amd64/67745: boot fails on compaq presario r3000z
Conrad J. Sabatier
conrads at cox.net
Fri Nov 19 04:37:59 PST 2004
On Fri, 19 Nov 2004 05:40:37 GMT, Ade Lovett <ade at freebsd.org> wrote:
> The following reply was made to PR amd64/67745; it has been noted by
> From: Ade Lovett <ade at FreeBSD.org>
> To: freebsd-gnats-submit at FreeBSD.org, jhb at FreeBSD.org
> Subject: Re: amd64/67745: boot fails on compaq presario r3000z
> Date: Thu, 18 Nov 2004 21:30:53 -0800
> Well FWIW, yes, this patch does seem to move things along a little
> for my R3000Z - it now boots, but gets stuck further down the line
> ata0-master: setting PIO4 on nVidia nForce3 chip
> ata0-master: setting UDMA100 on nVidia nForce3 chip
> ad0: <TOSHIBA MK8026GAX/PA002G> ATA-6 disk at ata0-master
> [more ad0 identifying info]
> GEOM: new disk ad0
> ata1-master: setting PIO4 on nVidia nForce3 chip
> acd0: <SD-R2512/1A04> CDRW drive at ata1 as master
> [mode acd0 identifying info]
> [fdisk table]
> GEOM: Configure ad0s1, start 32256 length 62915134454 end 62915166719
> GEOM: Configure ad0s2, start 62915166720 length 17108582400 end
> At this point, the machine freezes solid.
> Now, this could be down to the way I built the miniinst (essentially
> by hand-stepping through make release on an x86->amd64 cross-compile
> -- my other amd64-based box is completely shot thanks to the local
> power company) -- I'd need a native amd64-built miniinst to confirm.
You may want to try toggling hw.apic.mixed_mode="1" in the loader. My
machine, for instance, won't boot properly with mixed mode disabled.
Conrad J. Sabatier <conrads at cox.net> -- "In Unix veritas"
More information about the freebsd-amd64