Problems with 6.2.0
John C. Toman
jctoman at compendium-tech.com
Thu Jul 19 16:01:15 PDT 2001
Justin T. Gibbs wrote:
>>I was noticing some errors on a software RAID I'm trying to put together
>>on a 29160. There are 5 Quantum 36.7GB 7200 RPM drives, and a SCSI tape
>>drive on the bus. Here's the dmesg output:
>>
>
>Your dmesg is truncated. It would be nice to see the initial controller
>and disk probe messages. Also, please recreate the problem with
>"aic7xxx=verbose" set in your LILO append line (assumes you are running
>with the driver statically linked into your kernel).
>
>--
>Justin
>
Okay, here's the full dmesg log, with verbose on. Please let me know if
you can't read the attachment!
Thanks,
John
-------------- next part --------------
536 bytes.
Scan SMP from c009f800 for 4096 bytes.
On node 0 totalpages: 196592
zone(0): 4096 pages.
zone(1): 192496 pages.
zone(2): 0 pages.
mapped APIC to ffffe000 (01cc6000)
Kernel command line: BOOT_IMAGE=linux ro root=341 BOOT_FILE=/boot/vmlinuz-2.4.6 aic7xxx=verbose
Initializing CPU#0
Detected 755.297 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1507.32 BogoMIPS
Memory: 770428k/786368k available (1355k kernel code, 15552k reserved, 522k data, 232k init, 0k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: 0183f9ff c1c3f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After vendor init, caps: 0183f9ff c1c3f9ff 00000000 00000000
CPU: After generic, caps: 0183f9ff c1c3f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c3f9ff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9e1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0686] at 00:04.0
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.4.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05a (2001-03-20) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
block: queued sectors max/low 511461kB/380389kB, 1536 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 1b) IDE UDMA66 controller on pci00:04.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD205BA, ATA DISK drive
hdb: WDC WD400BB-00AUA1, ATA DISK drive
hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 40088160 sectors (20525 MB) w/2048KiB Cache, CHS=2495/255/63, UDMA(66)
hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(66)
Partition check:
hda: hda1
hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:0d.0
ahc_pci:0:13:0: Reading SEEPROM...done.
ahc_pci:0:13:0: BIOS eeprom is present
ahc_pci:0:13:0: Secondary High byte termination Enabled
ahc_pci:0:13:0: Secondary Low byte termination Enabled
ahc_pci:0:13:0: Primary Low Byte termination Enabled
ahc_pci:0:13:0: Primary High Byte termination Enabled
ahc_pci:0:13:0: Downloading Sequencer Program... 419 instructions downloaded
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
Vendor: QUANTUM Model: ATLAS_V_36_WLS Rev: 0200
Type: Direct-Access ANSI SCSI revision: 03
Vendor: HP Model: C1537A Rev: L907
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: QUANTUM Model: ATLAS_V_36_WLS Rev: 0230
Type: Direct-Access ANSI SCSI revision: 03
Vendor: QUANTUM Model: ATLAS_V_36_WLS Rev: 0230
Type: Direct-Access ANSI SCSI revision: 03
Vendor: QUANTUM Model: ATLAS_V_36_WLS Rev: 0230
Type: Direct-Access ANSI SCSI revision: 03
Vendor: QUANTUM Model: ATLAS_V_36_WLS Rev: 0230
Type: Direct-Access ANSI SCSI revision: 03
(scsi0:A:0): 3.300MB/s transfers
scsi0:0:0:0: Tagged Queuing enabled. Depth 253
(scsi0:A:9): 3.300MB/s transfers
scsi0:0:9:0: Tagged Queuing enabled. Depth 253
(scsi0:A:10): 3.300MB/s transfers
scsi0:0:10:0: Tagged Queuing enabled. Depth 253
(scsi0:A:11): 3.300MB/s transfers
scsi0:0:11:0: Tagged Queuing enabled. Depth 253
(scsi0:A:12): 3.300MB/s transfers
scsi0:0:12:0: Tagged Queuing enabled. Depth 253
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Detected scsi disk sdb at scsi0, channel 0, id 9, lun 0
Detected scsi disk sdc at scsi0, channel 0, id 10, lun 0
Detected scsi disk sdd at scsi0, channel 0, id 11, lun 0
Detected scsi disk sde at scsi0, channel 0, id 12, lun 0
(scsi0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(scsi0:A:0:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(scsi0:A:0): 6.600MB/s transfers (16bit)
