>>>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021
>>>>> admin at lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
>>>>> FreeBSD clang version 11.0.0 (git at github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673)
>>>>> WARNING: WITNESS option enabled, expect reduced performance.
>>>>> VT(efifb): resolution 1920x1080
>>>>> module firmware already present!
>>>>> real memory = 4158373888 (3965 MB)
>>>>> avail memory = 4025094144 (3838 MB)
>>>>> Starting CPU 1 (1)
>>>>> Starting CPU 2 (2)
>>>>> Starting CPU 3 (3)
>>>>> Starting CPU 4 (100)
>>>>> Starting CPU 5 (101)
>>>>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
>>>>> random: unblocking device.
>>>>> random: entropy device external interface
>>>>> MAP f3f16000 mode 2 pages 4
>>>>> MAP f3f1b000 mode 2 pages 4
>>>>> MAP f6f40000 mode 2 pages 16
>>>>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
>>>>> kbd0 at kbdmux0
>>>>> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
>>>>> ofwbus0: <Open Firmware Device Tree>
>>>>> clk_fixed0: <Fixed clock> on ofwbus0
>>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
>>>>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0
>>>>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0
>>>>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0
>>>>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0
>>>>> regfix0: <Fixed Regulator> on ofwbus0
>>>>> regfix1: <Fixed Regulator> on ofwbus0
>>>>> regfix2: <Fixed Regulator> on ofwbus0
>>>>> regfix3: <Fixed Regulator> on ofwbus0
>>>>> regfix4: <Fixed Regulator> on ofwbus0
>>>>> regfix5: <Fixed Regulator> on ofwbus0
>>>>> regfix6: <Fixed Regulator> on ofwbus0
>>>>> regfix7: <Fixed Regulator> on ofwbus0
>>>>> regfix8: <Fixed Regulator> on ofwbus0
>>>>> regfix9: <Fixed Regulator> on ofwbus0
>>>>> regfix10: <Fixed Regulator> on ofwbus0
>>>>> regfix11: <Fixed Regulator> on ofwbus0
>>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0
>>>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0
>>>>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0
>>>>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0
>>>>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>>>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
>>>>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0
>>>>> gpiobus0: <OFW GPIO bus> on gpio0
>>>>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0
>>>>> gpiobus1: <OFW GPIO bus> on gpio1
>>>>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0
>>>>> gpiobus2: <OFW GPIO bus> on gpio2
>>>>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0
>>>>> gpiobus3: <OFW GPIO bus> on gpio3
>>>>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0
>>>>> gpiobus4: <OFW GPIO bus> on gpio4
>>>>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0
>>>>> iicbus0: <OFW I2C bus> on rk_i2c0
>>>>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0
>>>>> iicbus1: <OFW I2C bus> on rk_i2c1
>>>>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0
>>>>> iicbus2: <OFW I2C bus> on rk_i2c2
>>>>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
>>>>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0
>>>>> iicbus3: <OFW I2C bus> on rk_i2c3
>>>>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2
>>>>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
>>>>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
>>>>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
>>>>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0
>>>>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>>>> rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>>>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>>>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>>>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0
>>>>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0
>>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
>>>>> cpu0: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt0: <Generic cpufreq driver> on cpu0
>>>>> cpu1: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt1: <Generic cpufreq driver> on cpu1
>>>>> cpu2: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt2: <Generic cpufreq driver> on cpu2
>>>>> cpu3: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt3: <Generic cpufreq driver> on cpu3
>>>>> cpu4: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt4: <Generic cpufreq driver> on cpu4
>>>>> cpu5: <Open Firmware CPU> on cpulist0
>>>>> cpufreq_dt5: <Generic cpufreq driver> on cpu5
>>>>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0
>>>>> pcib0: Gen1 link training timeouted: 0x00080001.
>>>>> pci0: <PCI bus> on pcib0
>>>>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0
>>>>> pcib0: failed to reserve resource for pcib1
>>>>> pcib1: failed to allocate initial memory window: 0-0xfffff
>>>>> pci1: <PCI bus> on pcib1
>>>>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0
>>>>> rockchip_dwmmc0: Hardware version ID is 270a
>>>>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0
>>>>> rockchip_dwmmc1: Hardware version ID is 270a
>>>>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0
>>>>> rk_emmcphy0: got emmcclk clock
>>>>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk.
