Re: rtw88 import to main
- Reply: Bjoern A. Zeeb: "Re: rtw88 import to main"
- Reply: Daniel_Pérez: "Re: rtw88 import to main"
- In reply to: Bjoern A. Zeeb: "Re: rtw88 import to main"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Fri, 01 Apr 2022 13:39:13 UTC
Thank you for the hint. Kernel built without an issue.
As expected, part of the firmware fails to load without the physmem hint (7200MB). I tried to boot with physmem set to 4G, firmware loaded and I could attach rtw880 to a new wlan device.
Following are full logs, first with original memory (7200MB) and lastly with physmem (4G):
pciconf:
rtw880@pci0:3:0:0:class=0x028000 rev=0x00 hdr=0x00 vendor=0x10ec
device=0xc822 subvendor=0x103c subdevice=0x85f7
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8822CE 802.11ac PCIe Wireless Network Adapter'
class = network
dmesg ORIGINAL:
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-STABLE #1 stable/13-n249237-d055313f8c6: Mon Feb 28 20:32:52 CET 2022
root@zerserk:/usr/obj/usr/src/amd64.amd64/sys/STEEW amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(efifb): resolution 1920x1080
CPU: AMD Ryzen 5 4600H with Radeon Graphics (2994.51-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr,RDPRU,MCOMMIT,WBNOINVD,IBPB,IBRS,STIBP,PREFER_IBRS,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 7604330496 (7252 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 87B1 >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 10 1 7 9 6 8 4 5 11 2 3
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <HPQOEM SLIC-MPC>
Firmware Error (ACPI): Failure creating named object [\134SMIB], AE_ALREADY_EXISTS (20201113/dsfield-820)
ACPI Warning: NsLookup: Type mismatch on SMIB (Integer), searching for (RegionField) (20201113/nsaccess-869)
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP1.WLAN], AE_NOT_FOUND (20201113/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20201113/psobject-372)
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff at device 0.0 on pci1
hdac0: <NVIDIA (0x10fa) HDA Controller> mem 0xfc080000-0xfc083fff at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfc904000-0xfc904fff,0xfc900000-0xfc903fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: b0:5c:da:42:2f:e2
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci4: <ACPI PCI bus> on pcib4
nvme0: <Generic NVMe Device> mem 0xfc700000-0xfc703fff at device 0.0 on pci4
pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci1: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfc500000-0xfc57ffff at device 0.0 on pci5
pci5: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc300000-0xfc3fffff at device 0.3 on pci5
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff at device 0.4 on pci5
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pci5: <multimedia> at device 0.5 (no driver attached)
hdac1: <AMD Raven HDA Controller> mem 0xfc5c0000-0xfc5c7fff at device 0.6 on pci5
pcib6: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci6: <ACPI PCI bus> on pcib6
ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfc601000-0xfc6017ff at device 0.0 on pci6
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc600000-0xfc6007ff at device 0.1 on pci6
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich1: <AHCI channel> at channel 0 on ahci1
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
acpi_tz0: _CRT value is absurd, ignored (255.1C)
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC-low" frequency 1497187698 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <NVIDIA (0x0094) HDA CODEC> at cad 0 on hdac0
ugen1.1: <0x1022 XHCI root HUB> at usbus1
hdaa0: <NVIDIA (0x0094) Audio Function Group> at nid 1 on hdacc0
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
acpi_tz0: _CRT value is absurd, ignored (255.1C)
pcm0: <NVIDIA (0x0094) (HDMI/DP 8ch)> at nid 4 on hdaa0
uhub0 on usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvme0: Allocated 61MB host memory buffer
nvd0: <KBG40ZNV512G KIOXIA> NVMe namespace
nvd0: 488386MB (1000215216 512 byte sectors)
hdacc1: <Realtek ALC285 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc1
GEOM_ELI: Device nvd0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
pcm1: <Realtek ALC285 (Analog)> at nid 20 and 18 on hdaa1
pcm2: <Realtek ALC285 (Right Analog)> at nid 33 and 25 on hdaa1
Trying to mount root from zfs:zroot/ROOT/13.0-STABLE-20220206.083317 []...
uhub0: 6 ports with 6 removable, self powered
uhub1: 6 ports with 6 removable, self powered
[drm] amdgpu kernel modesetting enabled.
drmn1: <drmn> on vgapci1
vgapci1: child drmn1 requested pci_enable_io
vgapci1: child drmn1 requested pci_enable_io
[drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x103C:0x87B1 0xC7).
