NanoPi R1 Sample image test
Ganbold Tsagaankhuu
ganbold at gmail.com
Tue Aug 18 04:18:15 UTC 2020
On Tue, Aug 18, 2020 at 11:01 AM Furkan Salman <furkan at fkardame.com> wrote:
> Hello,
>
>
>
> I received my NanoPi R1 and NanoPi R2s of which R2s doesn't work I guess
> so was only able to test R1 images from Mr. Ganbold links which are quite
> old.
>
>
>
> Here is the boot log which is getting stuck at mountpoint as it fails to
> mount opnsense partition with rw access.
>
>
>
> U-Boot SPL 2019.01 (Mar 19 2019 - 16:56:16 +0800)
>
> DRAM: 1024 MiB
>
> Trying to boot from MMC1
>
>
>
> U-Boot 2019.01 (Mar 19 2019 - 16:56:16 +0800) Allwinner Technology
>
>
> CPU: Allwinner H3 (SUN8I 1680)
>
> Model: FriendlyArm NanoPi M1 Plus
>
> DRAM: 1 GiB
>
> MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
>
> Loading Environment from FAT... *** Warning - bad CRC, using default
> environment
>
> In: serial
>
> Out: serial
>
> Err: serial
>
> Net: No ethernet found.
>
> starting USB...
>
> USB0: USB EHCI 1.00
>
> USB1: USB OHCI 1.0
>
> USB2: USB EHCI 1.00
>
> USB3: USB OHCI 1.0
>
> USB4: USB EHCI 1.00
>
> USB5: USB OHCI 1.0
>
> scanning bus 0 for devices... 2 USB Device(s) found
>
> scanning bus 2 for devices... 1 USB Device(s) found
>
> scanning bus 4 for devices... 1 USB Device(s) found
>
> scanning usb for storage devices... 0 Storage Device(s) found
>
> Hit any key to stop autoboot: 0
>
> switch to partitions #0, OK
>
> mmc0(part 0) is current device
>
> Scanning mmc 0:1...
>
> 26950 bytes read in 2 ms (12.9 MiB/s)
>
> Found EFI removable media binary efi/boot/bootarm.efi
>
> Scanning disks on usb...
>
> Disk usb0 not ready
>
> Disk usb1 not ready
>
> Disk usb2 not ready
>
> Disk usb3 not ready
>
> Scanning disks on mmc...
>
> - ______ ____ _____ _____
> | ____| | _ \ / ____| __ \
> | |___ _ __ ___ ___ | |_) | (___ | | | |
> | ___| '__/ _ \/ _ \| _ < \___ \| | | |
> | | | | | __/ __/| |_) |____) | |__| |
> | | | | | | || | | |
> |_| |_| \___|\___||____/|_____/|_____/
> ```
> `
> ��═��═�═�═�═�═�═�═�═�═�═�═�═�═�═�═�═�═�═�═�═��═�═�═�═�═�═�═�═�═�═�═�═�═�═��-/
> ═
> �║ �║ +o .--` /y:`
> +.
> �║ 1. Boot Multi user [Enter] �║ yo`:. :o
> `+-
> �║ 2. Boot Single user �║ y/ -/`
> -o/
> �║ 3. Escape to loader prompt �║ .-
> ::/sy+:.
> �║ 4. Reboot �║ /
> `-- /
> �║ �║ `:
> :`
> ��║Options: �║ `:
> :`
> �║ 5. Kernel: default/kernel (1 of 1) �║ /
> /
> �║ 6. Boot Options �║ .-
> -.
> �║ �║ --
> -.
> �║ �║ `:` `:`
> �║ �║ .-- `--.
> ��═�═�═�═�═�═�═�═�═�═�═�═�═�═��═�═�═�═�═�═�═��═��═�═�═�═�═�═�═�═�═�═�═�═�═��
> ═
> Autoboot in 3 seconds, hit [Enter] to boot or any other key to stop
>
> Autoboot in 2 seconds, hit [Enter] to boot or any other key to stop
>
> Loading kernel...
>
> /boot/kernel/kernel text=0x853bb0 data=0xb5cc8+0x25d778
> syms=[0x4+0xa8e50+0x4+0x10cbbc]
> Loading configured modules...