>>>>> sdhci_fdt0: 1 slot(s) allocated
>>>>> mmc0: <MMC/SD bus> on sdhci_fdt0
>>>>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0
>>>>> usbus0: EHCI version 1.0
>>>>> usbus0 on ehci0
>>>>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0
>>>>> usbus1 on ohci0
>>>>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0
>>>>> usbus2: EHCI version 1.0
>>>>> usbus2 on ehci1
>>>>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0
>>>>> usbus3 on ohci1
>>>>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
>>>>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30
>>>>> xhci0: 64 bytes context size, 32-bit DMA
>>>>> usbus4: trying to attach
>>>>> usbus4 on xhci0
>>>>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0
>>>>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31
>>>>> xhci1: 64 bytes context size, 32-bit DMA
>>>>> usbus5: trying to attach
>>>>> usbus5 on xhci1
>>>>> iicbus0: <unknown card> at addr 0x22
>>>>> iic0: <I2C generic I/O> on iicbus0
>>>>> iic1: <I2C generic I/O> on iicbus1
>>>>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0
>>>>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0
>>>>> uart1: console (1500000,n,8,1)
>>>>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0
>>>>> spibus0: <OFW SPI bus> on spi0
>>>>> spibus0: <unknown card> at cs 0 mode 0
>>>>> iicbus2: <unknown card> at addr 0x82
>>>>> iic2: <I2C generic I/O> on iicbus2
>>>>> iicbus3: <unknown card> at addr 0x44
>>>>> iic3: <I2C generic I/O> on iicbus3
>>>>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0
>>>>> pwmbus0: <OFW PWM bus> on pwm0
>>>>> pwmc0: <PWM Control> channel 0 on pwmbus0
>>>>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0
>>>>> pwmbus1: <OFW PWM bus> on pwm1
>>>>> pwmc1: <PWM Control> channel 0 on pwmbus1
>>>>> gpioc0: <GPIO controller> on gpio0
>>>>> gpioc1: <GPIO controller> on gpio1
>>>>> gpioc2: <GPIO controller> on gpio2
>>>>> gpioc3: <GPIO controller> on gpio3
>>>>> gpioc4: <GPIO controller> on gpio4
>>>>> gpioled0: <GPIO LEDs> on ofwbus0
>>>>> cryptosoft0: <software crypto>
>>>>> Timecounters tick every 1.000 msec
>>>>> usbus0: 480Mbps High Speed USB v2.0
>>>>> usbus1: 12Mbps Full Speed USB v1.0
>>>>> usbus2: 480Mbps High Speed USB v2.0
>>>>> usbus3: 12Mbps Full Speed USB v1.0
>>>>> usbus4: 5.0Gbps Super Speed USB v3.0
>>>>> usbus5: 5.0Gbps Super Speed USB v3.0
>>>>> ugen3.1: <Generic OHCI root HUB> at usbus3
>>>>> uhub0 on usbus3
>>>>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>>>>> ugen2.1: <Generic EHCI root HUB> at usbus2
>>>>> uhub1 on usbus2
>>>>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
>>>>> ugen1.1: <Generic OHCI root HUB> at usbus1
>>>>> uhub2 on usbus1
>>>>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>>>>> ugen0.1: <Generic EHCI root HUB> at usbus0
>>>>> uhub3 on usbus0
>>>>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
>>>>> ugen5.1: <Synopsys XHCI root HUB> at usbus5
>>>>> uhub4 on usbus5
>>>>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5
>>>>> ugen4.1: <Synopsys XHCI root HUB> at usbus4
>>>>> uhub5 on usbus4
>>>>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4
>>>>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block
>>>>> mmcsd0boot0: 4MB partition 1 at mmcsd0
>>>>> mmcsd0boot1: 4MB partition 2 at mmcsd0
>>>>> mmcsd0rpmb: 17MB partition 3 at mmcsd0
>>>>> Release APs...done
>>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0
>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
>>>>> Instruction Set Attributes 1 = <>
>>>>> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
>>>>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]...
>>>>> Processor Features 1 = <>
>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>>>> Memory Model Features 1 = <8bit VMID>
>>>>> Memory Model Features 2 = <32bit CCIDX,48bit VA>
>>>>> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
>>>>> Debug Features 1 = <>
>>>>> Auxiliary Features 0 = <>
>>>>> Auxiliary Features 1 = <>
>>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1
>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>>>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2
>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>>>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3
>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>>>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0
>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
>>>>> CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1
>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
>>>>> WARNING: WITNESS option enabled, expect reduced performance.