[drm] register mmio base: 0xFC500000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <smu>
[drm] add ip block number 5 <gfx_v9_0>
[drm] add ip block number 6 <sdma_v4_0>
[drm] add ip block number 7 <dm>
[drm] add ip block number 8 <vcn_v2_0>
[drm] add ip block number 9 <jpeg_v2_0>
drmn1: successfully loaded firmware image 'amdgpu/renoir_gpu_info.bin'
ATOM BIOS: 113-RENOIR-025
drmn1: successfully loaded firmware image 'amdgpu/renoir_sdma.bin'
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
drmn1: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
drmn1: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
drmn1: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=512M, BAR=512M
[drm] RAM width 128bits DDR4
[TTM] Zone kernel: Available graphics memory: 3844180 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
drmn1: successfully loaded firmware image 'amdgpu/renoir_asd.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_pfp.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_me.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_ce.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_rlc.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_mec.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_mec2.bin'
[drm] use_doorbell being set to: [true]
drmn1: successfully loaded firmware image 'amdgpu/renoir_dmcub.bin'
[drm] Loading DMUB firmware via PSP: version=0x00000000
drmn1: successfully loaded firmware image 'amdgpu/renoir_vcn.bin'
[drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 17
[drm] PSP loading VCN firmware
sos fw version = 0x110043.
[drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
ugen1.2: <SunplusIT Inc HP TrueVision HD Camera> at usbus1
ugen0.2: <vendor 0x093a USB OPTICAL MOUSE> at usbus0
smu driver if version = 0x0000000b, smu fw if version = 0x0000000e, smu fw version = 0x00373800 (55.56.0)
SMU driver if version not matched
SMU is initialized successfully!
[drm] kiq ring mec 2 pipe 1 q 0
[drm] Display Core initialized with v3.2.76!
[drm] DMUB hardware initialized: version=0x01020003
[drm] Connector eDP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.eDP-1
[drm] - kern.vt.fb.default_mode
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
[drm] fb mappable at 0x230C8D000
[drm] vram apper at 0x230000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
pbase=0x230c8d000 vbase=0xfffffe00c928d000
name=drmn1 flags=0x0 stride=7680 bpp=32
end FB_INFO
drmn1: ring gfx uses VM inv eng 0 on hub 0
drmn1: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn1: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn1: ring comp_1.2.0 uses VM inv eng 5 on hub 0
drmn1: ring comp_1.3.0 uses VM inv eng 6 on hub 0
drmn1: ring comp_1.0.1 uses VM inv eng 7 on hub 0
drmn1: ring comp_1.1.1 uses VM inv eng 8 on hub 0
drmn1: ring comp_1.2.1 uses VM inv eng 9 on hub 0
drmn1: ring comp_1.3.1 uses VM inv eng 10 on hub 0
drmn1: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
drmn1: ring sdma0 uses VM inv eng 0 on hub 1
drmn1: ring vcn_dec uses VM inv eng 1 on hub 1
drmn1: ring vcn_enc0 uses VM inv eng 4 on hub 1
drmn1: ring vcn_enc1 uses VM inv eng 5 on hub 1
drmn1: ring jpeg_dec uses VM inv eng 6 on hub 1
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] Initialized amdgpu 3.37.0 20150101 for drmn1 on minor 0
amdsmn0: <AMD Family 17h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
driver bug: Unable to set devclass (class: ppc devname: (unknown))
ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
iicbus0: <unknown card> at addr 0x15
acpi_video1: <ACPI video extension> on vgapci1
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
acpi_hp0: HP event GUID detected, installing event handler
acpi_hp0: HP CMI GUID detected
nvidia0: <Unknown> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.47.03 Mon Jan 24 22:33:26 UTC 2022
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
iichid0: <ELAN0718:01 04F3:30FD I2C HID device> at addr 0x15 on iicbus0
iichid0: Interrupt setup failed. Fallback to sampling
hidbus0: <HID bus> on iichid0
ugen0.3: <Realtek Bluetooth Radio> at usbus0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
ums0 on uhub1
ums0: <vendor 0x093a USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=0
hms0: <ELAN0718:01 04F3:30FD Mouse> on hidbus0
hms0: 2 buttons and [XY] coordinates ID=1
hmt0: <ELAN0718:01 04F3:30FD TouchPad> on hidbus0
hconf0: <ELAN0718:01 04F3:30FD Configuration> on hidbus0
hmt0: Multitouch touchpad with 0 external buttons, click-pad
hmt0: 5 contacts with [C] properties. Report range [0:0] - [3520:1784]
ubt0 on uhub1
ubt0: <Bluetooth Radio> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
Security policy loaded: MAC/ntpd (mac_ntpd)
ACPI Warning: \134_SB.PCI0.GPP0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20201113/nsarguments-212)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 0 done
All buffers synced.
