Errors encountered when performing hibernate / suspend

Thu May 13 14:16:18 UTC 2010

Hi!

First, thank you very much for your help. I am very new to FreeBSD, so do bear with me for a while. Anyway, the problem is as follows:

Whenever I tried to hibernate, it will not be successful and I get the following error at my ~/.xession-error file:

** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer.
** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer.

** (xfce4-session:1124): WARNING **: xfsm-shutdown-helper.c:234: Failed to contact HAL: No back-end for your operating system

When I tried to suspend, it will not be successful and I will get the error message at my ~/.xession-error file:

** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer.
** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer.
thunar-volman: No property info.capabilities on device with id /org/freedesktop/Hal/devices/usb_device_45e_83_noserial.

I read the Handbook and I thought it may help by trying out the command "acpiconf -s1". Of course it is not successful and the error message ar ~/.xsession-error is:

** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer.
** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer.
thunar-volman: No property info.capabilities on device with id /org/freedesktop/Hal/devices/usb_device_45e_83_noserial.

while the following is my "dmesg" output:

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009
    root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (996.77-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 537395200 (512 MB)
avail memory = 510431232 (486 MB)
ACPI APIC Table: <COMPAQ SOLANO  >
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <COMPAQ CPQ0005> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> on hostb0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0x41000000-0x41ffffff,0x44000000-0x45ffffff irq 18 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0x1000-0x103f mem 0x40000000-0x40000fff irq 20 at device 8.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82562EM 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:a5:94:97:26
fxp0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2460-0x246f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x2440-0x245f irq 23 at device 31.4 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0030
usbus0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci0
pcm0: <Intel ICH2 (82801BA)> port 0x2000-0x20ff,0x2400-0x243f irq 17 at device 31.5 on pci0
pcm0: [ITHREAD]
pcm0: <Analog Devices AD1885 AC97 Codec>
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE
ppbus0: Probing for PnP devices:
ppbus0: <Canon S400SP/1.06> PRINTER BJL,BJRaster3,BSCC,TXT01,BJScan2
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 996770364 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ad0: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata0-master UDMA100
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
acd0: CDROM <LTN486S/YQS8> at ata1-master PIO4
pcm0: measured ac97 link rate at 55945 Hz
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <Microsoft> at usbus0
ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Trying to mount root from ufs:/dev/ad0s1a
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x20 ascq=0x00 
acd0: FAILURE - READ_DISK_INFO ILLEGAL REQUEST asc=0x20 ascq=0x00 
acd0: FAILURE - READ_DISK_INFO ILLEGAL REQUEST asc=0x20 ascq=0x00 
acpi0: AcpiEnterSleepState failed - AE_BAD_ADDRESS
wakeup from sleeping state (slept 00:00:03)
ugen0.2: <Microsoft> at usbus0 (disconnected)
ums0: at uhub0, port 2, addr 2 (disconnected)
ugen0.2: <Microsoft> at usbus0
ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0

The output of "sysctl hw.acpi":

hw.acpi.supported_sleep_state: S1 S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.cpu.cx_lowest: C1

I am using FreeBSD 8.0 and Xfce desktop environment (Thunar is the file manager). For hardware, I am using Pentium III; Compaq Deskpro EN.

I am not sure if all these information are sufficient; do let me know if you need more information. Once again, thank you very much for your help.

WY

_________________________________________________________________
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
https://signup.live.com/signup.aspx?id=60969
-------------- next part --------------
A non-text attachment was scrubbed...
Name: root-compaq.asl
Type: application/octet-stream
Size: 82366 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-acpi/attachments/20100513/febf68c0/root-compaq-0001.obj