scsi0: target 0 using 16bit transfers
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
scsi0: target 0 synchronous at 80.0MHz DT, offset = 0x3f
(scsi0:A:0:0): Sending PPR bus_width 1, period 9, offset 3f, ppr_options 2
(scsi0:A:0:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
SCSI device sda: 71722776 512-byte hdwr sectors (36722 MB)
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
(scsi0:A:9:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(scsi0:A:9:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(scsi0:A:9): 6.600MB/s transfers (16bit)
scsi0: target 9 using 16bit transfers
(scsi0:A:9): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
scsi0: target 9 synchronous at 80.0MHz DT, offset = 0x3f
(scsi0:A:9:0): Sending PPR bus_width 1, period 9, offset 3f, ppr_options 2
(scsi0:A:9:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
SCSI device sdb: 71722776 512-byte hdwr sectors (36722 MB)
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 >
(scsi0:A:10:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(scsi0:A:10:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(scsi0:A:10): 6.600MB/s transfers (16bit)
scsi0: target 10 using 16bit transfers
(scsi0:A:10): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
scsi0: target 10 synchronous at 80.0MHz DT, offset = 0x3f
(scsi0:A:10:0): Sending PPR bus_width 1, period 9, offset 3f, ppr_options 2
(scsi0:A:10:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
SCSI device sdc: 71722776 512-byte hdwr sectors (36722 MB)
sdc: sdc2 sdc3 < sdc5 sdc6 sdc7 sdc8 sdc9 >
(scsi0:A:11:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(scsi0:A:11:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(scsi0:A:11): 6.600MB/s transfers (16bit)
scsi0: target 11 using 16bit transfers
(scsi0:A:11): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
scsi0: target 11 synchronous at 80.0MHz DT, offset = 0x3f
(scsi0:A:11:0): Sending PPR bus_width 1, period 9, offset 3f, ppr_options 2
(scsi0:A:11:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
SCSI device sdd: 71722776 512-byte hdwr sectors (36722 MB)
sdd: sdd2 sdd3 < sdd5 sdd6 sdd7 sdd8 sdd9 >
(scsi0:A:12:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(scsi0:A:12:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
(scsi0:A:12): 6.600MB/s transfers (16bit)
scsi0: target 12 using 16bit transfers
(scsi0:A:12): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
scsi0: target 12 synchronous at 80.0MHz DT, offset = 0x3f
(scsi0:A:12:0): Sending PPR bus_width 1, period 9, offset 3f, ppr_options 2
(scsi0:A:12:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
SCSI device sde: 71722776 512-byte hdwr sectors (36722 MB)
sde: sde2 sde3 < sde5 sde6 sde7 sde8 sde9 >
md: linear personality registered
md: raid0 personality registered
md: raid1 personality registered
md: raid5 personality registered
raid5: measuring checksumming speed
8regs : 827.600 MB/sec
32regs : 740.400 MB/sec
pII_mmx : 1755.200 MB/sec
p5_mmx : 2240.400 MB/sec
raid5: using function: p5_mmx (2240.400 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 0.9.1_beta2 by Heinz Mauelshagen (18/01/2001)
lvm -- Driver successfully initialized
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 232k freed
Adding Swap: 192772k swap-space (priority -1)
Adding Swap: 192772k swap-space (priority -2)
Adding Swap: 232900k swap-space (priority -3)
Adding Swap: 232900k swap-space (priority -4)
Adding Swap: 232900k swap-space (priority -5)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 13:32:25 Jul 19 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:04.3
PCI: Sharing IRQ 9 with 00:04.2
usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:04.2
PCI: Sharing IRQ 9 with 00:04.3
usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
(read) sda8's sb offset: 264960 [events: 0000001a]
(read) sdb8's sb offset: 264960 [events: 0000001a]
(read) sdc8's sb offset: 264960 [events: 0000001a]
(read) sdd8's sb offset: 264960 [events: 0000001a]
(read) sde8's sb offset: 264960 [events: 0000001a]
md: autorun ...