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-STABLE #2 stable/13-n250197-91d751f798d: Fri Apr 1 14:38:19 CEST 2022
root@zerserk:/usr/obj/usr/src/amd64.amd64/sys/STEEW amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(efifb): resolution 1920x1080
CPU: AMD Ryzen 5 4600H with Radeon Graphics (2994.47-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr,RDPRU,MCOMMIT,WBNOINVD,IBPB,IBRS,STIBP,PREFER_IBRS,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 7591792640 (7240 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 87B1 >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 8 3 9 1 4 5 11 10 7 6 2
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <HPQOEM SLIC-MPC>
Firmware Error (ACPI): Failure creating named object [\134SMIB], AE_ALREADY_EXISTS (20201113/dsfield-820)
ACPI Warning: NsLookup: Type mismatch on SMIB (Integer), searching for (RegionField) (20201113/nsaccess-869)
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP1.WLAN], AE_NOT_FOUND (20201113/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20201113/psobject-372)
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
amdsmn0: <AMD Family 17h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff at device 0.0 on pci1
hdac0: <NVIDIA (0x10fa) HDA Controller> mem 0xfc080000-0xfc083fff at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfc904000-0xfc904fff,0xfc900000-0xfc903fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: b0:5c:da:42:2f:e2
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci4: <ACPI PCI bus> on pcib4
nvme0: <Generic NVMe Device> mem 0xfc700000-0xfc703fff at device 0.0 on pci4
pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci1: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfc500000-0xfc57ffff at device 0.0 on pci5
pci5: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc300000-0xfc3fffff at device 0.3 on pci5
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff at device 0.4 on pci5
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pci5: <multimedia> at device 0.5 (no driver attached)
hdac1: <AMD Raven HDA Controller> mem 0xfc5c0000-0xfc5c7fff at device 0.6 on pci5
pcib6: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci6: <ACPI PCI bus> on pcib6
ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfc601000-0xfc6017ff at device 0.0 on pci6
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc600000-0xfc6007ff at device 0.1 on pci6
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich1: <AHCI channel> at channel 0 on ahci1
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
acpi_tz0: _CRT value is absurd, ignored (255.1C)
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <NVIDIA (0x0094) HDA CODEC> at cad 0 on hdac0
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
hdaa0: <NVIDIA (0x0094) Audio Function Group> at nid 1 on hdacc0
acpi_tz0: _CRT value is absurd, ignored (255.1C)
pcm0: <NVIDIA (0x0094) (HDMI/DP 8ch)> at nid 4 on hdaa0
ugen1.1: <AMD XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <AMD XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvme0: Allocated 61MB host memory buffer
nvd0: <KBG40ZNV512G KIOXIA> NVMe namespace
nvd0: 488386MB (1000215216 512 byte sectors)
hdacc1: <Realtek ALC285 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc1
GEOM_ELI: Device nvd0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
pcm1: <Realtek ALC285 (Analog)> at nid 20 and 18 on hdaa1
pcm2: <Realtek ALC285 (Right Analog)> at nid 33 and 25 on hdaa1
Trying to mount root from zfs:zroot/ROOT/13.0-STABLE-20220206.083317 []...
uhub0: 6 ports with 6 removable, self powered
uhub1: 6 ports with 6 removable, self powered
[drm] amdgpu kernel modesetting enabled.