>
> /boot/kernel/if_lagg.ko text=0x3f20 text=0x7a00 data=0x1088+0xf7c
> syms=[0x4+0x23e0+0x4+0x1535]
> /boot/kernel/ng_pppoe.ko text=0x1b20 text=0x3f20 data=0x1088
> syms=[0x4+0xf70+0x4+0x8b9]
> loading required module 'netgraph'
>
> /boot/kernel/netgraph.ko text=0x3f54 text=0x8f40 data=0x1088+0xfec
> syms=[0x4+0x2550+0x4+0x1de8]
> /boot/kernel/ng_ppp.ko text=0x1df0 text=0x4350 data=0x1088
> syms=[0x4+0xff0+0x4+0xa59]
> /boot/kernel/pflog.ko text=0xb33 text=0x820 data=0x1088
> syms=[0x4+0x9e0+0x4+0x748]
> loading required module 'pf'
>
> /boot/kernel/pf.ko text=0x8108 text=0x30c30 data=0x3088+0x1074
> syms=[0x4+0x5bf0+0x4+0x3608]
> /boot/kernel/ng_tcpmss.ko text=0xa38 text=0x6a0 data=0x1088
> syms=[0x4+0x690+0x4+0x48c]
> /boot/kernel/ng_bpf.ko text=0x1580 text=0x1320 data=0x1088
> syms=[0x4+0x9c0+0x4+0x6c8]
> /boot/kernel/ng_eiface.ko text=0x13e0 text=0x1200 data=0x1088
> syms=[0x4+0xf10+0x4+0x964]
> /boot/kernel/ng_ksocket.ko text=0x1974 text=0x1d10 data=0x1088
> syms=[0x4+0x1020+0x4+0x9c7]
> /boot/kernel/if_gif.ko text=0x1e64 text=0x3d60 data=0x1088+0xfa4
> syms=[0x4+0x1b70+0x4+0xff9]
> /boot/kernel/if_enc.ko text=0xf64 text=0x9b0 data=0x1088
> syms=[0x4+0xba0+0x4+0xbca]
> /boot/kernel/ng_tty.ko text=0xe1d text=0xf50 data=0x1088
> syms=[0x4+0xb60+0x4+0x58c]
> /boot/kernel/ng_tee.ko text=0xa98 text=0x7c0 data=0x1088
> syms=[0x4+0x760+0x4+0x46c]
> /boot/kernel/ng_car.ko text=0xe60 text=0x1110 data=0x1088
> syms=[0x4+0x970+0x4+0x59d]
> /boot/kernel/ng_pred1.ko text=0xf64 text=0xe40 data=0x1088
> syms=[0x4+0x8f0+0x4+0x5e1]
> /boot/kernel/ng_rfc1490.ko text=0xa4c text=0xbf0 data=0x1088
> syms=[0x4+0x810+0x4+0x486]
> /boot/kernel/ng_socket.ko text=0x178f text=0x1730 data=0x1088+0xf90
> syms=[0x4+0x12c0+0x4+0xe42]
> /boot/kernel/ng_pptpgre.ko text=0x1c98 text=0x2380 data=0x1088
> syms=[0x4+0xdc0+0x4+0x8d0]
> /boot/kernel/ng_deflate.ko text=0x1008 text=0xe90 data=0x1088
> syms=[0x4+0xb10+0x4+0x71f]
> /boot/kernel/ng_iface.ko text=0x177c text=0x10a0 data=0x1088
> syms=[0x4+0xfa0+0x4+0xae6]
> /boot/entropy size=0x1000
>
> /boot/kernel/ng_ether.ko text=0x1554 text=0x1350 data=0x1088+0xf7c
> syms=[0x4+0xeb0+0x4+0x94b]
> /boot/kernel/ng_mppc.ko text=0xf70 text=0x2cc0 data=0x1088+0xf7c
> syms=[0x4+0xc10+0x4+0x8c1]
> loading required module 'rc4'
>
> /boot/kernel/rc4.ko text=0x3d7 text=0xf8 data=0x1068
> syms=[0x4+0x2a0+0x4+0x229]
> /boot/kernel/ng_pipe.ko text=0x14d4 text=0x1e40 data=0x1088+0xf90
> syms=[0x4+0xc30+0x4+0x766]
> /boot/kernel/ng_one2many.ko text=0xe4c text=0xbc0 data=0x1088
> syms=[0x4+0x950+0x4+0x608]
> /boot/kernel/ng_echo.ko text=0x57d text=0x160 data=0x1088
> syms=[0x4+0x430+0x4+0x302]
> /boot/kernel/if_tap.ko text=0x1d38 text=0x2490 data=0x1088+0xfac
> syms=[0x4+0x15c0+0x4+0xb08]
> /boot/kernel/ng_lmi.ko text=0x111f text=0x16e0 data=0x1088
> syms=[0x4+0x900+0x4+0x48f]
> /boot/kernel/ng_l2tp.ko text=0x21b8 text=0x2990 data=0x1088
> syms=[0x4+0xde0+0x4+0x8ce]
> /boot/kernel/ng_vlan.ko text=0xe90 text=0xd20 data=0x1088
> syms=[0x4+0x8b0+0x4+0x55b]
> /boot/kernel/if_ure.ko text=0x1a20 text=0x50f0 data=0x1088+0xf80
> syms=[0x4+0x13d0+0x4+0xd26]
> /boot/kernel/ng_frame_relay.ko text=0x857 text=0x8d0 data=0x1088
> syms=[0x4+0x740+0x4+0x3f2]
> /boot/kernel/ng_hole.ko text=0x850 text=0x350 data=0x1088