md: considering sde8 ...
md: adding sde8 ...
md: adding sdd8 ...
md: adding sdc8 ...
md: adding sdb8 ...
md: adding sda8 ...
md: created md8
md: bind<sda8,1>
md: bind<sdb8,2>
md: bind<sdc8,3>
md: bind<sdd8,4>
md: bind<sde8,5>
md: running: <sde8><sdd8><sdc8><sdb8><sda8>
md: now!
md: sde8's event counter: 0000001a
md: sdd8's event counter: 0000001a
md: sdc8's event counter: 0000001a
md: sdb8's event counter: 0000001a
md: sda8's event counter: 0000001a
md8: max total readahead window set to 992k
md8: 4 data-disks, max readahead per data-disk: 248k
raid5: device sde8 operational as raid disk 4
raid5: device sdd8 operational as raid disk 3
raid5: device sdc8 operational as raid disk 2
raid5: device sdb8 operational as raid disk 1
raid5: device sda8 operational as raid disk 0
raid5: allocated 5387kB for md8
raid5: raid level 5 set md8 active with 5 out of 5 devices, algorithm 0
RAID5 conf printout:
--- rd:5 wd:5 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda8
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb8
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:sdc8
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sdd8
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde8
RAID5 conf printout:
--- rd:5 wd:5 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda8
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb8
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:sdc8
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sdd8
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde8
md: updating md8 RAID superblock on device
md: sde8 [events: 0000001b](write) sde8's sb offset: 264960
md: sdd8 [events: 0000001b](write) sdd8's sb offset: 264960
md: sdc8 [events: 0000001b](write) sdc8's sb offset: 264960
md: sdb8 [events: 0000001b](write) sdb8's sb offset: 264960
md: sda8 [events: 0000001b](write) sda8's sb offset: 264960
md: ... autorun DONE.
(read) sda9's sb offset: 31680064 [events: 00000006]
(read) sdb9's sb offset: 31680064 [events: 00000004]
(read) sdc9's sb offset: 31680064 [events: 00000006]
(read) sdd9's sb offset: 31680064 [events: 00000006]
(read) sde9's sb offset: 31680064 [events: 00000006]
md: autorun ...
md: considering sde9 ...
md: adding sde9 ...
md: adding sdd9 ...
md: adding sdc9 ...
md: adding sdb9 ...
md: adding sda9 ...
md: created md9
md: bind<sda9,1>
md: bind<sdb9,2>
md: bind<sdc9,3>
md: bind<sdd9,4>
md: bind<sde9,5>
md: running: <sde9><sdd9><sdc9><sdb9><sda9>
md: now!
md: sde9's event counter: 00000006
md: sdd9's event counter: 00000006
md: sdc9's event counter: 00000006
md: sdb9's event counter: 00000004
md: sda9's event counter: 00000006
md: superblock update time inconsistency -- using the most recent one
md: freshest: sde9
md: kicking non-fresh sdb9 from array!
md: unbind<sdb9,4>
md: export_rdev(sdb9)
md9: removing former faulty sdb9!
