AHA-2940AU BIOS 1.21 with Linux 2.0.31
daniele giacomini
daniele at calion.com
Mon Oct 20 11:02:01 PDT 1997
Hi everybody.
I tryed to read what I was able to find on the Net, but it seems to me
that my problem is new.
I use IDE disks with a removable media connetted to the AHA-2940AU board.
It used to work with Linux kernels 2.0.30 and 2.1.40.
I tryed also other experimental kernel (2.1.53, 2.1.57) and now the new
2.0.31, but with them, it doesn't get recognised at boot time.
I enclose the information I can find inside /proc/... when I use the
kernel 2.0.30.
I will appreciate any information.
saluti/regards/gruesse,
daniele giacomini - Treviso, Italy
-----------
Adaptec AIC7xxx driver version: 4.0/3.2/4.0
Compile Options:
AIC7XXX_RESET_DELAY : 15
AIC7XXX_TWIN_SUPPORT : Enabled
AIC7XXX_TAGGED_QUEUEING: Disabled
AIC7XXX_PAGE_ENABLE : Disabled
AIC7XXX_PROC_STATS : Disabled
Adapter Configuration:
SCSI Adapter: AHA-2940A Ultra
(AIC-785x chipset)
Host Bus: Single
Base IO: 0x6000
IRQ: 12
SCBs: Used 2, HW 3, Page 3
Interrupts: 2062
Serial EEPROM: True
Extended Translation: Disabled
SCSI Bus Reset: Enabled
Ultra SCSI: Disabled
Target Disconnect: Disabled
More information about the aic7xxx
mailing list