driver bug: Unable to set devclass (class: ppc devname: (unknown))
ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
ugen1.2: <SunplusIT Inc HP TrueVision HD Camera> at usbus1
iicbus0: <unknown card> at addr 0x15
acpi_video1: <ACPI video extension> on vgapci1
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
acpi_hp0: HP event GUID detected, installing event handler
acpi_hp0: HP CMI GUID detected
ugen0.2: <vendor 0x093a USB OPTICAL MOUSE> at usbus0
nvidia0: <Unknown> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.47.03 Mon Jan 24 22:33:26 UTC 2022
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
rtw880: <rtw_8822ce> port 0xd000-0xd0ff mem 0xfc800000-0xfc80ffff at device 0.0 on pci3
rtw880: successfully loaded firmware image 'rtw88/rtw8822c_fw.bin'
rtw880: Firmware version 9.9.11, H2C version 15
iichid0: <ELAN0718:01 04F3:30FD I2C HID device> at addr 0x15 on iicbus0
iichid0: Interrupt setup failed. Fallback to sampling
hidbus0: <HID bus> on iichid0
lo0: link state changed to UP
re0: link state changed to DOWN
ugen0.3: <Realtek Bluetooth Radio> at usbus0
re0: link state changed to UP
ums0 on uhub1
ums0: <vendor 0x093a USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=0
hms0: <ELAN0718:01 04F3:30FD Mouse> on hidbus0
hms0: 2 buttons and [XY] coordinates ID=1
hmt0: <ELAN0718:01 04F3:30FD TouchPad> on hidbus0
hconf0: <ELAN0718:01 04F3:30FD Configuration> on hidbus0
hmt0: Multitouch touchpad with 0 external buttons, click-pad
hmt0: 5 contacts with [C] properties. Report range [0:0] - [3520:1784]
ubt0 on uhub1
ubt0: <Bluetooth Radio> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
Security policy loaded: MAC/ntpd (mac_ntpd)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 0 done
All buffers synced.
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-STABLE #2 stable/13-n250197-91d751f798d: Fri Apr 1 14:38:19 CEST 2022
root@zerserk:/usr/obj/usr/src/amd64.amd64/sys/STEEW amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(efifb): resolution 1920x1080
CPU: AMD Ryzen 5 4600H with Radeon Graphics (2994.52-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr,RDPRU,MCOMMIT,WBNOINVD,IBPB,IBRS,STIBP,PREFER_IBRS,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 7591788544 (7240 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 87B1 >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 7 1 9 8 6 5 4 11 10 2 3
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <HPQOEM SLIC-MPC>
Firmware Error (ACPI): Failure creating named object [\134SMIB], AE_ALREADY_EXISTS (20201113/dsfield-820)
ACPI Warning: NsLookup: Type mismatch on SMIB (Integer), searching for (RegionField) (20201113/nsaccess-869)
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP1.WLAN], AE_NOT_FOUND (20201113/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20201113/psobject-372)
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
amdsmn0: <AMD Family 17h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff at device 0.0 on pci1
hdac0: <NVIDIA (0x10fa) HDA Controller> mem 0xfc080000-0xfc083fff at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfc904000-0xfc904fff,0xfc900000-0xfc903fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: b0:5c:da:42:2f:e2
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci4: <ACPI PCI bus> on pcib4
nvme0: <Generic NVMe Device> mem 0xfc700000-0xfc703fff at device 0.0 on pci4
pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci1: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfc500000-0xfc57ffff at device 0.0 on pci5
pci5: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc300000-0xfc3fffff at device 0.3 on pci5
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff at device 0.4 on pci5
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pci5: <multimedia> at device 0.5 (no driver attached)
hdac1: <AMD Raven HDA Controller> mem 0xfc5c0000-0xfc5c7fff at device 0.6 on pci5
pcib6: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci6: <ACPI PCI bus> on pcib6
ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfc601000-0xfc6017ff at device 0.0 on pci6
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc600000-0xfc6007ff at device 0.1 on pci6
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich1: <AHCI channel> at channel 0 on ahci1
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
acpi_tz0: _CRT value is absurd, ignored (255.1C)
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
acpi_tz0: _CRT value is absurd, ignored (255.1C)
hdacc0: <NVIDIA (0x0094) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0094) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0094) (HDMI/DP 8ch)> at nid 4 on hdaa0
ugen0.1: <AMD XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <AMD XHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
nvme0: Allocated 61MB host memory buffer
nvd0: <KBG40ZNV512G KIOXIA> NVMe namespace
nvd0: 488386MB (1000215216 512 byte sectors)
hdacc1: <Realtek ALC285 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc1
GEOM_ELI: Device nvd0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
pcm1: <Realtek ALC285 (Analog)> at nid 20 and 18 on hdaa1
pcm2: <Realtek ALC285 (Right Analog)> at nid 33 and 25 on hdaa1
Trying to mount root from zfs:zroot/ROOT/13.0-STABLE-20220206.083317 []...
