Re: hang up at mount on releng/13
- In reply to: Mori Hiroki : "Re: hang up at mount on releng/13"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Tue, 22 Jun 2021 17:26:34 UTC
Hi! Err, I use UFS in a ramdisk on my 93xx / 71xx test APs here at home. Lemme go see what's going on. -adrian On Thu, 10 Jun 2021 at 00:34, Mori Hiroki <yamori813@yahoo.co.jp> wrote: > > Hi > > enclose ffs_balloc_ufs1 disassembly. > > > ----- Original Message ----- > > From: Mori Hiroki <yamori813@yahoo.co.jp> > > To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> > > Cc: > > Date: 2021/6/10, Thu 16:01 > > Subject: Re: hang up at mount on releng/13 > > > > Hi > > > > ZRouter use ufs.ko, Is this relation the problem ? > > > > > > Hiroki Mori > > > > > > > > ----- Original Message ----- > >> From: Mori Hiroki <yamori813@yahoo.co.jp> > >> To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> > >> Cc: > >> Date: 2021/6/10, Thu 05:48 > >> Subject: Re: hang up at mount on releng/13 > >> > >> Hi > >> > >> I try to CURRENT today. I have panic now. > >> > >> > >> BTW releng/13 build time is 2:22 but current is 4:28 what is differnet ? > >> > >> > >> Starting kernel ... > >> > >> CPU platform: Atheros AR9341 rev 1 > >> CPU Frequency=535 MHz > >> CPU DDR Frequency=400 MHz > >> CPU AHB Frequency=200 MHz > >> platform frequency: 535 MHz > >> CPU reference clock: 25 MHz > >> CPU MDIO clock: 25 MHz > >> arguments: > >> a0 = 00000007 > >> a1 = a1f73fb0 > >> a2 = a1f74470 > >> a3 = 00000004 > >> Cmd line:argv is invalid > >> Environment: > >> envp is invalid > >> Cache info: > >> picache_stride = 4096 > >> picache_loopcount = 16 > >> pdcache_stride = 4096 > >> pdcache_loopcount = 8 > >> max line size = 32 > >> Physical memory chunk(s): > >> 0x3de000 - 0x1ffffff, 29499392 bytes (7202 pages) > >> Maxmem is 0x2000000 > >> ---<<BOOT>>--- > >> ar934x_chip_init_gmac: gmac_cfg=0x000001c0 > >> ar934x_configure_gmac: ETH_CFG=0x00003000 > >> KDB: debugger backends: ddb > >> KDB: current backend: ddb > >> Copyright (c) 1992-2021 The FreeBSD Project. > >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > >> The Regents of the University of California. All rights reserved. > >> FreeBSD is a registered trademark of The FreeBSD Foundation. > >> FreeBSD 14.0-CURRENT #0 main-5e5ca4c8f: Thu Jun 10 05:30:42 JST 2021 > >> > >> > > hiroki@zrouter:/usr/home/hiroki/obj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/current/mips.mips/sys/IOData_WN-G300R > > > >> mips > >> FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git > >> llvmorg-11.0.1-0-g43ff75f2c3fe) > >> Preloaded elf kernel "kernel" at 0x803d7690. > >> CPU: MIPS Technologies (Atheros AR9341 rev 1) processor v76.151 > >> MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) > >> L1 i-cache: 4 ways of 512 sets, 32 bytes per line > >> L1 d-cache: 4 ways of 256 sets, 32 bytes per line > >> L2 cache: disabled > >> Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> > >> Config2=0x80001000 > >> Config3=0x2c20<ULRI> > >> Config7=0x80000800<WII> > >> real memory = 33554432 (32768K bytes) > >> Physical memory chunk(s): > >> 0x0046a000 - 0x01f84fff, 28422144 bytes (6939 pages) > >> avail memory = 27918336 (26MB) > >> random: no preloaded entropy cache > >> arc4random: WARNING: initial seeding bypassed the cryptographic random > > device > >> because it was not yet seeded and the knob 'bypass_before_seeding' > > was > >> enabled. > >> hostuuid: using 00000000-0000-0000-0000-000000000000 > >> random: entropy device external interface > >> mem: <memory> > >> null: <full