>>>>> Unresolved linked clock found: clkin_gmac
>>>>> uhub0: 1 port with 1 removable, self powered
>>>>> uhub2: 1 port with 1 removable, self powered
>>>>> uhub5: 2 ports with 2 removable, self powered
>>>>> uhub4: 2 ports with 2 removable, self powered
>>>>> Warning: no time-of-day clock registered, system time will not be set accurately
>>>>> uhub1: 1 port with 1 removable, self powered
>>>>> uhub3: 1 port with 1 removable, self powered
>>>>> Setting hostuuid: 31323634-3737-6236-6162-336630376339.
>>>>> Setting hostid: 0x5d4b60f9.
>>>>> Starting file system checks:
>>>>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS
>>>>> /dev/mmcsd0p3: clean, 27264803 free (363 frags, 3408055 blocks, 0.0% fragmentation)
>>>>> lock order reversal:
>>>>> 1st 0xffffa00062c99440 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724
>>>>> 2nd 0xffffa00062c99dc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918
>>>>> lock order devfs -> ufs established at:
>>>>> #0 0xffff000000569234 at witness_checkorder+0x448
>>>>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8
>>>>> #2 0xffff00000075ad38 at ffs_lock+0x64
>>>>> #3 0xffff0000005ed57c at _vn_lock+0x54
>>>>> #4 0xffff0000005ce630 at vfs_domount+0xdf8
>>>>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4
>>>>> #6 0xffff0000005d0e78 at kernel_mount+0x4c
>>>>> #7 0xffff0000005d3564 at parse_mount+0x49c
>>>>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc
>>>>> #9 0xffff00000048dc68 at start_init+0x24
>>>>> #10 0xffff0000004b7474 at fork_exit+0x7c
>>>>> lock order ufs -> devfs attempted at:
>>>>> #0 0xffff000000569a40 at witness_checkorder+0xc54
>>>>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50
>>>>> #2 0xffff0000005ed57c at _vn_lock+0x54
>>>>> #3 0xffff0000005d77d8 at vget_finish+0x4c
>>>>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0
>>>>> #5 0xffff0000003b12c0 at devfs_root+0x44
>>>>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154
>>>>> #7 0xffff0000005d89b0 at vflush+0x5c
>>>>> #8 0xffff0000003b11c8 at devfs_unmount+0x34
>>>>> #9 0xffff0000005cf4c4 at dounmount+0x43c
>>>>> #10 0xffff0000005cf040 at kern_unmount+0x2d8
>>>>> #11 0xffff000000812d0c at do_el0_sync+0x454
>>>>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90
>>>>> Mounting local filesystems:.
>>>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat
>>>>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1
>>>>> ukbd0 on uhub2
>>>>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1
>>>>> kbd1 at ukbd0
>>>>> Setting hostname: kazu.tfc.
>>>>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
>>>>> Feeding entropy: .
>>>>> lo0: link state changed to UP
>>>>> Starting Network: lo0.
>>>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>>>> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
>>>>> inet6 ::1 prefixlen 128
>>>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
>>>>> inet 127.0.0.1 netmask 0xff000000
>>>>> groups: lo
>>>>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>>>>> Starting devd.
>>>>> Autoloading module: mx25l.ko
>>>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
>>>>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K
>>>>> Autoloading module: pwm_backlight.ko
>>>>> link_elf: symbol backlight_get_info_desc undefined
>>>>> kldload: can't load pwm_backlight.ko: No such file or directory
>>>>> Autoloading module: uhid.ko
>>>>> Autoloading module: wmt.ko
>>>>> add host 127.0.0.1: gateway lo0 fib 0: route already in table
>>>>> route: writing to routing socket: Network is unreachable
>>>>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable
>>>>> add host ::1: gateway lo0 fib 0: route already in table
>>>>> add net fe80::: gateway ::1
>>>>> add net ff02::: gateway ::1
>>>>> add net ::ffff:0.0.0.0: gateway ::1
>>>>> add net ::0.0.0.0: gateway ::1
>>>>> Updating /var/run/os-release done.
>>>>> Creating and/or trimming log files.
>>>>> Updating motd:.
>>>>> Clearing /tmp (X related).
>>>>> Starting syslogd.
>>>>> No core dumps found.
>>>>> Mounting late filesystems:.
>>>>> Security policy loaded: MAC/ntpd (mac_ntpd)
>>>>> Starting ntpd.
>>>>> Feb 8 15:24:40 kazu ntpd[1000]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 43 days ago
>>>>> Performing sanity check on sshd configuration.
>>>>> Starting sshd.