> syms=[0x4+0x5d0+0x4+0x3db]
> /boot/kernel/if_bridge.ko text=0x2cc0 text=0x6580 data=0x1088+0xf7c
> syms=[0x4+0x2220+0x4+0x16a5]
> loading required module 'bridgestp'
>
> /boot/kernel/bridgestp.ko text=0x1138 text=0x4550 data=0x1088+0xf90
> syms=[0x4+0xf20+0x4+0x870]
> /boot/kernel/ng_async.ko text=0x10d0 text=0xe80 data=0x1088
> syms=[0x4+0x9d0+0x4+0x64c]
> /boot/kernel/pfsync.ko text=0x2cb4 text=0x7b70 data=0x1088+0xf7c
> syms=[0x4+0x1cb0+0x4+0x12b3]
> /boot/kernel/carp.ko text=0x2dac text=0x6110 data=0x1088+0xfa4
> syms=[0x4+0x1e40+0x4+0x1333]
> /boot/kernel/ng_bridge.ko text=0x15dc text=0x1550 data=0x1088+0xf98
> syms=[0x4+0xb80+0x4+0x7f5]
> /boot/kernel/if_tun.ko text=0x235e text=0x2960 data=0x1088+0xf9c
> syms=[0x4+0x1aa0+0x4+0xdf1]
> /boot/kernel/ng_UI.ko text=0x78f text=0x4a0 data=0x1088
> syms=[0x4+0x690+0x4+0x396]
> /boot/kernel/ng_cisco.ko text=0xee4 text=0xfe0 data=0x1088
> syms=[0x4+0xa30+0x4+0x5ad]
> /boot/kernel/if_gre.ko text=0x1e4c text=0x3790 data=0x1088+0xf9c
> syms=[0x4+0x19c0+0x4+0xf24]
> /boot/kernel/ng_vjc.ko text=0x1154 text=0x1910 data=0x1088
> syms=[0x4+0x9d0+0x4+0x61b]
> Using DTB provided by EFI at 0x47ef6000.
>
> Loading DTB overlays: 'sun8i-h3-sid.dtbo,sun8i-h3-ths.dtbo'
>
> /boot/dtb/overlays/sun8i-h3-sid.dtbo size=0x210
>
> /boot/dtb/overlays/sun8i-h3-ths.dtbo size=0x3ba
>
> Kernel entry at 0x71000180...
>
> Kernel args: (null)
>
> applying DTB overlay '/boot/dtb/overlays/sun8i-h3-sid.dtbo'
>
> applying DTB overlay '/boot/dtb/overlays/sun8i-h3-ths.dtbo'
>
> EHCI failed to shut down host controller.
>
> EHCI failed to shut down host controller.
>
> EHCI failed to shut down host controller.
>
> ---<<BOOT>>---
>
> KDB: debugger backends: ddb
>
> KDB: current backend: ddb
>
> Copyright (c) 1992-2019 The FreeBSD Project.
>
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>
> The Regents of the University of California. All rights reserved.
>
> FreeBSD is a registered trademark of The FreeBSD Foundation.
>
> FreeBSD 13.0-CURRENT #37 r345944M: Tue Apr 23 18:10:40 +08 2019
>
> tsgan at beastie:/usr/obj/usr/src/arm.armv7/sys/GENERIC arm
>
> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM
> 8.0.0)
> WARNING: WITNESS option enabled, expect reduced performance.
>
> VT: init without driver.
>
> module_register: cannot register ofwbus/pcib from kernel; already loaded
> from kernel
> Module ofwbus/pcib failed to register: 17
>
> module_register: cannot register simplebus/pcib from kernel; already
> loaded from kernel
> Module simplebus/pcib failed to register: 17
>
> CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000)
>
> CPU Features:
>
> Multiprocessing, Thumb2, Security, Virtualization, Generic Timer,
> VMSAv7,
> PXN, LPAE, Coherent Walk
>
> Optional instructions:
>
> SDIV/UDIV, UMULL, SMULL, SIMD(ext)
>
> LoUU:2 LoC:3 LoUIS:2
>
> Cache level 1:
>
> 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
>
> 32KB/32B 2-way instruction cache Read-Alloc
>
> Cache level 2:
>
> 512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
>
> real memory = 1039556608 (991 MB)
>
> avail memory = 997736448 (951 MB)
>
> No PSCI/SMCCC call function found
>
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>
> random: unblocking device.
