BBB 1GHz patches for u-boot 2014-01

[Winston Smith]

I saw something similar, but it didn't panic:

sdhci_ti1-slot0: Got data interrupt 0x00100000, but there is no active command.
sdhci_ti1-slot0: ============== REGISTER DUMP ==============
sdhci_ti1-slot0: Sys addr: 0x00000000 | Version:  0x00003101
sdhci_ti1-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000000
sdhci_ti1-slot0: Argument: 0x06c8d600 | Trn mode: 0x0000183a
sdhci_ti1-slot0: Present:  0x01e70000 | Host ctl: 0x00000004
sdhci_ti1-slot0: Power:    0x0000000d | Blk gap:  0x00000000
sdhci_ti1-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_ti1-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_ti1-slot0: Caps:     0x06e10080 | Max curr: 0x00000000
sdhci_ti1-slot0: ===========================================
mmcsd1: Error indicated: 1 Timeout


I think perhaps FreeBSD-CURRENT is a bit too bleeding edge ... I have
been trying to get 10-STABLE to work, it's fine on the SD card, but it
hangs during boot on the eMMC.  However 11-CURRENT boots ok on the
eMMC, but has issues like this.

-W.