>>>>> Starting cron.
>>>>> Starting sendmail.
>>>>> Starting sendmail_msp_queue.
>>>>> Feb 8 15:24:41 kazu ntpd[1000]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8)
>>>>> Configuring vt: blanktime screensaverkldload: can't load logo_saver: No such file or directory
>>>>> /etc/rc: WARNING: Unable to load kernel module logo_saver
>>>>> .
>>>>> Starting background file system checks in 60 seconds.
>>>>>
>>>>> Mon Feb 8 15:24:42 JST 2021
>>>>>
>>>>> FreeBSD/arm64 (kazu.tfc) (ttyu1)
>>>>>
>>>>> login:
>>>>>
>>>>>
>>>>>> regards
>>>>>>
>>>>>> /Jesper
>>>>>>
>>>>>>> root at kazu:~ # cu -s 1500000 -l /dev/cuaU0
>>>>>>> Connected
>>>>>>>
>>>>>>> U-Boot TPL 2020.10 (Feb 03 2021 - 11:13:01)
>>>>>>> Channel 0: LPDDR4, 50MHz
>>>>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
>>>>>>> Channel 1: LPDDR4, 50MHz
>>>>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
>>>>>>> 256B stride
>>>>>>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
>>>>>>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
>>>>>>> Trying to boot from BOOTROM
>>>>>>> Returning to boot ROM...
>>>>>>>
>>>>>>> U-Boot SPL 2020.10 (Feb 03 2021 - 11:13:01 +0900)
>>>>>>> Trying to boot from MMC2
>>>>>>>
>>>>>>>
>>>>>>> U-Boot 2020.10 (Feb 03 2021 - 11:13:01 +0900)
>>>>>>>
>>>>>>> SoC: Rockchip rk3399
>>>>>>> Reset cause: POR
>>>>>>> Model: Pine64 Pinebook Pro
>>>>>>> DRAM: 3.9 GiB
>>>>>>> PMIC: RK808
>>>>>>> MMC: mmc at fe310000: 2, mmc at fe320000: 1, sdhci at fe330000: 0
>>>>>>> Loading Environment from SPIFlash... Invalid bus 0 (err=-19)
>>>>>>> *** Warning - spi_flash_probe_bus_cs() failed, using default environment
>>>>>>>
>>>>>>> In: serial
>>>>>>> Out: serial
>>>>>>> Err: serial
>>>>>>> Model: Pine64 Pinebook Pro
>>>>>>> Net: No ethernet found.
>>>>>>> Failed to load 'splash.bmp'
>>>>>>> Card did not respond to voltage select!
>>>>>>> Hit any key to stop autoboot: 0
>>>>>>> Consoles: EFI console
>>>>>>> Read loader env vars from /efi/freebsd/loader.env
>>>>>>> Setting currdev to disk0p1:
>>>>>>> FreeBSD/arm64 EFI loader, Revision 1.1
>>>>>>> (Fri Jan 8 12:04:36 JST 2021 admin at lmainkx)
>>>>>>>
>>>>>>> Command line arguments: loader.efi
>>>>>>> Image base: 0xf3dee000
>>>>>>> EFI version: 2.80
>>>>>>> EFI Firmware: Das U-Boot (rev 8224.4096)
>>>>>>> Console: comconsole (0)
>>>>>>> Load Path: /efi\boot\bootaa64.efi
>>>>>>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000)
>>>>>>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000)
>>>>>>> Setting currdev to disk0p1:
>>>>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x21000,0x1000000)
>>>>>>> Setting currdev to disk0p2:
>>>>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x1021000,0xd8d4f80)
>>>>>>> Setting currdev to disk0p3:
>>>>>>> Loading /boot/defaults/loader.conf
>>>>>>> Loading /boot/defaults/loader.conf
>>>>>>> Loading /boot/device.hints
>>>>>>> Loading /boot/loader.conf
>>>>>>> Loading /boot/loader.conf.local
>>>>>>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_!
> | !
>>> !
>>>>> |_| !
>>>>>>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop
>>>>>>> [25;0H[23;4HAutoboot in 9 seconds, hit [Enter] to boot or any other key to stop
>>>>>>> [25;0H[23;4HAutoboot in 8 seconds, hit [Enter] to boot or any other key to stop
>>>>>>> [25;0H[23;4HAutoboot in 7 seconds, hit [Enter] to boot or any other key to stop
>>>>>>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop
>>>>>>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop
>>>>>>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop
>>>>>>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop
>>>>>>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop
>>>>>>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop
>>>>>>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop
>>>>>>> [25;0HLoading kernel...