md9: max total readahead window set to 992k
md9: 4 data-disks, max readahead per data-disk: 248k
raid5: device sde9 operational as raid disk 4
raid5: device sdd9 operational as raid disk 3
raid5: device sdc9 operational as raid disk 2
raid5: device sda9 operational as raid disk 0
raid5: md9, not all disks are operational -- trying to recover array
raid5: allocated 5387kB for md9
raid5: raid level 5 set md9 active with 4 out of 5 devices, algorithm 0
RAID5 conf printout:
--- rd:5 wd:4 fd:1
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda9
disk 1, s:0, o:0, n:1 rd:1 us:1 dev:[dev 00:00]
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:sdc9
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sdd9
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde9
RAID5 conf printout:
--- rd:5 wd:4 fd:1
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda9
disk 1, s:0, o:0, n:1 rd:1 us:1 dev:[dev 00:00]
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:sdc9
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sdd9
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde9
md: updating md9 RAID superblock on device
md: sde9 [events: 00000007](write) sde9's sb offset: 31680064
md: recovery thread got woken up ...
md9: no spare disk to reconstruct array! -- continuing in degraded mode
md: recovery thread finished ...
md: sdd9 [events: 00000007](write) sdd9's sb offset: 31680064
md: sdc9 [events: 00000007](write) sdc9's sb offset: 31680064
md: sda9 [events: 00000007](write) sda9's sb offset: 31680064
md: ... autorun DONE.
Detected scsi tape st0 at scsi0, channel 0, id 3, lun 0
st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16.
PCI: Found IRQ 5 for device 00:0e.0
3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:0e.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xc000, 00:50:da:b9:b8:07, IRQ 5
product code 5842 rev 00.12 date 11-30-99
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 786d.
Enabling bus-master transmits and whole-frame receives.
00:0e.0: scatter/gather disabled. h/w checksums enabled
eth0: using NWAY device table, not 8
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
Use of setserial/setrocket to set SPD_* flags is deprecated
md: interrupting MD-thread pid 150
md: marking sb clean...
md: updating md9 RAID superblock on device
md: sde9 [events: 00000008](write) sde9's sb offset: 31680064
md: sdd9 [events: 00000008](write) sdd9's sb offset: 31680064
md: sdc9 [events: 00000008](write) sdc9's sb offset: 31680064
md: sda9 [events: 00000008](write) sda9's sb offset: 31680064
md: md9 stopped.
md: unbind<sde9,3>
md: export_rdev(sde9)
md: unbind<sdd9,2>
md: export_rdev(sdd9)
md: unbind<sdc9,1>
md: export_rdev(sdc9)
md: unbind<sda9,0>
md: export_rdev(sda9)
md: bind<sda9,1>
md: bind<sdb9,2>
md: bind<sdc9,3>
md: bind<sdd9,4>
md: bind<sde9,5>
md: sde9's event counter: 00000000
md: sdd9's event counter: 00000000
md: sdc9's event counter: 00000000
md: sdb9's event counter: 00000000
md: sda9's event counter: 00000000
md: md9: raid array is not clean -- starting background reconstruction
md9: max total readahead window set to 992k
md9: 4 data-disks, max readahead per data-disk: 248k
raid5: device sde9 operational as raid disk 4
raid5: device sdd9 operational as raid disk 3
raid5: device sdc9 operational as raid disk 2
raid5: device sdb9 operational as raid disk 1
raid5: device sda9 operational as raid disk 0
raid5: allocated 5387kB for md9
raid5: raid level 5 set md9 active with 5 out of 5 devices, algorithm 0
raid5: raid set md9 not clean; reconstructing parity
RAID5 conf printout:
--- rd:5 wd:5 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda9
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb9
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:sdc9
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sdd9
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde9
RAID5 conf printout:
--- rd:5 wd:5 fd:0
disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sda9
disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdb9
disk 2, s:0, o:1, n:2 rd:2 us:1 dev:sdc9
disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sdd9
disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sde9
md: updating md9 RAID superblock on device
md: sde9 [events: 00000001](write) sde9's sb offset: 31680064
md: syncing RAID array md9
md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc.
md: using maximum available idle IO bandwith (but not more than 100000 KB/sec) for reconstruction.
