Re: ipmi0: Watchdog set returned 0xc0 (releng_13)
- In reply to: Alexander Motin : "Re: ipmi0: Watchdog set returned 0xc0 (releng_13)"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Thu, 16 Sep 2021 13:04:44 UTC
On 9/15/2021 7:19 PM, Alexander Motin wrote: > ipmi0: Watchdog set returned 0xc0 >> ipmi0: Watchdog set returned 0xc0 >> ipmi0: Watchdog set returned 0xc0 >> ipmi0: Watchdog set returned 0xc0 >> ipmi0: Watchdog set returned 0xc0 >> >> The initial attach looks as >> >> ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0 >> ipmi0: KCS mode found at io 0xca2 on acpi >> ipmi0: IPMI device rev. 1, firmware rev. 1.73, version 2.0, device >> support mask 0xbf >> ipmi0: Number of channels 2 >> ipmi0: Attached watchdog >> ipmi0: Establishing power cycle handler > Status 0xc0 means "Node Busy. Command could not be processed because > command processing resources are temporarily unavailable.". Some > sources propose command retrial after delay, but considering it is > reported regularly I suppose it won't help. > > Have you tried to reset the BMC, for example with `ipmitool mc reset > cold`, may be it unstuck that "Busy"? Thanks, that seems to have fixed it in that I no longer see the 0xc0 message. Its a production box so I dont want to test the dog. But I think I have another board in the back somewhere I can dig out and test with ---Mike