uhub1: 6 ports with 6 removable, self powered
uhub0: 6 ports with 6 removable, self powered
[drm] amdgpu kernel modesetting enabled.
drmn1: <drmn> on vgapci1
vgapci1: child drmn1 requested pci_enable_io
vgapci1: child drmn1 requested pci_enable_io
[drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x103C:0x87B1 0xC7).
[drm] register mmio base: 0xFC500000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <smu>
[drm] add ip block number 5 <gfx_v9_0>
[drm] add ip block number 6 <sdma_v4_0>
[drm] add ip block number 7 <dm>
[drm] add ip block number 8 <vcn_v2_0>
[drm] add ip block number 9 <jpeg_v2_0>
drmn1: successfully loaded firmware image 'amdgpu/renoir_gpu_info.bin'
ATOM BIOS: 113-RENOIR-025
drmn1: successfully loaded firmware image 'amdgpu/renoir_sdma.bin'
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
drmn1: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
drmn1: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
drmn1: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=512M, BAR=512M
[drm] RAM width 128bits DDR4
[TTM] Zone kernel: Available graphics memory: 3838036 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
drmn1: successfully loaded firmware image 'amdgpu/renoir_asd.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_pfp.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_me.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_ce.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_rlc.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_mec.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_mec2.bin'
[drm] use_doorbell being set to: [true]
drmn1: successfully loaded firmware image 'amdgpu/renoir_dmcub.bin'
[drm] Loading DMUB firmware via PSP: version=0x00000000
ugen1.2: <SunplusIT Inc HP TrueVision HD Camera> at usbus1
drmn1: successfully loaded firmware image 'amdgpu/renoir_vcn.bin'
[drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 17
[drm] PSP loading VCN firmware
sos fw version = 0x110043.
[drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
ugen0.2: <vendor 0x093a USB OPTICAL MOUSE> at usbus0
smu driver if version = 0x0000000b, smu fw if version = 0x0000000e, smu fw version = 0x00373800 (55.56.0)
SMU driver if version not matched
SMU is initialized successfully!
[drm] kiq ring mec 2 pipe 1 q 0
[drm] Display Core initialized with v3.2.76!
[drm] DMUB hardware initialized: version=0x01020003
[drm] Connector eDP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.eDP-1
[drm] - kern.vt.fb.default_mode
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
[drm] fb mappable at 0x230C8D000
[drm] vram apper at 0x230000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
pbase=0x230c8d000 vbase=0xfffffe00c908d000
name=drmn1 flags=0x0 stride=7680 bpp=32
end FB_INFO
drmn1: ring gfx uses VM inv eng 0 on hub 0
drmn1: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn1: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn1: ring comp_1.2.0 uses VM inv eng 5 on hub 0
drmn1: ring comp_1.3.0 uses VM inv eng 6 on hub 0
drmn1: ring comp_1.0.1 uses VM inv eng 7 on hub 0
drmn1: ring comp_1.1.1 uses VM inv eng 8 on hub 0
drmn1: ring comp_1.2.1 uses VM inv eng 9 on hub 0
drmn1: ring comp_1.3.1 uses VM inv eng 10 on hub 0
drmn1: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
drmn1: ring sdma0 uses VM inv eng 0 on hub 1
drmn1: ring vcn_dec uses VM inv eng 1 on hub 1
drmn1: ring vcn_enc0 uses VM inv eng 4 on hub 1
drmn1: ring vcn_enc1 uses VM inv eng 5 on hub 1
drmn1: ring jpeg_dec uses VM inv eng 6 on hub 1
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] Initialized amdgpu 3.37.0 20150101 for drmn1 on minor 0
driver bug: Unable to set devclass (class: ppc devname: (unknown))
ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
iicbus0: <unknown card> at addr 0x15
acpi_video1: <ACPI video extension> on vgapci1
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
acpi_hp0: HP event GUID detected, installing event handler
acpi_hp0: HP CMI GUID detected
nvidia0: <Unknown> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.47.03 Mon Jan 24 22:33:26 UTC 2022
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