>
> random: entropy device external interface
>
> kbd0 at kbdmux0
>
> ofwbus0: <Open Firmware Device Tree>
>
> aw_ccu0: <Allwinner Clock Control Unit> on ofwbus0
>
> clk_fixed0: <Fixed clock> on aw_ccu0
>
> clk_fixed1: <Fixed clock> on aw_ccu0
>
> clk_fixed2: <Fixed clock> on aw_ccu0
>
> simplebus0: <Flattened device tree simple bus> on ofwbus0
>
> ccu_h3ng0: <Allwinner H3/H5 Clock Control Unit NG> mem 0x1c20000-0x1c203ff
> on simplebus0
> regfix0: <Fixed Regulator> on ofwbus0
>
> regfix1: <Fixed Regulator> on ofwbus0
>
> regfix2: <Fixed Regulator> on ofwbus0
>
> regfix3: <Fixed Regulator> on ofwbus0
>
> ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem
> 0x1f01400-0x1f014ff on simplebus0
> aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on
> simplebus0
> gic0: <ARM Generic Interrupt Controller> mem
> 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x10
> gic0: pn 0x1, arch 0x2, rev 0x1, implementer 0x43b irqs 160
>
> gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq
> 19,20 on simplebus0
> gpiobus0: <OFW GPIO bus> on gpio0
>
> gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 44
> on simplebus0
> gpiobus1: <OFW GPIO bus> on gpio1
>
> rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 40,41 on simplebus0
>
> rtc0: registered as a time-of-day clock, resolution 1.000000s
>
> generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
>
> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
>
> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
>
> aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0
>
> awusbphy0: <Allwinner USB PHY> mem
> 0x1c19400-0x1c1942b,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803,0x1c1c800-0x10
> aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c250ff
> irq 4 on simplebus0
> a31dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 5 on
> simplebus0
> aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff
> irq 7 on simplebus0
> mmc0: <MMC/SD bus> on aw_mmc0
>
> aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c10000-0x1c10fff
> irq 8 on simplebus0
> mmc1: <MMC/SD bus> on aw_mmc1
>
> aw_mmc2: <Allwinner Integrated MMC/SD controller> mem 0x1c11000-0x1c11fff
> irq 9 on simplebus0
> mmc2: <MMC/SD bus> on aw_mmc2
>
> ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff
> irq 13 on simplebus0
> usbus0: EHCI version 1.0
>
> usbus0 on ehci0
>
> ohci0: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 14 on
> simplebus0
> usbus1 on ohci0
>
> ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1c0ff
> irq 15 on simplebus0
> usbus2: EHCI version 1.0
>
> usbus2 on ehci1
>
> ohci1: <Generic OHCI Controller> mem 0x1c1c400-0x1c1c4ff irq 16 on
> simplebus0
> usbus3 on ohci1
>
> ehci2: <Allwinner Integrated USB 2.0 controller> mem 0x1c1d000-0x1c1d0ff
> irq 17 on simplebus0
> usbus4: EHCI version 1.0
>
> usbus4 on ehci2
>
> ohci2: <Generic OHCI Controller> mem 0x1c1d400-0x1c1d4ff irq 18 on
> simplebus0
> usbus5 on ohci2
>
> gpioc0: <GPIO controller> on gpio0
>
> awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 23 on
> simplebus0
> miibus0: <MII bus> on awg0
>
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on
> miibus0
> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baw
> rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 7 on
> miibus0
> rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baw
> awg0: Ethernet address: 02:02:53:04:22:5c
>
> aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 26 on
> simplebus0
> uart0: console (115384,n,8,1)mem 0x1c28000-0x1c283ff irq 31 on simplebus0
>
> uart1: <16750 or compatible> mem 0x1c28c00-0x1c28fff irq 34 on simplebus0
>
> aw_ir0: <Allwinner CIR controller> mem 0x1f02000-0x1f023ff irq 42 on
> simplebus0
> aw_ir0: hwreset_get_by_ofw_idx = 0
>
> gpioc1: <GPIO controller> on gpio1
>
> cpulist0: <Open Firmware CPU Group> on ofwbus0
>
> cpu0: <Open Firmware CPU> on cpulist0
>
> cpu1: <Open Firmware CPU> on cpulist0
>