md: using 124k window, over a total of 31680064 blocks.
md: sdd9 [events: 00000001](write) sdd9's sb offset: 31680064
md: sdc9 [events: 00000001](write) sdc9's sb offset: 31680064
md: sdb9 [events: 00000001](write) sdb9's sb offset: 31680064
md: sda9 [events: 00000001](write) sda9's sb offset: 31680064
(scsi0:A:12:0): Locking max tag count at 64
(scsi0:A:9:0): Locking max tag count at 64
scsi0:0:0:0: Attempting to queue an ABORT message
scsi0: Dumping Card State in Data-out phase, at SEQADDR 0x8d
SCSISEQ = 0x5a, SBLKCTL = 0xa
DFCNTRL = 0x2c, DFSTATUS = 0x88
LASTPHASE = 0x0, SCSISIGI = 0x4, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x8d, 0x175, 0x160, 0x0
SCB count = 255
Kernel NEXTQSCB = 122
Card NEXTQSCB = 220
QINFIFO entries: 220 225 29 53 133 69 102 25 103 188 205 6 87 145 173 11 247 74 151 241 245 246 249 243 108 194 22 56 13 168 83 88 79 158 0 253 112 177 55 179 250 93 150 232 81 113 60 110 97 123
Waiting Queue entries: 27:208
Disconnected Queue entries: 3:210 29:104 15:95 19:254 24:124 20:190 11:76 0:18 22:219 10:16 31:228 5:8 25:213 23:26 13:38 2:214 30:172 16:64 1:77 9:120 14:185
QOUTFIFO entries:
Sequencer Free SCB List: 17 4 8 26 28 6 7 21 18
Pending list: 123 97 110 60 113 81 232 150 93 250 179 55 177 112 253 0 158 79 88 83 168 13 56 22 194 108 243 249 246 245 241 151 74 247 11 173 145 87 6 205 188 103 25 102 69 133 53 29 225 220 208 210 104 95 254 124 190 76 18 219 16 228 8 213 38 214 186 172 64 26 77 48 120 185 187 195
Kernel Free SCB list: 106 40 59 66 144 54 12 62 239 119 94 251 240 46 202 199 127 90 61 139 197 215 101 121 98 57 223 43 137 200 33 244 222 218 92 70 65 50 2 78 126 67 148 233 63 226 162 128 146 147 72 131 141 28 129 116 164 184 32 152 86 85 169 34 44 114 170 155 248 192 73 156 96 143 42 193 189 180 19 201 235 198 20 21 178 224 153 39 109 82 17 15 132 68 30 203 99 100 75 207 23 238 14 89 175 4 138 84 136 161 181 196 204 212 160 1 9 163 58 91 5 115 45 134 237 221 80 206 41 216 149 217 31 36 157 231 191 234 229 176 154 166 111 10 52 118 35 211 209 24 51 242 182 142 227 37 47 165 7 125 71 27 140 130 236 167 135 230 117 174 159 171 105 183 49 3 107 252
DevQ(0:0:0): 0 waiting
DevQ(0:3:0): 0 waiting
DevQ(0:9:0): 0 waiting
DevQ(0:10:0): 0 waiting
DevQ(0:11:0): 0 waiting
DevQ(0:12:0): 32 waiting
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 8194
scsi0:0:0:0: Attempting to queue an ABORT message
scsi0: Dumping Card State in Data-out phase, at SEQADDR 0x1a3
SCSISEQ = 0x1a, SBLKCTL = 0xa
DFCNTRL = 0x2c, DFSTATUS = 0x88
LASTPHASE = 0x0, SCSISIGI = 0x4, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x0, 0x8d
SCB count = 255
Kernel NEXTQSCB = 208
Card NEXTQSCB = 122
QINFIFO entries: 122 225 29 53 133 69 102 25 103 188 205 6 87 145 173 11 247 74 151 241 245 246 249 243 108 194 22 56 13 168 83 88 79 158 0 253 112 55 179 250 93 150 232 81 113 60 110 97 123 220