>>>>>>> /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e]
>>>>>>> Loading configured modules...
>>>>>>> /etc/hostid size=0x25
>>>>>>> /boot/entropy size=0x1000
>>>>>>> Using DTB provided by EFI at 0x80ec000.
>>>>>>> EFI framebuffer information:
>>>>>>> addr, size 0xf7800000, 0x3f4800
>>>>>>> dimensions 1920 x 1080
>>>>>>> stride 1920
>>>>>>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000
>>>>>>> ---<<BOOT>>---
>>>>>>> KDB: debugger backends: ddb
>>>>>>> KDB: current backend: ddb
>>>>>>> Copyright (c) 1992-2020 The FreeBSD Project.
>>>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>>>>>> The Regents of the University of California. All rights reserved.
>>>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>>>>>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021
>>>>>>> admin at lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
>>>>>>> FreeBSD clang version 11.0.0 (git at github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673)
>>>>>>> WARNING: WITNESS option enabled, expect reduced performance.
>>>>>>> VT(efifb): resolution 1920x1080
>>>>>>> module firmware already present!
>>>>>>> real memory = 4158377984 (3965 MB)
>>>>>>> avail memory = 4025098240 (3838 MB)
>>>>>>> Starting CPU 1 (1)
>>>>>>> Starting CPU 2 (2)
>>>>>>> Starting CPU 3 (3)
>>>>>>> Starting CPU 4 (100)
>>>>>>> Starting CPU 5 (101)
>>>>>>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
>>>>>>> random: unblocking device.
>>>>>>> random: entropy device external interface
>>>>>>> MAP f3f16000 mode 2 pages 4
>>>>>>> MAP f3f1b000 mode 2 pages 4
>>>>>>> MAP f6f40000 mode 2 pages 16
>>>>>>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
>>>>>>> kbd0 at kbdmux0
>>>>>>> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
>>>>>>> ofwbus0: <Open Firmware Device Tree>
>>>>>>> clk_fixed0: <Fixed clock> on ofwbus0
>>>>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
>>>>>>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0
>>>>>>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0
>>>>>>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0
>>>>>>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0
>>>>>>> regfix0: <Fixed Regulator> on ofwbus0
>>>>>>> regfix1: <Fixed Regulator> on ofwbus0
>>>>>>> regfix2: <Fixed Regulator> on ofwbus0
>>>>>>> regfix3: <Fixed Regulator> on ofwbus0
>>>>>>> regfix4: <Fixed Regulator> on ofwbus0
>>>>>>> regfix5: <Fixed Regulator> on ofwbus0
>>>>>>> regfix6: <Fixed Regulator> on ofwbus0
>>>>>>> regfix7: <Fixed Regulator> on ofwbus0
>>>>>>> regfix8: <Fixed Regulator> on ofwbus0
>>>>>>> regfix9: <Fixed Regulator> on ofwbus0
>>>>>>> regfix10: <Fixed Regulator> on ofwbus0
>>>>>>> regfix11: <Fixed Regulator> on ofwbus0
>>>>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0
>>>>>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>>>>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0
>>>>>>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0
>>>>>>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0
>>>>>>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>>>>>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
>>>>>>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0
>>>>>>> gpiobus0: <OFW GPIO bus> on gpio0
>>>>>>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0
>>>>>>> gpiobus1: <OFW GPIO bus> on gpio1
>>>>>>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0
>>>>>>> gpiobus2: <OFW GPIO bus> on gpio2
>>>>>>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0
>>>>>>> gpiobus3: <OFW GPIO bus> on gpio3
>>>>>>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0
>>>>>>> gpiobus4: <OFW GPIO bus> on gpio4
>>>>>>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0
>>>>>>> iicbus0: <OFW I2C bus> on rk_i2c0
>>>>>>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0
>>>>>>> iicbus1: <OFW I2C bus> on rk_i2c1
>>>>>>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0
>>>>>>> iicbus2: <OFW I2C bus> on rk_i2c2
>>>>>>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
>>>>>>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0
>>>>>>> iicbus3: <OFW I2C bus> on rk_i2c3
>>>>>>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2
>>>>>>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
>>>>>>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
>>>>>>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
>>>>>>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0
>>>>>>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffffrk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>>>>>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>>>>>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
>>>>>>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0
>>>>>>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0
>>>>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
>>>>>>> cpu0: <Open Firmware CPU> on cpulist0
>>>>>>> cpufreq_dt0: <Generic cpufreq driver> on cpu0
>>>>>>> cpu1: <Open Firmware CPU> on cpulist0
>>>>>>> cpufreq_dt1: <Generic cpufreq driver> on cpu1
>>>>>>> cpu2: <Open Firmware CPU> on cpulist0
>>>>>>> cpufreq_dt2: <Generic cpufreq driver> on cpu2
>>>>>>> cpu3: <Open Firmware CPU> on cpulist0
>>>>>>> cpufreq_dt3: <Generic cpufreq driver> on cpu3
>>>>>>> cpu4: <Open Firmware CPU> on cpulist0
>>>>>>> cpufreq_dt4: <Generic cpufreq driver> on cpu4
>>>>>>> cpu5: <Open Firmware CPU> on cpulist0
>>>>>>> cpufreq_dt5: <Generic cpufreq driver> on cpu5
>>>>>>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0
>>>>>>> pcib0: Gen1 link training timeouted: 0x00080001.
