[PATCH] if_sk(4) rx/tx "hangs"

[David Kleiner]

Hi,

Another data point.  Having given up on getting a good sk NIC on a
-current box, I installed a realtek rl-identified card.

Here is what I get when trying to load up the if_sk.ko module:

Nov 15 15:31:58 macropus kernel: skc0: <Marvell Gigabit Ethernet> port
0xa800-0xa8ff mem 0xfab00000-0xfab03fff irq 17 at device 10.0 on pci0
Nov 15 15:31:58 macropus kernel: skc0: Yukon Gigabit Ethernet
10/100/1000Base-T Adapter
Nov 15 15:31:58 macropus kernel: skc0: PN: Yukon 88E8001
Nov 15 15:31:58 macropus kernel: skc0: EC: Rev. 1.3
Nov 15 15:31:58 macropus kernel: skc0: MN: Marvell
Nov 15 15:31:58 macropus kernel: skc0: SN: AbCdEfG334454
Nov 15 15:31:58 macropus kernel: sk0: <Marvell Semiconductor, Inc.
Yukon> on skc0
Nov 15 15:31:58 macropus kernel: sk0: no memory for jumbo buffers!
Nov 15 15:31:58 macropus kernel: sk0: jumbo buffer allocation failed
Nov 15 15:31:58 macropus kernel: device_attach: sk0 attach returned 12

This is an Asus "A8V Deluxe (v. 2.0) K8T800 No-WiFi/A" and 6.0-CURRENT
built on Sat Nov 13 12:08:59 PST 2004.

I also had it crashed while running a 700MB bittorrent transfer (stock
py-bittorrent) but did not get a crash dump.  The stack trace pointed
at problem with networking and calling "panic" at the db> prompt
wedged it solid.

Thank you,

David