amd64 on Asus K8V SE Deluxe

Alex D'Elia acme at
Sat Oct 2 07:43:50 PDT 2004

> On Thursday 30 September 2004 13:40, Adriaan de Groot wrote:
> > I started using amd64 on a K8VSE with - I think 5.1 - and have been
> > following 5-CURRENT since then; it works fine most of the time. WHether the
> > _install_ CDs work nicely, I can't really say.
> Same thing here - loaded OS as 5.2.1 on K8V SE, and then CVSup'ed to
> FreeBSD-5.3BETA - works great since.
> regards,
> M.

Hello there....

I got the same motherboard, and ( as I already wrote to the mailing list )
I could not install on the ATA HD, because of the TIMEOUTS and FAILURES.
So I did get myself a new SATA which is connected to the Promise Controller
and is working happily.
Installation from amd64-BETA6 went fine, and i got the system up and running.

You are saying that you are working on it since a while now,
so maybe you know how to configure the sound card with the proper driver.
I got ofcourse the 

device	sound

but i dont know which should be the specific device ( ex. snd_ad1816 )
cause i could not find in the docs the sound device for the 
ADI AD1980 SoundMAX ......

If you got a clue, before i would go by try&error :)
would be greatly appriciated.

I am posting to the mailing list too, cause I believe this would be
of interest for other users :)

Down follows the dmesg report::


FreeBSD 5.3-BETA6 #0: Fri Oct  1 21:33:47 CEST 2004
    root at ...................:/usr/src/sys/amd64/compile/WUSHU
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 2800+ (1802.32-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 1072889856 (1023 MB)
avail memory = 1025978368 (978 MB)
ioapic0: Changing APIC ID to 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0xbc00-0xbc7f mem 0xf7a00000-0xf7a007ff irq 16 at device 7.0 on
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:79:68:fb
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:79:68:fb
fwe0: Ethernet address: 02:e0:18:79:68:fb
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <Promise PDC20378 SATA150 controller> port 0xcc00-0xcc7f,0xdc00-0xdc0f,0xec00-0xec3f mem 0x
f7b00000-0xf7b1ffff,0xf7c00000-0xf7c00fff irq 18 at device 8.0 on pci0
atapci0: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
skc0: <Marvell Gigabit Ethernet> port 0xb000-0xb0ff mem 0xf7e00000-0xf7e03fff irq 17 at device 10.0 
on pci0
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:11:2f:10:3c:64
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
atapci1: <VIA 6420 SATA150 controller> port 0xd000-0xd0ff,0xd400-0xd40f,0xd800-0xd803,0xe000-0xe007,
0xe400-0xe403,0xe800-0xe807 irq 20 at device 15.0 on pci0
ata5: channel #0 on atapci1
ata6: channel #1 on atapci1
atapci2: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at dev
ice 15.1 on pci0
ata0: channel #0 on atapci2
ata1: channel #1 on atapci2
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0

*** pci0: <multimedia, audio> at device 17.5 (no driver attached) ***

acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x2f8-0x2ff irq 3 on acpi0
sio0: type 16550A
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1802317472 Hz quality 800
Timecounters tick every 0.976 msec
ATAPI_RESET time = 1770us
acd0: DVDR <HL-DT-ST DVDRAM GSA-4082B/A201> at ata1-master UDMA33
ad4: 156334MB <Maxtor 6Y160M0/YAR51HW0> [317632/16/63] at ata2-master SATA150
Mounting root from ufs:/dev/ad4s1a

** acme aka Alex D'Elia		-->
** mail:: acme at

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url :

More information about the freebsd-amd64 mailing list