kern/88859: ACPI broken on Compaq DL360

[ravi pina]

The following reply was made to PR kern/88859; it has been noted by GNATS.

From: ravi pina <ravi at cow.org>
To: bug-followup at FreeBSD.org, tedm at ipinc.net
Cc: support at ipinc.net
Subject: Re: kern/88859: ACPI broken on Compaq DL360
Date: Tue, 3 Jan 2006 16:32:49 -0500

 follows is the transcribed output of the boot -v.  unfortunately
 i was unable to capture two sections noted by '< Missing >'.
 hopefully these blocks are not relevant to the acpi debug, however
 if they are i will attempt to find an alternate method to capture
 the screens.
 
 let me know if there is any other information you need to hopefully
 get this fixed. :)
 
 -r
 
 /boot/kernel/acpi.ko text=0x40c2c data=0x2160+0x1090 syms=[0x4+0x7810+0x4+0xa292
 ]
 SMAP type=01 base=0000000000000000 len=000000000009f800
 SMAP type=02 base=000000000009f800 len=0000000000000800
 SMAP type=02 base=00000000000f0000 len=0000000000010000
 SMAP type=01 base=0000000000100000 len=000000003fefc000
 SMAP type=03 base=000000003fffc000 len=0000000000004000
 SMAP type=02 base=00000000fec00000 len=0000000000010000
 SMAP type=02 base=00000000fee00000 len=0000000000010000
 SMAP type=02 base=00000000fff90000 len=0000000000080000
 SMAP type=01 base=0000000100000000 len=0000000000000000
 Copyright (c) 1992-2005 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD 6.0-RELEASE #0: Tue Nov  3 09:36:13 UTC 2005
     root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a89000.
 Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a89194.
 MP Configuration Table version 1.4 found at 0xc00fbeca
 Table 'PACP' at 0x3fffc040
 Table 'APIC' at 0x3fffc100
 MADT: Found table at 0x3fffc100
 APIC: Using MADT enumerator.
 MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
 MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
 MADT: Found CPU APIC ID 2 ACPI ID 2: disabled
 MADT: Found CPU APIC ID 3 ACPI ID 3: enabled
 ACIP APIC Table: <COMPAQ 00000083>
 Calibrating clock(s) ... i8254 clock: 1193117 Hz
 CLK_USE_I8254_CALIBRATION not specified - using default frequency
 Timecounter "i8254" frequency 1193182 Hz quality 0
 Calibrating TSC clock ...
 
 < Missing >
 
 CPU: Intel Pentium III (999.85-MHz 686-class CPU)
   Origin = "Genuineintel"  Id = 0x68a  Stepping = 10
   Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
 OV,PAT,PSE36,MMX,FXSR,SSE>
 real memory  = 1073725440 (1023 MB)
 avail memory = 1041829888 (993 MB)
 ioapic0 <Version 1.1> irqs 0-34 on motherboard
 
 < Missing > 
 
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00000000 err: 0x000100f0 pcm: 0x00010000
 wlan: <802.11 Link Layer>
 random: <entropy source, Software, Yarrow>
 nfslock: pseudo-device
 io: <I/O>
 mem: <memory>
 Pentium Pro MTRR support enabled
 null: <null device, zero device>
 npx0: [FAST]
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 acpi0: <COMPAQ MICRO> on motherboard
 acpi0: [MPSAFE]
 acpi0: Power Button (fixed)
 pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
 pci_open(1a):   mode1res=0x80000000 (0x80000000)
 pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=00091166)
 pcibios: BIOS version 2.10
 AcpiOsDerivePciId: bus 0 dev 0 func 0
 unknown: I/O range not supported
 AcpiOsDerivePciId: bus 0 dev 0 func 1
 pci_link0: <ACPI PCI Link FAKE> on acpi0
 pci_link1: <ACPI PCI Link INA0> on acpi0
 
 -- 
 +++ATH
 7MN; {{{