aic79xx not working 2.4.23

Jens Laas jens.laas at data.slu.se
Fri Dec 5 01:21:33 PST 2003


(03.12.04 kl.09:45) Justin T. Gibbs skrev följande till Jens Laas and...:

> > aic79xx does not work when compiled into the kernel (not as module).
> > It does not detect anything or say anything at all.
> > This is also true for 2.4.22
>
> Are you saying it works as a module?  Do you have HostRAID enabled
> in the controller BIOS?  HostRAID is not supported by the aic79xx
> driver.

I was wrong about it working as a module.
Driver does not work either way since 2.4.21. (2.6 have same problem).

HostRAID is not enabled as far as I know. No such config in scsi-bios.
The controller does not even say it supports raid (docs etc).
(SCSI controller is Adaptec AIC-7902 U320 (rev 03) according to lspci).
The motherboard has zero-channel raid controller (2010s). This is not
enabled/compiled in kernel. (No i2o).

When using modprobe is says: No devices found.

I do not use RAID in anyway on system.

The motherboard has chipset: ServerWorks Grand Champion LE.

I can send the kernel config if you want it.
I can also hack the driver if you need any info that way.

This is what is recognised in 2.4.21.

SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.0
        <Adaptec AIC7902 Ultra320 SCSI adapter>
        aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512
SCBs

scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.0
        <Adaptec AIC7902 Ultra320 SCSI adapter>
        aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512
SCBs

blk: queue f7b7e418, I/O limit 4095Mb (mask 0xffffffff)
(scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
(scsi0:A:1): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
  Vendor: SEAGATE   Model: ST336607LW        Rev: 0006
  Type:   Direct-Access                      ANSI SCSI revision: 03
blk: queue f7b7e218, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: SEAGATE   Model: ST336607LW        Rev: 0006
  Type:   Direct-Access                      ANSI SCSI revision: 03
blk: queue f7b7e018, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
scsi0:A:1:0: Tagged Queuing enabled.  Depth 32
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0

Cheers,
Jens

>
> --
> Justin
>

-----------------------------------------------------------------------
    'This mail automatically becomes portable when carried.'
-----------------------------------------------------------------------
    Jens Låås                              Email: jens.laas at data.slu.se
    Department of Computer Services, SLU   Phone: +46 18 67 35 15
    Vindbrovägen 1
    P.O. Box 7079
    S-750 07 Uppsala
    SWEDEN
-----------------------------------------------------------------------


More information about the aic7xxx mailing list