>>>>>>> pci0: <PCI bus> on pcib0
>>>>>>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0
>>>>>>> pcib0: failed to reserve resource for pcib1
>>>>>>> pcib1: failed to allocate initial memory window: 0-0xfffff
>>>>>>> pci1: <PCI bus> on pcib1
>>>>>>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0
>>>>>>> rockchip_dwmmc0: Hardware version ID is 270a
>>>>>>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0
>>>>>>> rockchip_dwmmc1: Hardware version ID is 270a
>>>>>>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0
>>>>>>> rk_emmcphy0: got emmcclk clock
>>>>>>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk.
>>>>>>> sdhci_fdt0: 1 slot(s) allocated
>>>>>>> mmc0: <MMC/SD bus> on sdhci_fdt0
>>>>>>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0
>>>>>>> usbus0: EHCI version 1.0
>>>>>>> usbus0 on ehci0
>>>>>>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0
>>>>>>> usbus1 on ohci0
>>>>>>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0
>>>>>>> usbus2: EHCI version 1.0
>>>>>>> usbus2 on ehci1
>>>>>>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0
>>>>>>> usbus3 on ohci1
>>>>>>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
>>>>>>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30
>>>>>>> xhci0: 64 bytes context size, 32-bit DMA
>>>>>>> usbus4: trying to attach
>>>>>>> usbus4 on xhci0
>>>>>>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0
>>>>>>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31
>>>>>>> xhci1: 64 bytes context size, 32-bit DMA
>>>>>>> usbus5: trying to attach
>>>>>>> usbus5 on xhci1
>>>>>>> iicbus0: <unknown card> at addr 0x22
>>>>>>> iic0: <I2C generic I/O> on iicbus0
>>>>>>> iic1: <I2C generic I/O> on iicbus1
>>>>>>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0
>>>>>>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0
>>>>>>> uart1: console (1500000,n,8,1)
>>>>>>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0
>>>>>>> spibus0: <OFW SPI bus> on spi0
>>>>>>> spibus0: <unknown card> at cs 0 mode 0
>>>>>>> iicbus2: <unknown card> at addr 0x82
>>>>>>> iic2: <I2C generic I/O> on iicbus2
>>>>>>> iicbus3: <unknown card> at addr 0x44
>>>>>>> iic3: <I2C generic I/O> on iicbus3
>>>>>>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0
>>>>>>> pwmbus0: <OFW PWM bus> on pwm0
>>>>>>> pwmc0: <PWM Control> channel 0 on pwmbus0
>>>>>>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0
>>>>>>> pwmbus1: <OFW PWM bus> on pwm1
>>>>>>> pwmc1: <PWM Control> channel 0 on pwmbus1
>>>>>>> gpioc0: <GPIO controller> on gpio0
>>>>>>> gpioc1: <GPIO controller> on gpio1
>>>>>>> gpioc2: <GPIO controller> on gpio2
>>>>>>> gpioc3: <GPIO controller> on gpio3
>>>>>>> gpioc4: <GPIO controller> on gpio4
>>>>>>> gpioled0: <GPIO LEDs> on ofwbus0
>>>>>>> cryptosoft0: <software crypto>
>>>>>>> Timecounters tick every 1.000 msec
>>>>>>> usbus0: 480Mbps High Speed USB v2.0
>>>>>>> usbus1: 12Mbps Full Speed USB v1.0
>>>>>>> usbus2: 480Mbps High Speed USB v2.0
>>>>>>> usbus3: 12Mbps Full Speed USB v1.0
>>>>>>> usbus4: 5.0Gbps Super Speed USB v3.0
>>>>>>> usbus5: 5.0Gbps Super Speed USB v3.0
>>>>>>> ugen3.1: <Generic OHCI root HUB> at usbus3
>>>>>>> uhub0 on usbus3
>>>>>>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>>>>>>> ugen2.1: <Generic EHCI root HUB> at usbus2
>>>>>>> uhub1 on usbus2
>>>>>>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
>>>>>>> ugen1.1: <Generic OHCI root HUB> at usbus1
>>>>>>> uhub2 on usbus1
>>>>>>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>>>>>>> ugen0.1: <Generic EHCI root HUB> at usbus0
>>>>>>> uhub3 on usbus0
>>>>>>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
>>>>>>> ugen5.1: <Synopsys XHCI root HUB> at usbus5
>>>>>>> uhub4 on usbus5
>>>>>>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5
>>>>>>> ugen4.1: <Synopsys XHCI root HUB> at usbus4
>>>>>>> uhub5 on usbus4
>>>>>>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4
>>>>>>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block