rtw880: <rtw_8822ce> port 0xd000-0xd0ff mem 0xfc800000-0xfc80ffff at device 0.0 on pci3
rtw880: successfully loaded firmware image 'rtw88/rtw8822c_fw.bin'
rtw880: Firmware version 9.9.11, H2C version 15
rtw880: failed to init rx buffer
rtw880: failed to allocate pci resources
rtw880: failed to setup pci resources
device_attach: rtw880 attach returned 16
rtw880: <rtw_8822ce> port 0xd000-0xd0ff mem 0xfc800000-0xfc80ffff at device 0.0 on pci3
rtw880: successfully loaded firmware image 'rtw88/rtw8822c_fw.bin'
rtw880: Firmware version 9.9.11, H2C version 15
rtw880: failed to init rx buffer
rtw880: failed to allocate pci resources
rtw880: failed to setup pci resources
device_attach: rtw880 attach returned 16
rtw880: <rtw_8822ce> port 0xd000-0xd0ff mem 0xfc800000-0xfc80ffff at device 0.0 on pci3
rtw880: successfully loaded firmware image 'rtw88/rtw8822c_fw.bin'
rtw880: Firmware version 9.9.11, H2C version 15
iichid0: <ELAN0718:01 04F3:30FD I2C HID device> at addr 0x15 on iicbus0
iichid0: Interrupt setup failed. Fallback to sampling
hidbus0: <HID bus> on iichid0
ugen0.3: <Realtek Bluetooth Radio> at usbus0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
ums0 on uhub0
ums0: <vendor 0x093a USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=0
ubt0 on uhub0
ubt0: <Bluetooth Radio> on usbus0
hms0: <ELAN0718:01 04F3:30FD Mouse> on hidbus0
hms0: 2 buttons and [XY] coordinates ID=1
hmt0: <ELAN0718:01 04F3:30FD TouchPad> on hidbus0
hconf0: <ELAN0718:01 04F3:30FD Configuration> on hidbus0
hmt0: Multitouch touchpad with 0 external buttons, click-pad
hmt0: 5 contacts with [C] properties. Report range [0:0] - [3520:1784]
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
Security policy loaded: MAC/ntpd (mac_ntpd)
ACPI Warning: \134_SB.PCI0.GPP0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20201113/nsarguments-212)
rtw880: failed to write rsvd page data
rtw880: failed to write data to rsvd page
rtw880: failed to download rsvd page
rtw880: failed to download firmware
lkpi_ic_vap_create: failed to start hw: -16
rtw880: failed to write rsvd page data
rtw880: failed to write data to rsvd page
rtw880: failed to download rsvd page
rtw880: failed to download firmware
lkpi_ic_vap_create: failed to start hw: -16
dmesg PHYSMEM:
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-STABLE #2 stable/13-n250197-91d751f798d: Fri Apr 1 14:38:19 CEST 2022
root@zerserk:/usr/obj/usr/src/amd64.amd64/sys/STEEW amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(efifb): resolution 1920x1080
Setting sysctl vfs.zfs.arc_max failed: 22
CPU: AMD Ryzen 5 4600H with Radeon Graphics (2994.45-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr,RDPRU,MCOMMIT,WBNOINVD,IBPB,IBRS,STIBP,PREFER_IBRS,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 2684170240 (2559 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 87B1 >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 8 4 11 10 9 2 3 1 7 5 6
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <HPQOEM SLIC-MPC>
Firmware Error (ACPI): Failure creating named object [\134SMIB], AE_ALREADY_EXISTS (20201113/dsfield-820)
ACPI Warning: NsLookup: Type mismatch on SMIB (Integer), searching for (RegionField) (20201113/nsaccess-869)
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP1.WLAN], AE_NOT_FOUND (20201113/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20201113/psobject-372)
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
amdsmn0: <AMD Family 17h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff at device 0.0 on pci1
hdac0: <NVIDIA (0x10fa) HDA Controller> mem 0xfc080000-0xfc083fff at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfc904000-0xfc904fff,0xfc900000-0xfc903fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: b0:5c:da:42:2f:e2
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci4: <ACPI PCI bus> on pcib4
nvme0: <Generic NVMe Device> mem 0xfc700000-0xfc703fff at device 0.0 on pci4
pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci1: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfc500000-0xfc57ffff at device 0.0 on pci5
