i386/89545: Compaq DL 360 ACPI boot problem
Anders Nordby
anders at FreeBSD.org
Thu Jan 5 14:20:17 PST 2006
The following reply was made to PR i386/89545; it has been noted by GNATS.
From: Anders Nordby <anders at FreeBSD.org>
To: John Baldwin <jhb at freebsd.org>
Cc: bug-followup at freebsd.org
Subject: Re: i386/89545: Compaq DL 360 ACPI boot problem
Date: Thu, 5 Jan 2006 23:18:56 +0100
On Wed, Jan 04, 2006 at 01:13:27PM -0500, John Baldwin wrote:
>> I will check to see if I can change anything useful in the BIOS
>> tomorrow, but I doubt it. :-/
> Hmm, ok. I'd really need to know what source file:line that page fault maps
> to (you can use gdb to find that if you have a kernel.debug). OTOH, you can
> also try this patch which just prints a warning for bogus _PRT entries when
> we bump reference counts and only panics if we actually try to route an
> interrupt via the busted link device. You can try this w/o the custom DSDT.
>
> Index: acpi_pci_link.c
> ===================================================================
> RCS file: /usr/cvs/src/sys/dev/acpica/acpi_pci_link.c,v
> retrieving revision 1.51
> diff -u -r1.51 acpi_pci_link.c
> --- acpi_pci_link.c 5 Dec 2005 19:50:00 -0000 1.51
> +++ acpi_pci_link.c 4 Jan 2006 18:07:17 -0000
> @@ -625,8 +625,11 @@
> /* Bump the reference count. */
> ACPI_SERIAL_BEGIN(pci_link);
> link = acpi_pci_link_lookup(dev, index);
> - if (link == NULL)
> - panic("%s: apparently invalid index %d", __func__, index);
> + if (link == NULL) {
> + device_printf(dev, "apparently invalid index %d\n", index);
> + ACPI_SERIAL_END(pci_link);
> + return;
> + }
> link->l_references++;
> if (link->l_routed)
> pci_link_interrupt_weights[link->l_irq]++;
>
> > Fatal trap 12: page fault while in kernel mode
> > cpuid = 0; apic id = 00
> > fault virtual address = 0x1c
> > fault code = supervisor read, page not present
> > instruction pointer = 0x20:0xc0a6d69d
>
> Do a 'l *0xc0a6d69d' in 'gdb kernel.debug' if you can to see what this
> corresponds to.
Still having
http://people.freebsd.org/~anders/patches/pci_link_printf.patch-anders
and http://people.freebsd.org/~anders/patches/pci_link_serial-end.patch
applied, and with the custom DSDT running 6-STABLE as of december 30, I
rebuilt my kernel with DDB and KDB. I get this trap:
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x1c
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc0a8073d
stack pointer = 0x28:0xc0c20ba8
frame pointer = 0x28:0xc0c20bc0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
[thread pid 0 tid 0 ]
Stopped at AcpiRsGetPciRoutingTableLength+0x2d: movl
0x1c(%eax),%ecx
db> panic
panic: from debugger
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Running gdb, I get nothing I'm afraid:
root at anderstest:~# gdb /usr/obj/usr/src/sys/ANDERSTEST/kernel.debug
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you
are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for
details.
This GDB was configured as "i386-marcel-freebsd"...
(gdb) l *0xc0a8073d
No source file for address 0xc0a8073d.
