A current BB Black issues

[Bernd Walter]

On Thu, Nov 06, 2014 at 11:31:07PM -0800, Rui Paulo wrote:
> On Nov 6, 2014, at 14:56, George Rosamond <george at ceetonetechnology.com> wrote:
> > BeagleBone Black with:
> > 
> > FreeBSD bbb-fbsd 10.1-PRERELEASE FreeBSD 10.1-PRERELEASE #0 r274186: Thu
> > Nov  6 14:51:29 EST 2014
> > root at stinkyX:/data/crochet/work/bbw/obj/arm.armv6/data/fbsd-10-stable/sys/BEAGLEBONE
> > arm
> > 
> > 
> > First, I tried to run copy-to-emmc.sh but noticed this is the dmesg:
> > 
> > sdhci_ti1-slot0: Got data interrupt 0x00000002, but there is no active
> > command.
> > sdhci_ti1-slot0: ============== REGISTER DUMP ==============
> > sdhci_ti1-slot0: Sys addr: 0x00000000 | Version:  0x00003101
> > sdhci_ti1-slot0: Blk size: 0x00000004 | Blk cnt:  0x00000001
> > sdhci_ti1-slot0: Argument: 0x00020000 | Trn mode: 0x0000071b
> > sdhci_ti1-slot0: Present:  0x01f70000 | Host ctl: 0x00000000
> > sdhci_ti1-slot0: Power:    0x0000000d | Blk gap:  0x00000000
> > sdhci_ti1-slot0: Wake-up:  0x00000000 | Clock:    0x00008007
> > sdhci_ti1-slot0: Timeout:  0x00000006 | Int stat: 0x00000000
> > sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
> > sdhci_ti1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
> > sdhci_ti1-slot0: Caps:     0x06e10080 | Max curr: 0x00000000
> > sdhci_ti1-slot0: ===========================================
> > sdhci_ti1-slot0: Got data interrupt 0x00000002, but there is no active
> > command.
> > sdhci_ti1-slot0: ============== REGISTER DUMP ==============
> > sdhci_ti1-slot0: Sys addr: 0x00000000 | Version:  0x00003101
> > sdhci_ti1-slot0: Blk size: 0x00000004 | Blk cnt:  0x00000001
> > sdhci_ti1-slot0: Argument: 0x00020000 | Trn mode: 0x0000071b
> > sdhci_ti1-slot0: Present:  0x01f70000 | Host ctl: 0x00000000
> > sdhci_ti1-slot0: Power:    0x0000000d | Blk gap:  0x00000000
> > sdhci_ti1-slot0: Wake-up:  0x00000000 | Clock:    0x00008007
> > sdhci_ti1-slot0: Timeout:  0x00000006 | Int stat: 0x00000000
> > sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
> > sdhci_ti1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
> > sdhci_ti1-slot0: Caps:     0x06e10080 | Max curr: 0x00000000
> > sdhci_ti1-slot0: ===========================================
> > am335x_pmic0: TPS65217C ver 1.2 powered by USB
> > 
> > and mmcsd1 isn't showing up in /dev/, the boot process, etc.  It will
> > boot from eMMC if I don't hold down the button by the microSD card.
> > 
> > Anything I should be aware of?
> 
> My speculation is that the newer U-Boot breaks the eMMC support in FreeBSD.  An U-Boot from 2013.4 seems to work fine while the U-Boot from 2014.3 doesn't work for me.

Just a few weeks ago I tried copy-to-emmc.sh.
A couple reverse order messages later it completed, but my BBBs ROM code
didn't find anything bootable on it and failed back to xmodem.

-- 
B.Walter <bernd at bwct.de> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.