pci5: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc300000-0xfc3fffff at device 0.3 on pci5
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff at device 0.4 on pci5
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pci5: <multimedia> at device 0.5 (no driver attached)
hdac1: <AMD Raven HDA Controller> mem 0xfc5c0000-0xfc5c7fff at device 0.6 on pci5
pcib6: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci6: <ACPI PCI bus> on pcib6
ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfc601000-0xfc6017ff at device 0.0 on pci6
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc600000-0xfc6007ff at device 0.1 on pci6
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich1: <AHCI channel> at channel 0 on ahci1
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
acpi_tz0: _CRT value is absurd, ignored (255.1C)
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
acpi_tz0: _CRT value is absurd, ignored (255.1C)
hdacc0: <NVIDIA (0x0094) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0094) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0094) (HDMI/DP 8ch)> at nid 4 on hdaa0
ugen1.1: <AMD XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <AMD XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvme0: Allocated 61MB host memory buffer
nvd0: <KBG40ZNV512G KIOXIA> NVMe namespace
nvd0: 488386MB (1000215216 512 byte sectors)
hdacc1: <Realtek ALC285 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc1
GEOM_ELI: Device nvd0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
pcm1: <Realtek ALC285 (Analog)> at nid 20 and 18 on hdaa1
pcm2: <Realtek ALC285 (Right Analog)> at nid 33 and 25 on hdaa1
Trying to mount root from zfs:zroot/ROOT/13.0-STABLE-20220206.083317 []...
uhub0: 6 ports with 6 removable, self powered
uhub1: 6 ports with 6 removable, self powered
[drm] amdgpu kernel modesetting enabled.
drmn1: <drmn> on vgapci1
vgapci1: child drmn1 requested pci_enable_io
vgapci1: child drmn1 requested pci_enable_io
[drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x103C:0x87B1 0xC7).
[drm] register mmio base: 0xFC500000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <smu>
[drm] add ip block number 5 <gfx_v9_0>
[drm] add ip block number 6 <sdma_v4_0>
[drm] add ip block number 7 <dm>
[drm] add ip block number 8 <vcn_v2_0>
[drm] add ip block number 9 <jpeg_v2_0>
drmn1: successfully loaded firmware image 'amdgpu/renoir_gpu_info.bin'
ATOM BIOS: 113-RENOIR-025
drmn1: successfully loaded firmware image 'amdgpu/renoir_sdma.bin'
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
drmn1: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
drmn1: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
drmn1: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=512M, BAR=512M
[drm] RAM width 128bits DDR4
[TTM] Zone kernel: Available graphics memory: 1354196 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 1983M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
drmn1: successfully loaded firmware image 'amdgpu/renoir_asd.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_pfp.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_me.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_ce.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_rlc.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_mec.bin'
drmn1: successfully loaded firmware image 'amdgpu/renoir_mec2.bin'
[drm] use_doorbell being set to: [true]
drmn1: successfully loaded firmware image 'amdgpu/renoir_dmcub.bin'
[drm] Loading DMUB firmware via PSP: version=0x00000000
drmn1: successfully loaded firmware image 'amdgpu/renoir_vcn.bin'
[drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 17
[drm] PSP loading VCN firmware
sos fw version = 0x110043.
[drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
ugen1.2: <SunplusIT Inc HP TrueVision HD Camera> at usbus1
ugen0.2: <vendor 0x093a USB OPTICAL MOUSE> at usbus0
smu driver if version = 0x0000000b, smu fw if version = 0x0000000e, smu fw version = 0x00373800 (55.56.0)
SMU driver if version not matched
SMU is initialized successfully!
[drm] kiq ring mec 2 pipe 1 q 0
[drm] Display Core initialized with v3.2.76!