Talking to you on chat, you suggested decrementing the outer package
count outside of the FAKE package. Doing this, and booting with updated
DSDT, the system boots, but without SMP (only one CPU detected):
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Thu Jan 5 20:06:32 UTC 2006
root at anderstest:/usr/obj/usr/src/sys/ANDERSTEST
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family 1133MHz (1130.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 671072256 (639 MB)
avail memory = 647356416 (617 MB)
ACPI-0377: *** Info: Table [SSDT] replaced by host OS
ACPI: overriding DSDT/SSDT with custom table
ACPI-0377: *** Info: Table [DSDT] replaced by host OS
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ MICRO> on motherboard
acpi0: Power Button (fixed)
attach started
pci_link0: calling _CRS
pci_link0: _CRS returned AE_OK
pci_link0: num_links = 0
attach started
pci_link1: calling _CRS
pci_link1: _CRS returned AE_OK
pci_link1: num_links = 1
pci_link1: 1 links initialized after child links
pci_link1: calling _CRS again
pci_link1: _CRS returned AE_OK
pci_link1: calling _PRS again
pci_link1: _PRS returned AE_OK
attach started
pci_link2: calling _CRS
pci_link2: _CRS returned AE_OK
pci_link2: num_links = 1
pci_link2: 1 links initialized after child links
pci_link2: calling _CRS again
pci_link2: _CRS returned AE_OK
pci_link2: calling _PRS again
pci_link2: _PRS returned AE_OK
attach started
pci_link3: calling _CRS
pci_link3: _CRS returned AE_OK
pci_link3: num_links = 1
pci_link3: 1 links initialized after child links
pci_link3: calling _CRS again
pci_link3: _CRS returned AE_OK
pci_link3: calling _PRS again
pci_link3: _PRS returned AE_OK
attach started
pci_link4: calling _CRS
pci_link4: _CRS returned AE_OK
pci_link4: num_links = 1
pci_link4: 1 links initialized after child links
pci_link4: calling _CRS again
pci_link4: _CRS returned AE_OK
pci_link4: calling _PRS again
pci_link4: _PRS returned AE_OK
attach started
pci_link5: calling _CRS
pci_link5: _CRS returned AE_OK
pci_link5: num_links = 1
pci_link5: 1 links initialized after child links
pci_link5: calling _CRS again
pci_link5: _CRS returned AE_OK
pci_link5: calling _PRS again
pci_link5: _PRS returned AE_OK
attach started
pci_link6: calling _CRS
pci_link6: _CRS returned AE_OK
pci_link6: num_links = 1
pci_link6: 1 links initialized after child links
pci_link6: calling _CRS again
pci_link6: _CRS returned AE_OK
pci_link6: calling _PRS again
pci_link6: _PRS returned AE_OK
attach started
pci_link7: calling _CRS
pci_link7: _CRS returned AE_OK
pci_link7: num_links = 1
pci_link7: 1 links initialized after child links
pci_link7: calling _CRS again
pci_link7: _CRS returned AE_OK
pci_link7: calling _PRS again
pci_link7: _PRS returned AE_OK
attach started
pci_link8: calling _CRS
pci_link8: _CRS returned AE_OK
pci_link8: num_links = 1
pci_link8: 1 links initialized after child links
pci_link8: calling _CRS again
pci_link8: _CRS returned AE_OK
pci_link8: calling _PRS again
pci_link8: _PRS returned AE_OK
attach started
pci_link9: calling _CRS
pci_link9: _CRS returned AE_OK
pci_link9: num_links = 1
pci_link9: 1 links initialized after child links
pci_link9: calling _CRS again
pci_link9: _CRS returned AE_OK
pci_link9: calling _PRS again
pci_link9: _PRS returned AE_OK
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci_link6: BIOS IRQ 3 for 0.1.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 0xc5000000-0xc5ffffff,0xc4000000-0xc4ffffff irq 10 at device 1.0 on pci0
ida0: [GIANT-LOCKED]
ida0: drives=1 firm_rev=1.50
idad0: <Compaq Logical Drive> on ida0
idad0: 17359MB (35553120 sectors), blocksize=512
pci0: <display, VGA> at device 3.0 (no driver attached)
pci0: <base peripheral> at device 4.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 5.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <memory> at device 5.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib2: <ACPI Host-PCI bridge> on acpi0
pci_link7: BIOS IRQ 7 for 3.5.INTA is invalid
pci3: <ACPI PCI bus> on pcib2
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem 0xc6fff000-0xc6ffffff,0xc6e00000-0xc6efffff irq 5 at device 4.0 on pci3
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:a5:e8:41:4d
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem 0xc6dff000-0xc6dfffff,0xc6c00000-0xc6cfffff irq 9 at device 5.0 on pci3
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:02:a5:e8:41:ca
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timestray irq7
counter "TSC" frequency 1130457848 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <CD-224E/9.0C> at ata1-master PIO4
Trying to mount root from ufs:/dev/idad0s1a
Loading configuration files.