>>>>>>> mmcsd0boot0: 4MB partition 1 at mmcsd0
>>>>>>> mmcsd0boot1: 4MB partition 2 at mmcsd0
>>>>>>> mmcsd0rpmb: 17MB partition 3 at mmcsd0
>>>>>>> Release APs...done
>>>>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0
>>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>>>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
>>>>>>> Instruction Set Attributes 1 = <>
>>>>>>> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
>>>>>>> Processor Features 1 = <>
>>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>>>>>> Memory Model Features 1 = <8bit VMID>
>>>>>>> Memory Model Features 2 = <32bit CCIDX,48bit VA>
>>>>>>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]...
>>>>>>> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
>>>>>>> Debug Features 1 = <>
>>>>>>> Auxiliary Features 0 = <>
>>>>>>> Auxiliary Features 1 = <>
>>>>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1
>>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>>>>>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2
>>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>>>>>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3
>>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
>>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>>>>>>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0
>>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
>>>>>>> CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1
>>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
>>>>>>> WARNING: WITNESS option enabled, expect reduced performance.
>>>>>>> Unresolved linked clock found: clkin_gmac
>>>>>>> uhub0: 1 port with 1 removable, self powered
>>>>>>> uhub2: 1 port with 1 removable, self powered
>>>>>>> Warning: no time-of-day clock registered, system time will not be set accurately
>>>>>>> uhub4: 2 ports with 2 removable, self powered
>>>>>>> uhub5: 2 ports with 2 removable, self powered
>>>>>>> uhub3: 1 port with 1 removable, self powered
>>>>>>> uhub1: 1 port with 1 removable, self powered
>>>>>>> Setting hostuuid: 31323634-3737-6236-6162-336630376339.
>>>>>>> Setting hostid: 0x5d4b60f9.
>>>>>>> Starting file system checks:
>>>>>>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS
>>>>>>> /dev/mmcsd0p3: clean, 27264816 free (352 frags, 3408058 blocks, 0.0% fragmentation)
>>>>>>> lock order reversal:
>>>>>>> 1st 0xffffa00062dabbe0 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724
>>>>>>> 2nd 0xffffa00062c9ddc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918
>>>>>>> lock order devfs -> ufs established at:
>>>>>>> #0 0xffff000000569234 at witness_checkorder+0x448
>>>>>>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8
>>>>>>> #2 0xffff00000075ad38 at ffs_lock+0x64
>>>>>>> #3 0xffff0000005ed57c at _vn_lock+0x54
>>>>>>> #4 0xffff0000005ce630 at vfs_domount+0xdf8
>>>>>>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4
>>>>>>> #6 0xffff0000005d0e78 at kernel_mount+0x4c
>>>>>>> #7 0xffff0000005d3564 at parse_mount+0x49c
>>>>>>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc
>>>>>>> #9 0xffff00000048dc68 at start_init+0x24
>>>>>>> #10 0xffff0000004b7474 at fork_exit+0x7c
>>>>>>> lock order ufs -> devfs attempted at:
>>>>>>> #0 0xffff000000569a40 at witness_checkorder+0xc54
>>>>>>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50
>>>>>>> #2 0xffff0000005ed57c at _vn_lock+0x54
>>>>>>> #3 0xffff0000005d77d8 at vget_finish+0x4c
>>>>>>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0
>>>>>>> #5 0xffff0000003b12c0 at devfs_root+0x44
>>>>>>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154
>>>>>>> #7 0xffff0000005d89b0 at vflush+0x5c
>>>>>>> #8 0xffff0000003b11c8 at devfs_unmount+0x34
>>>>>>> #9 0xffff0000005cf4c4 at dounmount+0x43c
>>>>>>> #10 0xffff0000005cf040 at kern_unmount+0x2d8
>>>>>>> #11 0xffff000000812d0c at do_el0_sync+0x454
>>>>>>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90
>>>>>>> Mounting local filesystems:.