[drm] DMUB hardware initialized: version=0x01020003
[drm] Connector eDP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.eDP-1
[drm] - kern.vt.fb.default_mode
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
[drm] fb mappable at 0x230C8D000
[drm] vram apper at 0x230000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
pbase=0x230c8d000 vbase=0xfffffe009aa8d000
name=drmn1 flags=0x0 stride=7680 bpp=32
end FB_INFO
drmn1: ring gfx uses VM inv eng 0 on hub 0
drmn1: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn1: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn1: ring comp_1.2.0 uses VM inv eng 5 on hub 0
drmn1: ring comp_1.3.0 uses VM inv eng 6 on hub 0
drmn1: ring comp_1.0.1 uses VM inv eng 7 on hub 0
drmn1: ring comp_1.1.1 uses VM inv eng 8 on hub 0
drmn1: ring comp_1.2.1 uses VM inv eng 9 on hub 0
drmn1: ring comp_1.3.1 uses VM inv eng 10 on hub 0
drmn1: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
drmn1: ring sdma0 uses VM inv eng 0 on hub 1
drmn1: ring vcn_dec uses VM inv eng 1 on hub 1
drmn1: ring vcn_enc0 uses VM inv eng 4 on hub 1
drmn1: ring vcn_enc1 uses VM inv eng 5 on hub 1
drmn1: ring jpeg_dec uses VM inv eng 6 on hub 1
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] Initialized amdgpu 3.37.0 20150101 for drmn1 on minor 0
driver bug: Unable to set devclass (class: ppc devname: (unknown))
ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
iicbus0: <unknown card> at addr 0x15
acpi_video1: <ACPI video extension> on vgapci1
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
acpi_hp0: HP event GUID detected, installing event handler
acpi_hp0: HP CMI GUID detected
nvidia0: <Unknown> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.47.03 Mon Jan 24 22:33:26 UTC 2022
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
rtw880: <rtw_8822ce> port 0xd000-0xd0ff mem 0xfc800000-0xfc80ffff at device 0.0 on pci3
rtw880: successfully loaded firmware image 'rtw88/rtw8822c_fw.bin'
rtw880: Firmware version 9.9.11, H2C version 15
iichid0: <ELAN0718:01 04F3:30FD I2C HID device> at addr 0x15 on iicbus0
iichid0: Interrupt setup failed. Fallback to sampling
hidbus0: <HID bus> on iichid0
ugen0.3: <Realtek Bluetooth Radio> at usbus0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
ums0 on uhub1
ums0: <vendor 0x093a USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=0
ubt0 on uhub1
ubt0: <Bluetooth Radio> on usbus0
hms0: <ELAN0718:01 04F3:30FD Mouse> on hidbus0
hms0: 2 buttons and [XY] coordinates ID=1
hmt0: <ELAN0718:01 04F3:30FD TouchPad> on hidbus0
hconf0: <ELAN0718:01 04F3:30FD Configuration> on hidbus0
hmt0: Multitouch touchpad with 0 external buttons, click-pad
hmt0: 5 contacts with [C] properties. Report range [0:0] - [3520:1784]
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
Security policy loaded: MAC/ntpd (mac_ntpd)
ACPI Warning: \134_SB.PCI0.GPP0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20201113/nsarguments-212)
rtw880: start vif 8c:c8:4b:59:ee:75 on port 0
wlan0: Ethernet address: 8c:c8:4b:59:ee:75
ifconfig with PHYSMEM:
wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 8c:c8:4b:59:ee:75
groups: wlan
ssid "" channel 1 (2412 MHz 11b)
regdomain FCC country US authmode OPEN privacy OFF txpower 30 bmiss 7
scanvalid 60 wme bintval 0
parent interface: rtw880
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
------- Original Message -------
On Friday, April 1st, 2022 at 12:43 PM, Bjoern A. Zeeb <bzeeb-lists@lists.zabbadoz.net> wrote:
> On Fri, 1 Apr 2022, Daniel Pérez wrote:
>
> > As always, thank you for your hard work, Bjoern.
> > Will test the mentioned stuff as soon as I am able to, hopefully I can get it built in STABLE/13.
>
>
> git cherry-pick -x 86220d3cbd500b1018dcdabb0ba70644db438cfd (until the next days)
> git cherry-pick -x 2774f206809b8fd3a4904fe945f029a414fbc642
> git cherry-pick -x 73d4ebea3567f18db549638c3d897b6d6758faa4
> git cherry-pick -x 20eeed6844e2ab82b909e02c720101297e78d916
>
> merges without problems on a stable/13 for me. I'll start a build as
> well but I am not expecting surprises.
>
> Hope this helps.
> Bjoern
>
> --
> Bjoern A. Zeeb r15:7