device, null device, zero device> > >> nexus0: <MIPS32 root nexus> > >> argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO > > controller> > >> at mem 0x19000000-0x19000fff on nexus0 > >> mdio0: <MDIO> on argemdio0 > >> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 > >> clock0: <Generic MIPS32 ticker> on nexus0 > >> Timecounter "MIPS32" frequency 267500000 Hz quality 800 > >> Event timer "MIPS32" frequency 267500000 Hz quality 800 > >> argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO > > controller> > >> at mem 0x1a000000-0x1a000fff on nexus0 > >> mdio1: <MDIO> on argemdio1 > >> mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1 > >> arswitch0: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on mdio1 > >> arswitch0: ar9340_hw_global_setup: GMII > >> arswitch0: ar9340_hw_global_setup: PHY4 - CPU > >> miibus0: <MII bus> on arswitch0 > >> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 > >> ukphy0: OUI 0x00c82e, model 0x0004, rev. 2 > >> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > > 1000baseT-FDX, > >> 1000baseT-FDX-master, auto > >> miibus1: <MII bus> on arswitch0 > >> ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 > >> ukphy1: OUI 0x00c82e, model 0x0004, rev. 2 > >> ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > > 1000baseT-FDX, > >> 1000baseT-FDX-master, auto > >> miibus2: <MII bus> on arswitch0 > >> ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 > >> ukphy2: OUI 0x00c82e, model 0x0004, rev. 2 > >> ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > > 1000baseT-FDX, > >> 1000baseT-FDX-master, auto > >> miibus3: <MII bus> on arswitch0 > >> ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 > >> ukphy3: OUI 0x00c82e, model 0x0004, rev. 2 > >> ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > > 1000baseT-FDX, > >> 1000baseT-FDX-master, auto > >> etherswitch0: <Switch controller> on arswitch0 > >> mdio2: <MDIO> on arswitch0 > >> mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2 > >> apb0 at irq 4 on nexus0 > >> uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on > > apb0 > >> uart0: console (115200,n,8,1) > >> uart0: fast interrupt > >> uart0: PPS capture mode: DCD > >> gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq > > 2 on > >> apb0 > >> gpio0: [GIANT-LOCKED] > >> gpio0: function_set: 0x0 > >> gpio0: function_clear: 0x0 > >> gpio0: gpio pinmask=0x7da000 > >> gpiobus0: <GPIO bus> on gpio0 > >> gpioled0: <GPIO led> at pin 15 on gpiobus0 > >> gpioled1: <GPIO led> at pin 13 on gpiobus0 > >> gpioled2: <GPIO led> at pin 18 on gpiobus0 > >> gpioc0: <GPIO controller> on gpio0 > >> arge0: <Atheros AR71xx built-in ethernet interface> at mem > >> 0x19000000-0x19000fff irq 2 on nexus0 > >> arge0: Generating random ethernet address. > >> miiproxy0: <MII/MDIO proxy, MII side> on arge0 > >> miiproxy0: attached to target mdio2 > >> arge0: finishing attachment, phymask 0001, proxy set > >> miibus4: <MII bus> on miiproxy0 > >> ukphy4: <Generic IEEE 802.3u media interface> PHY 0 on miibus4 > >> ukphy4: OUI 0x00c82e, model 0x0004, rev. 2 > >> ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > > 1000baseT-FDX, > >> 1000baseT-FDX-master, auto > >> arge0: bpf attached > >> arge0: Ethernet address: 0e:94:ca:cb:ce:77 > >> arge1: <Atheros AR71xx built-in ethernet interface> at mem > >> 0x1a000000-0x1a000fff irq 3 on nexus0 > >> arge1: arge_attach: overriding MII mode to 'GMII' > >> arge1: Generating random ethernet address. > >> mii_attach_proxy: not attaching, no mdio device hint for arge1 > >> arge1: finishing