kernel dumps on /dev/idad0s1b
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/idad0s1b as swap device
Starting file system checks:
/dev/idad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/idad0s1a: clean, 6576911 free (12431 frags, 820560 blocks, 0.2% fragmentation)
Setting hostname: anderstest.
fxp0: link state changed to UP
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEXf,MULTICAST> mtu x1500
options=8p<VLAN_MTU>
ine1t6 fe80::202:a5f:f:fee8:414d%fxp0 prefixlen 64 telntative scopeid i0x1
inet 192.n168.120.37 netmaksk 0xffffff00 br oadcast 192.168.s120.255
ether t00:02:a5:e8:41:4ad
media: Ethertnet 100baseTX <feull-duplex>
st atus: active
cadd net default:h gateway 192.168a.120.1
Additionnal routing optiogns:.
Starting deevd.
d to DOWN
hw.acpi.cpu.cx_lowest: C1 -> C1
Mounting NFS file systems:.
Creating and/or trimming log files:.
Starting syslogd.
Checking for core dump on /dev/idad0s1b...
savecore: no dumps found
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Starting sshd.
Initial i386 initialization:.
Additional ABI support:.
Starting cron.
Local package initialization:.
Additional TCP options:.
Starting background file system checks in 60 seconds.
Thu Jan 5 23:12:07 UTC 2006
FreeBSD/i386 (anderstest) (ttyd0)
login:
Trying your latest patch to acpi_pci_link (http://people.freebsd.org/~anders/patches/pci_link_no-panic-print-bogus-prt-entries.patch),
and disabling the custom DSDT,
the system boots. But again without SMP (only one CPU launched):
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Thu Jan 5 20:06:32 UTC 2006
root at anderstest:/usr/obj/usr/src/sys/ANDERSTEST
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family 1133MHz (1130.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 671072256 (639 MB)
avail memory = 647356416 (617 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ MICRO> on motherboard
acpi0: Power Button (fixed)
attach started
pci_link0: calling _CRS
pci_link0: _CRS returned AE_OK
pci_link0: num_links = 0
attach started
pci_link1: calling _CRS
pci_link1: _CRS returned AE_OK
pci_link1: num_links = 1
pci_link1: 1 links initialized after child links
pci_link1: calling _CRS again
pci_link1: _CRS returned AE_OK
pci_link1: calling _PRS again
pci_link1: _PRS returned AE_OK
attach started
pci_link2: calling _CRS
pci_link2: _CRS returned AE_OK
pci_link2: num_links = 1
pci_link2: 1 links initialized after child links
pci_link2: calling _CRS again
pci_link2: _CRS returned AE_OK
pci_link2: calling _PRS again
pci_link2: _PRS returned AE_OK
attach started
pci_link3: calling _CRS
pci_link3: _CRS returned AE_OK
pci_link3: num_links = 1
pci_link3: 1 links initialized after child links
pci_link3: calling _CRS again
pci_link3: _CRS returned AE_OK
pci_link3: calling _PRS again
pci_link3: _PRS returned AE_OK
attach started
pci_link4: calling _CRS
pci_link4: _CRS returned AE_OK
pci_link4: num_links = 1
pci_link4: 1 links initialized after child links
pci_link4: calling _CRS again
pci_link4: _CRS returned AE_OK
pci_link4: calling _PRS again
pci_link4: _PRS returned AE_OK
attach started
pci_link5: calling _CRS
pci_link5: _CRS returned AE_OK
pci_link5: num_links = 1
pci_link5: 1 links initialized after child links
pci_link5: calling _CRS again
pci_link5: _CRS returned AE_OK
pci_link5: calling _PRS again
pci_link5: _PRS returned AE_OK
attach started
pci_link6: calling _CRS
pci_link6: _CRS returned AE_OK
pci_link6: num_links = 1
pci_link6: 1 links initialized after child links
pci_link6: calling _CRS again
pci_link6: _CRS returned AE_OK
pci_link6: calling _PRS again
pci_link6: _PRS returned AE_OK
attach started
pci_link7: calling _CRS
pci_link7: _CRS returned AE_OK
pci_link7: num_links = 1