>>>>>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat
>>>>>>> Setting hostname: kazu.tfc.
>>>>>>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1
>>>>>>> ukbd0 on uhub2
>>>>>>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1
>>>>>>> kbd1 at ukbd0
>>>>>>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
>>>>>>> Feeding entropy: .
>>>>>>> lo0: link state changed to UP
>>>>>>> Starting Network: lo0.
>>>>>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>>>>>> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
>>>>>>> inet6 ::1 prefixlen 128
>>>>>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
>>>>>>> inet 127.0.0.1 netmask 0xff000000
>>>>>>> groups: lo
>>>>>>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>>>>>>> Starting devd.
>>>>>>> Autoloading module: mx25l.ko
>>>>>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
>>>>>>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K
>>>>>>> Autoloading module: pwm_backlight.ko
>>>>>>> link_elf: symbol backlight_get_info_desc undefined
>>>>>>> kldload: can't load pwm_backlight.ko: No such file or directory
>>>>>>> Autoloading module: uhid.ko
>>>>>>> Autoloading module: wmt.ko
>>>>>>> add host 127.0.0.1: gateway lo0 fib 0: route already in table
>>>>>>> route: writing to routing socket: Network is unreachable
>>>>>>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable
>>>>>>> add host ::1: gateway lo0 fib 0: route already in table
>>>>>>> add net fe80::: gateway ::1
>>>>>>> add net ff02::: gateway ::1
>>>>>>> add net ::ffff:0.0.0.0: gateway ::1
>>>>>>> add net ::0.0.0.0: gateway ::1
>>>>>>> Updating /var/run/os-release done.
>>>>>>> Creating and/or trimming log files.
>>>>>>> Updating motd:.
>>>>>>> Clearing /tmp (X related).
>>>>>>> Starting syslogd.
>>>>>>> No core dumps found.
>>>>>>> Mounting late filesystems:.
>>>>>>> Security policy loaded: MAC/ntpd (mac_ntpd)
>>>>>>> Starting ntpd.
>>>>>>> Feb 3 18:00:15 kazu ntpd[1004]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 38 days ago
>>>>>>> Performing sanity check on sshd configuration.
>>>>>>> Starting sshd.
>>>>>>> Starting cron.
>>>>>>> Starting sendmail.
>>>>>>> Starting sendmail_msp_queue.
>>>>>>> Configuring vt: blanktime screensaverFeb 3 18:00:16 kazu ntpd[1004]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8)
>>>>>>> kldload: can't load logo_saver: No such file or directory
>>>>>>> /etc/rc: WARNING: Unable to load kernel module logo_saver
>>>>>>> .
>>>>>>> Starting background file system checks in 60 seconds.
>>>>>>>
>>>>>>> Wed Feb 3 18:00:16 JST 2021
>>>>>>>
>>>>>>> FreeBSD/arm64 (kazu.tfc) (ttyu1)
>>>>>>>
>>>>>>> login:
>>>>>>>
>>>>>>>
>>>>>>> [1] https://github.com/TrueFC/ports/tree/master/sysutils/u-boot-pinebook-pro
>>>>>>>> the twitter thread
>>>>>>>> https://twitter.com/jsm22413542/status/1355896239104159748
>>>>>>>>
>>>>>>>> Long story short I keep CPLL at 800000000 but set ACLK_VOP1 at 594000000..
>>>>>>>>
>>>>>>>>
>>>>>>>> /Jsm
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> freebsd-arm at freebsd.org mailing list
>>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>>>>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>>>>>>>>
>>>>>>> ---
>>>>>>> Kazuhiko Kiriyama <kiri at truefc.org>
>>>>>> _______________________________________________
>>>>>> freebsd-arm at freebsd.org mailing list
>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>>>>>>
>>>> _______________________________________________
>>>> freebsd-arm at freebsd.org mailing list
>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>>>>
>> _______________________________________________
>> freebsd-arm at freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>>
More information about the freebsd-arm
mailing list