Waiting Queue entries:
Disconnected Queue entries: 3:210 29:104 15:95 19:254 24:124 20:190 11:76 0:18 22:219 10:16 31:228 5:8 25:213 23:26 13:38 2:214 30:172 16:64 1:77 9:120 14:185
QOUTFIFO entries:
Sequencer Free SCB List: 27 17 4 8 26 28 6 7 21 18
Pending list: 220 123 97 110 60 113 81 232 150 93 250 179 55 112 253 0 158 79 88 83 168 13 56 22 194 108 243 249 246 245 241 151 74 247 11 173 145 87 6 205 188 103 25 102 69 133 53 29 225 122 210 104 95 254 124 190 76 18 219 16 228 8 213 38 214 186 172 64 26 77 48 120 185 187 195
Kernel Free SCB list: 177 106 40 59 66 144 54 12 62 239 119 94 251 240 46 202 199 127 90 61 139 197 215 101 121 98 57 223 43 137 200 33 244 222 218 92 70 65 50 2 78 126 67 148 233 63 226 162 128 146 147 72 131 141 28 129 116 164 184 32 152 86 85 169 34 44 114 170 155 248 192 73 156 96 143 42 193 189 180 19 201 235 198 20 21 178 224 153 39 109 82 17 15 132 68 30 203 99 100 75 207 23 238 14 89 175 4 138 84 136 161 181 196 204 212 160 1 9 163 58 91 5 115 45 134 237 221 80 206 41 216 149 217 31 36 157 231 191 234 229 176 154 166 111 10 52 118 35 211 209 24 51 242 182 142 227 37 47 165 7 125 71 27 140 130 236 167 135 230 117 174 159 171 105 183 49 3 107 252
DevQ(0:0:0): 0 waiting
DevQ(0:3:0): 0 waiting
DevQ(0:9:0): 0 waiting
DevQ(0:10:0): 0 waiting
DevQ(0:11:0): 0 waiting
DevQ(0:12:0): 32 waiting
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 8194
scsi0:0:0:0: Attempting to queue an ABORT message
scsi0:0:0:0: Command not found
aic7xxx_abort returns 8194
scsi0:0:0:0: Attempting to queue an ABORT message
scsi0: Dumping Card State in Data-out phase, at SEQADDR 0x53
SCSISEQ = 0x1a, SBLKCTL = 0xa
DFCNTRL = 0x2c, DFSTATUS = 0x88
LASTPHASE = 0x0, SCSISIGI = 0x4, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x0, 0x8d
SCB count = 255
Kernel NEXTQSCB = 220
Card NEXTQSCB = 208
QINFIFO entries: 208 225 29 53 133 69 102 25 103 188 205 6 87 145 173 11 247 74 151 241 245 246 249 243 108 194 22 56 13 168 83 88 79 158 0 253 112 55 179 250 93 150 232 81 113 60 110 97 123 122
Waiting Queue entries:
Disconnected Queue entries: 3:210 29:104 15:95 19:254 24:124 20:190 11:76 0:18 22:219 10:16 31:228 5:8 25:213 23:26 13:38 2:214 30:172 16:64 1:77 9:120 14:185
QOUTFIFO entries:
Sequencer Free SCB List: 27 17 4 8 26 28 6 7 21 18
Pending list: 122 123 97 110 60 113 81 232 150 93 250 179 55 112 253 0 158 79 88 83 168 13 56 22 194 108 243 249 246 245 241 151 74 247 11 173 145 87 6 205 188 103 25 102 69 133 53 29 225 208 210 104 95 254 124 190 76 18 219 16 228 8 213 38 214 186 172 64 26 77 48 120 185 187 195