pci_link7: 1 links initialized after child links
pci_link7: calling _CRS again
pci_link7: _CRS returned AE_OK
pci_link7: calling _PRS again
pci_link7: _PRS returned AE_OK
attach started
pci_link8: calling _CRS
pci_link8: _CRS returned AE_OK
pci_link8: num_links = 1
pci_link8: 1 links initialized after child links
pci_link8: calling _CRS again
pci_link8: _CRS returned AE_OK
pci_link8: calling _PRS again
pci_link8: _PRS returned AE_OK
attach started
pci_link9: calling _CRS
pci_link9: _CRS returned AE_OK
pci_link9: num_links = 1
pci_link9: 1 links initialized after child links
pci_link9: calling _CRS again
pci_link9: _CRS returned AE_OK
pci_link9: calling _PRS again
pci_link9: _PRS returned AE_OK
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci_link6: BIOS IRQ 3 for 0.1.INTA is invalid
pci_link0: apparently invalid index 0
pci0: <ACPI PCI bus> on pcib0
ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 0xc5000000-0xc5ffffff,0xc4000000-0xc4ffffff irq 10 at device 1.0 on pci0
ida0: [GIANT-LOCKED]
ida0: drives=1 firm_rev=1.50
idad0: <Compaq Logical Drive> on ida0
idad0: 17359MB (35553120 sectors), blocksize=512
pci0: <display, VGA> at device 3.0 (no driver attached)
pci0: <base peripheral> at device 4.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 5.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <memory> at device 5.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib2: <ACPI Host-PCI bridge> on acpi0
pci_link7: BIOS IRQ 7 for 3.5.INTA is invalid
pci3: <ACPI PCI bus> on pcib2
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem 0xc6fff000-0xc6ffffff,0xc6e00000-0xc6efffff irq 5 at device 4.0 on pci3
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:a5:e8:41:4d
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem 0xc6dff000-0xc6dfffff,0xc6c00000-0xc6cfffff irq 9 at device 5.0 on pci3
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:02:a5:e8:41:ca
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1130457669 Hz quality 800
Timecoustray irq7
nters tick every 1.000 msec
acd0: CDROM <CD-224E/9.0C> at ata1-master PIO4
[-- itannord at localhost attached -- Thu Jan 5 22:55:37 2006]
[-- itannord at localhost detached -- Thu Jan 5 22:55:46 2006]
Trying to mount root from ufs:/dev/idad0s1a
Loading configuration files.
kernel dumps on /dev/idad0s1b
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/idad0s1b as swap device
Starting file system checks:
/dev/idad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/idad0s1a: clean, 6576928 free (12408 frags, 820565 blocks, 0.2% fragmentation)
Setting hostname: anderstest.
fxp0: link state changed to UP
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
fxp0: flags=8843<UP,BROADCASTf,RUNNING,SIMPLEXx,MULTICAST> mtu p1500
options=81<VLAN_MTU>
ine:t6 fe80::202:a5f f:fee8:414d%fxp0l prefixlen 64 teintative scopeid n0x1
inet 192.k168.120.37 netma sk 0xffffff00 brsoadcast 192.168.t120.255
ether a00:02:a5:e8:41:4td
media: Etherenet 100baseTX <f ull-duplex>
stcatus: active
hadd net default:a gateway 192.168n.120.1
Additiongal routing optioens:.
Starting ddevd.
to DOWN
hw.acpi.cpu.cx_lowest: C1 -> C1
Mounting NFS file systems:.
Creating and/or trimming log files:.
Starting syslogd.
Checking for core dump on /dev/idad0s1b...
savecore: no dumps found
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Starting sshd.
Initial i386 initialization:.
Additional ABI support:.
Starting cron.
Local package initialization:.
Additional TCP options:.
Starting background file system checks in 60 seconds.
Thu Jan 5 22:55:59 UTC 2006
FreeBSD/i386 (anderstest) (ttyd0)
login:
How can I get SMP running? This worked in 5.x and 4.x, I believe.
Regards,
--
Anders.
More information about the freebsd-acpi
mailing list