> cpu2: <Open Firmware CPU> on cpulist0
>
> cpu3: <Open Firmware CPU> on cpulist0
>
> gpioled0: <GPIO LEDs> on ofwbus0
>
> cryptosoft0: <software crypto>
>
> Timecounters tick every 1.000 msec
>
> usbus0: 480Mbps High Speed USB v2.0
>
> usbus1: 12Mbps Full Speed USB v1.0
>
> usbus2: 480Mbps High Speed USB v2.0
>
> usbus3: 12Mbps Full Speed USB v1.0
>
> usbus4: 480Mbps High Speed USB v2.0
>
> ugen1.1: <Generic OHCI root HUB> at usbus1
>
> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus1
> ugen2.1: <Allwinner EHCI root HUB> at usbus2
>
> uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> usbus2
> ugen3.1: <Generic OHCI root HUB> at usbus3
>
> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus3
> ugen4.1: <Allwinner EHCI root HUB> at usbus4
>
> uhub3: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> usbus4
> ugen0.1: <Allwinner EHCI root HUB> at usbus0
>
> uhub4: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> usbus0
> usbus5: 12Mbps Full Speed USB v1.0
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> ugen5.1: <Generic OHCI root HUB> at usbus5
>
> uhub5: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus5
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_ERR AW_MMC_INT_RESP_CRC_ERR
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> mmc0: CMD3 failed, RESULT: 1
>
> mmc0: Error setting RCA 1
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> mmc1: No compatible cards found on bus
>
> aw_mmc1: Spurious interrupt - no active request, rint: 0x00000004
>
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> uhub0: 1 port with 1 removable, self powered
>
> uhub2: 1 port with 1 removable, self powered
>
> AW_MMC_INT_DATA_END_BIT_ERR
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> mmcsd0: 8GB <MMCHC 8GTF4R 0.6 SN 979C5F19 MFG 02/2020 by 21 0x0000> at
> mmc2 52.0MHz/8bit/32768-block
> mmcsd0boot0: 4MB partion 1 at mmcsd0
>
> mmcsd0boot1: 4MB partion 2 at mmcsd0
>
> mmcsd0rpmb: 524kB partion 3 at mmcsd0
>
> Release APs
>
> WARNING: WITNESS option enabled, expect reduced performance.
>
> uhub5: 1 port with 1 removable, self powered
>
> Trying to mount root from ufs:/dev/ufs/OPNsense [rw]...
>
> Root mount waiting for: usbus4 usbus2 usbus0
>
> uhub3: 1 port with 1 removable, self powered
>
> uhub1: 1 port with 1 removable, self powered
>
> uhub4: 1 port with 1 removable, self powered
>
> ugen0.2: <Realtek USB 10/100 LAN> at usbus0
>
> ure0 on uhub4
>
> ure0: <Realtek USB 10/100 LAN, class 0/0, rev 2.10/20.00, addr 2> on
> usbus0
> mountroot: waiting for device /dev/ufs/OPNsense...
>
> ure0: MAC assigned randomly
>
> miibus1: <MII bus> on ure0
>
> rlphy0: <RTL8201E 10/100 media interface> PHY 0 on miibus1
>
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>
> ue0: <USB Ethernet> on ure0
>
> ue0: Ethernet address: aa:45:b5:64:b1:70
>
> Mounting from ufs:/dev/ufs/OPNsense failed with error 19.
>
>
> Loader variables:
>
> vfs.root.mountfrom=ufs:/dev/ufs/OPNsense
>
> vfs.root.mountfrom.options=rw
>
>
> Manual root filesystem specification:
>
> <fstype>:<device> [options]
>
> Mount <device> using filesystem <fstype>
>
> and with the specified (optional) option list.
>
>
> eg. ufs:/dev/da0s1a
>
> zfs:zroot/ROOT/default
>
> cd9660:/dev/cd0 ro
>
> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
>
>
> ? List valid disk boot devices
>
What does it show if you type ? in mountroot prompt?
thanks,
Ganbold
>
> . Yield 1 second (for background tasks)
>
> <empty line> Abort manual input
>
>
> mountroot> ls
>
> Invalid file system specification.
>
>
> mountroot>
>
>
>
> From the above logs I see that both the ethernet cards were detected.
>
> I then tried the FreeBSD image from the same link and it have the same
> issue.
>
> Link: https://people.freebsd.org/~ganbold/
>
>
> Is anyone else working on armv7 NanoPi R1?
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>
More information about the freebsd-arm
mailing list