Kernel Free SCB list: 177 106 40 59 66 144 54 12 62 239 119 94 251 240 46 202 199 127 90 61 139 197 215 101 121 98 57 223 43 137 200 33 244 222 218 92 70 65 50 2 78 126 67 148 233 63 226 162 128 146 147 72 131 141 28 129 116 164 184 32 152 86 85 169 34 44 114 170 155 248 192 73 156 96 143 42 193 189 180 19 201 235 198 20 21 178 224 153 39 109 82 17 15 132 68 30 203 99 100 75 207 23 238 14 89 175 4 138 84 136 161 181 196 204 212 160 1 9 163 58 91 5 115 45 134 237 221 80 206 41 216 149 217 31 36 157 231 191 234 229 176 154 166 111 10 52 118 35 211 209 24 51 242 182 142 227 37 47 165 7 125 71 27 140 130 236 167 135 230 117 174 159 171 105 183 49 3 107 252
DevQ(0:0:0): 0 waiting
DevQ(0:3:0): 0 waiting
DevQ(0:9:0): 0 waiting
DevQ(0:10:0): 0 waiting
DevQ(0:11:0): 0 waiting
DevQ(0:12:0): 32 waiting
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 8194
scsi0:0:0:0: Attempting to queue an ABORT message
scsi0: Dumping Card State in Data-out phase, at SEQADDR 0x1a3
SCSISEQ = 0x1a, SBLKCTL = 0xa
DFCNTRL = 0x2c, DFSTATUS = 0x88
LASTPHASE = 0x0, SCSISIGI = 0x4, SXFRCTL0 = 0x80
SSTAT0 = 0x0, SSTAT1 = 0x0
SCSIPHASE = 0x0
STACK == 0x175, 0x160, 0x0, 0x8d
SCB count = 255
Kernel NEXTQSCB = 208
Card NEXTQSCB = 220
QINFIFO entries: 220 225 29 53 133 69 102 25 103 188 205 6 87 145 173 11 247 74 151 241 245 246 249 243 108 194 22 56 13 168 83 88 79 158 0 253 112 55 179 250 93 150 232 81 113 60 110 97 123
Waiting Queue entries:
Disconnected Queue entries: 3:210 29:104 15:95 19:254 24:124 20:190 11:76 0:18 22:219 10:16 31:228 5:8 25:213 23:26 13:38 2:214 30:172 16:64 1:77 9:120 14:185
QOUTFIFO entries:
Sequencer Free SCB List: 27 17 4 8 26 28 6 7 21 18
Pending list: 123 97 110 60 113 81 232 150 93 250 179 55 112 253 0 158 79 88 83 168 13 56 22 194 108 243 249 246 245 241 151 74 247 11 173 145 87 6 205 188 103 25 102 69 133 53 29 225 220 210 104 95 254 124 190 76 18 219 16 228 8 213 38 214 186 172 64 26 77 48 120 185 187 195
Kernel Free SCB list: 122 177 106 40 59 66 144 54 12 62 239 119 94 251 240 46 202 199 127 90 61 139 197 215 101 121 98 57 223 43 137 200 33 244 222 218 92 70 65 50 2 78 126 67 148 233 63 226 162 128 146 147 72 131 141 28 129 116 164 184 32 152 86 85 169 34 44 114 170 155 248 192 73 156 96 143 42 193 189 180 19 201 235 198 20 21 178 224 153 39 109 82 17 15 132 68 30 203 99 100 75 207 23 238 14 89 175 4 138 84 136 161 181 196 204 212 160 1 9 163 58 91 5 115 45 134 237 221 80 206 41 216 149 217 31 36 157 231 191 234 229 176 154 166 111 10 52 118 35 211 209 24 51 242 182 142 227 37 47 165 7 125 71 27 140 130 236 167 135 230 117 174 159 171 105 183 49 3 107 252
DevQ(0:0:0): 0 waiting
DevQ(0:3:0): 0 waiting
DevQ(0:9:0): 0 waiting
DevQ(0:10:0): 0 waiting
DevQ(0:11:0): 0 waiting
DevQ(0:12:0): 32 waiting
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 8194
More information about the aic7xxx
mailing list