BBB 1GHz patches for u-boot 2014-01

[fabiodive]

OK,

I would like to add a couple of details:

-I patched the u-boot 2014-01 with the last patch set from Xuebing,
it works very good, I suppose at 1GHz, 

-I get the panic during intensive sdcard write operation such as
download, untar or install a port.

-this maybe related with the new crochet version is 
the eMMC is not recognised, I don't have the /dev/mmcsd1 device
so I can't copy the system on the flash.

thanks for your reply,
f.


On Apr 26, 2014, at 23:17 , Winston Smith <smith.winston.101 at gmail.com> wrote:

> I saw something similar, but it didn't panic:
> 
> sdhci_ti1-slot0: Got data interrupt 0x00100000, but there is no active command.
> sdhci_ti1-slot0: ============== REGISTER DUMP ==============
> sdhci_ti1-slot0: Sys addr: 0x00000000 | Version:  0x00003101
> sdhci_ti1-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000000
> sdhci_ti1-slot0: Argument: 0x06c8d600 | Trn mode: 0x0000183a
> sdhci_ti1-slot0: Present:  0x01e70000 | Host ctl: 0x00000004
> sdhci_ti1-slot0: Power:    0x0000000d | Blk gap:  0x00000000
> sdhci_ti1-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
> sdhci_ti1-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
> sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
> sdhci_ti1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
> sdhci_ti1-slot0: Caps:     0x06e10080 | Max curr: 0x00000000
> sdhci_ti1-slot0: ===========================================
> mmcsd1: Error indicated: 1 Timeout
> 
> 
> I think perhaps FreeBSD-CURRENT is a bit too bleeding edge ... I have
> been trying to get 10-STABLE to work, it's fine on the SD card, but it
> hangs during boot on the eMMC.  However 11-CURRENT boots ok on the
> eMMC, but has issues like this.
> 
> -W.