attachment, phymask 0000, proxy null > >> arge1: bpf attached > >> arge1: Ethernet address: c2:db:7b:5e:18:40 > >> spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 > >> spibus0: <SPI bus> on spi0 > >> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 > >> mx25l0: device type en25q32, size 4096K in 64 sectors of 64K, erase size > > 64K > >> ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 > >> Device configuration finished. > >> Timecounters tick every 1.000 msec > >> lo0: bpf attached > >> vlan: initialized, using hash tables with chaining > >> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512 > >> arswitch0port1: link state changed to DOWN > >> arswitch0port2: link state changed to DOWN > >> arswitch0port3: link state changed to DOWN > >> arswitch0port4: link state changed to DOWN > >> GEOM: new disk flash/spi0 > >> Trying to mount root from cd9660:/dev/map/rootfs.uzip []... > >> MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/bootloader" > >> MAP: flash/spi0: 40000x3a0000, data=0x3a0000 "/dev/map/upgrade" > >> MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step > > 0x10000 > >> MAP: flash/spi0: 40000x110000, data=0x110000 "/dev/map/kernel" > >> MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step > > 0x10000 > >> MAP: flash/spi0: 150000x290000, data=0x290000 "/dev/map/rootfs" > >> MAP: flash/spi0: 3f0000x10000, data=0x10000 "/dev/map/ART" > >> MAP: No valid partition found at map/rootfs.uzip > >> cd9660: RockRidge Extension > >> Warning: no time-of-day clock registered, system time will not be set > > accurately > >> start_init: trying /sbin/init > >> arswitch0: arswitch_miipollstat: port 1: port -> UP > >> arswitch0port2: link state changed to UP > >> gpio_pin_set_flags: Invalid argument > >> kenv: unable to get HostName > >> > >> kern.coredump: 1 -> 0 > >> net.inet.ip.forwarding: 0 -> 1 > >> memory disk size = 10m > >> MAP: No valid partition found at md0 > >> random: unblocking device. > >> MAP: No valid partition found at md0 > >> Trap cause = 4 (address error (load or I-fetch) - kernel mode) > >> panic: trap > >> time = 30 > >> KDB: enter: panic > >> [ thread pid 34 tid 100038 ] > >> Stopped at 0x4 > >> db> where > >> Tracing pid 34 tid 100038 td 0x806ef7c0 > >> kdb_enter+0x54 (?,?,?,?) ra 800f3fac sp c5531758 sz 32 > >> vpanic+0x158 (?,?,?,?) ra 800f3e4c sp c5531778 sz 48 > >> panic+0x20 (?,?,?,?) ra 802d8e6c sp c55317a8 sz 32 > >> trap+0x1014 (?,?,?,?) ra 802c6618 sp c55317c8 sz 152 > >> MipsKernGenException+0xe4 (?,?,?,?) ra 0 sp c5531860 sz 0 > >> --- exception, cause ffffffffc077a410 badvaddr 1d000000 --- > >> ffs_balloc_ufs1+0x7ec (?,?,?,?) ra 80688100 sp c5531928 sz 400 > >> 0x806880f8 (?,?,?,?) ra 0 sp c5531ab8 sz 0 > >> db> ps > >> pid ppid pgrp uid state wmesg wchan cmd > >> 34 25 17 0 R+ CPU 0 mount > >> 32 0 0 0 DL mdwait 0x80a1d000 [md0] > >> 25 17 17 0 R+ sh > >> 17 1 17 0 Ss+ wait 0xc017f380 sh > >> 16 0 0 0 DL - 0x803cbd00 [soaiod4] > >> 15 0 0 0 DL - 0x803cbd00 [soaiod3] > >> 14 0 0 0 DL - 0x803cbd00 [soaiod2] > >> 13 0 0 0 DL - 0x803cbd00 [soaiod1] > >> 9 0 0 0 DL wrkwait 0x80646380 [map/rootfs.uzip] > >> 8 0 0 0 DL - 0x802f7270 [schedcpu] > >> 7 0 0 0 RL [syncer] > >> 6 0 0 0 RL [vnlru] > >> 5 0 0 0 RL (threaded) [bufdaemon] > >> 100024 RunQ [bufdaemon] > >> 100030 D - 0x80399400 [bufspacedaemon-0] > >> 4 0 0 0 RL (threaded) [pagedaemon] > >> 100023 RunQ [dom0] > >> 100028 D launds 0x803d6ee4 [laundry: dom0] > >> 100029 D umarcl 0x802827f8 [uma] > >> 3 0 0 0 RL [rand_harvestq] > >> 2 0 0 0 DL mx25jq 0x805d2c00 [task: mx25l flash] > >> 12 0 0 0 RL (threaded) [geom] > >> 100014 RunQ [g_event] > >> 100015 D - 0x803a56cc [g_up] > >> 100016 D - 0x803a56d0 [g_down] > >> 11 0 0 0 RL (threaded) [intr] > >> 100006 I [swi5: fast taskq] > >> 100008 I [swi6: task queue] > >> 100009 I [swi6: Giant taskq] > >> 100011 I [swi3: vm] > >> 100012 I [swi1: netisr 0] > >> 100013 RunQ [swi4: clock (0)] > >> 100017 I [swi0: uart] > >> 100018 I [apb intr2: gpio0] > >> 100019 I [int2 arge0] > >> 100020 I [int3 arge1] > >> 10 0 0 0 RL [idle] > >> 1 0 1 0 SLs wait 0xc0165c00 [init] > >> 0 0 0 0 DLs (threaded) [kernel] > >> 100000 D swapin 0x803a5b78 [swapper] > >> 100003 D - 0x8058be00 [softirq_0] > >> 100004 D - 0x8058bd00 [thread taskq] > >> 100005 D - 0x8058bc00 [inm_free taskq] > >> 100007 D - 0x8058b900 [kqueue_ctx taskq] > >> 100010 D - 0x8058b400 [aiod_kick taskq] > >> db> > >> > >> > >> > >> > >> > >> > >> > >> ----- Original Message ----- > >>> From: Mori Hiroki <yamori813@yahoo.co.jp> > >>> To: "freebsd-mips@freebsd.org" > > <freebsd-mips@freebsd.org> > >>> Date: 2021/6/5, Sat 08:57 > >>> Subject: hang up at mount on releng/13 > >>> > >>> Hi > >>> I try to boot releng/13 on AR9341. > >>> I have hung up on mount. > >>> If you have advice, please let me know. > >>> Thanks > >>> Hiroki Mori > >>> > >>> ---<<BOOT>>--- > >>> ar934x_chip_init_gmac: gmac_cfg=0x000001c0 > >>> ar934x_configure_gmac: ETH_CFG=0x00003000 > >>> KDB: debugger backends: ddb > >>> KDB: current backend: ddb > >>> Copyright (c) 1992-2021 The FreeBSD Project. > >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > > 1994 > >>> The Regents of the University of California. All rights > > reserved. > >>> FreeBSD is a registered trademark of The FreeBSD Foundation. > >>> FreeBSD 13.0-RELEASE-p2 #1 releng/13.0-b74cdf1ec: Sat Jun 5 08:41:04 > > JST > >> 2021 > >>> > >> > > hiroki@zrouter:/usr/home/hiroki/obj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/src/mips.mips/sys/IOData_WN-G300R > > > >> mips > >>> FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git > >> llvmorg-11.0.1-0-g43ff75f2c3fe) > >>> Preloaded elf kernel "kernel" at 0x803cf390. > >>> CPU: MIPS Technologies (Atheros AR9341 rev 1) processor v76.151 > >>> MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg > > sizes) > >>> L1 i-cache: 4 ways of 512 sets, 32 bytes per line > >>> L1 d-cache: 4 ways of 256 sets, 32 bytes per line > >>> L2 cache: disabled > >>> Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> > >>> Config2=0x80001000 > >>> Config3=0x2c20<ULRI> > >>> Config7=0x80000800<WII> > >>> real memory = 33554432 (32768K bytes) > >>> Physical memory chunk(s): > >>> 0x00462000 - 0x01f83fff, 28450816 bytes (6946 pages) > >>> avail memory = 27947008 (26MB) > >>> random: no preloaded entropy cache > >>> arc4random: WARNING: initial seeding bypassed the cryptographic random > >> device because it was not yet seeded and the knob > >> 'bypass_before_seeding' was enabled. > >>> hostuuid: using 00000000-0000-0000-0000-000000000000 > >>> random: entropy device external interface > >>> mem: <memory> > >>> null: <full device, null device, zero device> > >>> nexus0: <MIPS32 root nexus> > >>> argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO > >> controller> at mem 0x19000000-0x19000fff on nexus0 > >>> mdio0: <MDIO> on argemdio0 > >>> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 > >>> clock0: <Generic MIPS32 ticker> on nexus0 > >>> Timecounter "MIPS32" frequency 267500000 Hz quality 800 > >>> Event timer "MIPS32" frequency 267500000 Hz quality 800 > >>> argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO > >> controller> at mem 0x1a000000-0x1a000fff on nexus0 > >>> mdio1: <MDIO> on argemdio1 > >>> mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1 > >>> arswitch0: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on > > mdio1 > >>> arswitch0: ar9340_hw_global_setup: GMII > >>> arswitch0: ar9340_hw_global_setup: PHY4 - CPU > >>> miibus0: <MII bus> on arswitch0 > >>> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 > >>> ukphy0: OUI 0x00c82e, model 0x0004, rev. 2 > >>> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > >> 1000baseT-FDX, 1000baseT-FDX-master, auto > >>> miibus1: <MII bus> on arswitch0 > >>> ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 > >>> ukphy1: OUI 0x00c82e, model 0x0004, rev. 2 > >>> ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > >> 1000baseT-FDX, 1000baseT-FDX-master, auto > >>> miibus2: <MII bus> on arswitch0 > >>> ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 > >>> ukphy2: OUI 0x00c82e, model 0x0004, rev. 2 > >>> ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > >> 1000baseT-FDX, 1000baseT-FDX-master, auto > >>> miibus3: <MII bus> on arswitch0 > >>> ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 > >>> ukphy3: OUI 0x00c82e, model 0x0004, rev. 2 > >>> ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > >> 1000baseT-FDX, 1000baseT-FDX-master, auto > >>> etherswitch0: <Switch controller> on arswitch0 > >>> mdio2: <MDIO> on arswitch0 > >>> mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2 > >>> apb0 at irq 4 on nexus0 > >>> uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 > > on > >> apb0 > >>> uart0: console (115200,n,8,1) > >>> uart0: fast interrupt > >>> uart0: PPS capture mode: DCD > >>> gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff > > irq 2 > >> on apb0 > >>> gpio0: [GIANT-LOCKED] > >>> gpio0: function_set: 0x0 > >>> gpio0: function_clear: 0x0 > >>> gpio0: gpio pinmask=0x7da000 > >>> gpiobus0: <GPIO bus> on gpio0 > >>> gpioled0: <GPIO led> at pin 15 on gpiobus0 > >>> gpioled1: <GPIO led> at pin 13 on gpiobus0 > >>> gpioled2: <GPIO led> at pin 18 on gpiobus0 > >>> gpioc0: <GPIO controller> on gpio0 > >>> arge0: <Atheros AR71xx built-in ethernet interface> at mem > >> 0x19000000-0x19000fff irq 2 on nexus0 > >>> arge0: Generating random ethernet address. > >>> miiproxy0: <MII/MDIO proxy, MII side> on arge0 > >>> miiproxy0: attached to target mdio2 > >>> arge0: finishing attachment, phymask 0001, proxy set > >>> miibus4: <MII bus> on miiproxy0 > >>> ukphy4: <Generic IEEE 802.3u media interface> PHY 0 on miibus4 > >>> ukphy4: OUI 0x00c82e, model 0x0004, rev. 2 > >>> ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > >> 1000baseT-FDX, 1000baseT-FDX-master, auto > >>> arge0: bpf attached > >>> arge0: Ethernet address: 58:9c:fc:10:46:76 > >>> arge1: <Atheros AR71xx built-in ethernet interface> at mem > >> 0x1a000000-0x1a000fff irq 3 on nexus0 > >>> arge1: arge_attach: overriding MII mode to 'GMII' > >>> arge1: Generating random ethernet address. > >>> mii_attach_proxy: not attaching, no mdio device hint for arge1 > >>> arge1: finishing attachment, phymask 0000, proxy null > >>> arge1: bpf attached > >>> arge1: Ethernet address: 58:9c:fc:10:ff:83 > >>> spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 > >>> spibus0: <SPI bus> on spi0 > >>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 > >>> mx25l0: device type en25q32, size 4096K in 64 sectors of 64K, erase > > size 64K > >>> ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 > >>> Device configuration finished. > >>> Timecounters tick every 1.000 msec > >>> lo0: bpf attached > >>> vlan: initialized, using hash tables with chaining > >>> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512 > >>> arswitch0port1: link state changed to DOWN > >>> arswitch0port2: link state changed to DOWN > >>> arswitch0port3: link state changed to DOWN > >>> arswitch0port4: link state changed to DOWN > >>> GEOM: new disk flash/spi0 > >>> Trying to mount root from cd9660:/dev/map/rootfs.uzip []... > >>> MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/bootloader" > >>> MAP: flash/spi0: 40000x3a0000, data=0x3a0000 > > "/dev/map/upgrade" > >>> MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, > > step > >> 0x10000 > >>> MAP: flash/spi0: 40000x100000, data=0x100000 > > "/dev/map/kernel" > >>> MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, > > step > >> 0x10000 > >>> MAP: flash/spi0: 140000x2a0000, data=0x2a0000 > > "/dev/map/rootfs" > >>> MAP: flash/spi0: 3f0000x10000, data=0x10000 "/dev/map/ART" > >>> MAP: No valid partition found at map/rootfs.uzip > >>> cd9660: RockRidge Extension > >>> Warning: no time-of-day clock registered, system time will not be set > >> accurately > >>> start_init: trying /sbin/init > >>> arswitch0: arswitch_miipollstat: port 0: port -> UP > >>> arswitch0port1: link state changed to UP > >>> # /sbin/mdconfig -a -t malloc -s 2m > >>> MAP: No valid partition found at md0 > >>> md0 > >>> # newfs -b 4096 -f 512 -n -o space /dev/md0 > >>> random: unblocking device. > >>> /dev/md0: 2.0MB (4096 sectors) block size 4096, fragment size 512 > >>> using 4 cylinder groups of 0.50MB, 129 blks, 528 inodes. > >>> super-block backups (for fsck_ffs -b #) at: > >>> 144, 1176, 2208, 3240 > >>> MAP: No valid partition found at md0 > >>> # mount /dev/md0 /mnt > >>> ~KDB: enter: Break to debugger > >>> [ thread pid 27 tid 100037 ] > >>> Stopped at 0x4 > >>> db> ps > >>> pid ppid pgrp uid state wmesg wchan cmd > >>> 27 19 27 0 R+ CPU 0 mount > >>> 25 0 0 0 DL mdwait 0x80b04000 [md0] > >>> 19 1 19 0 Ss+ wait 0xc017f380 sh > >>> 16 0 0 0 RL [soaiod4] > >>> 15 0 0 0 RL [soaiod3] > >>> 14 0 0 0 RL [soaiod2] > >>> 13 0 0 0 RL [soaiod1] > >>> 9 0 0 0 DL wrkwait 0x8063c380 [map/rootfs.uzip] > >>> 8 0 0 0 RL [schedcpu] > >>> 7 0 0 0 RL [syncer] > >>> 6 0 0 0 RL [vnlru] > >>> 5 0 0 0 RL (threaded) [bufdaemon] > >>> 100024 RunQ [bufdaemon] > >>> 100030 RunQ [bufspacedaemon-0] > >>> 4 0 0 0 RL (threaded) [pagedaemon] > >>> 100023 RunQ [dom0] > >>> 100028 D launds 0x803cebe4 [laundry: dom0] > >>> 100029 RunQ [uma] > >>> 3 0 0 0 RL [rand_harvestq] > >>> 2 0 0 0 DL mx25jq 0x805cbc00 [task: mx25l > > flash] > >>> 12 0 0 0 RL (threaded) [geom] > >>> 100014 RunQ [g_event] > >>> 100015 D - 0x8039d41c [g_up] > >>> 100016 D - 0x8039d420 [g_down] > >>> 11 0 0 0 RL (threaded) [intr] > >>> 100006 I [swi5: fast taskq] > >>> 100008 I [swi6: task queue] > >>> 100009 I [swi6: Giant > > taskq] > >>> 100011 I [swi3: vm] > >>> 100012 I [swi1: netisr 0] > >>> 100013 RunQ [swi4: clock (0)] > >>> 100017 RunQ [swi0: uart] > >>> 100018 I [apb intr2: gpio0] > >>> 100019 I [int2 arge0] > >>> 100020 I [int3 arge1] > >>> 10 0 0 0 RL [idle] > >>> 1 0 1 0 SLs wait 0xc0165c00 [init] > >>> 0 0 0 0 RLs (threaded) [kernel] > >>> 100000 RunQ [swapper] > >>> 100003 D - 0x80585e00 [softirq_0] > >>> 100004 D - 0x80585d00 [thread taskq] > >>> 100005 D - 0x80585c00 [inm_free taskq] > >>> 100007 D - 0x80585900 [kqueue_ctx taskq] > >>> 100010 D - 0x80585400 [aiod_kick taskq] > >>> db> > >>> > >>> > >> > >