Re: hang up at mount on releng/13
- Reply: Adrian Chadd : "Re: hang up at mount on releng/13"
- In reply to: Mori Hiroki : "Re: hang up at mount on releng/13"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Thu, 10 Jun 2021 07:33:44 UTC
Hi enclose ffs_balloc_ufs1 disassembly. ----- Original Message ----- > From: Mori Hiroki <yamori813@yahoo.co.jp> > To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> > Cc: > Date: 2021/6/10, Thu 16:01 > Subject: Re: hang up at mount on releng/13 > > Hi > > ZRouter use ufs.ko, Is this relation the problem ? > > > Hiroki Mori > > > > ----- Original Message ----- >> From: Mori Hiroki <yamori813@yahoo.co.jp> >> To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> >> Cc: >> Date: 2021/6/10, Thu 05:48 >> Subject: Re: hang up at mount on releng/13 >> >> Hi >> >> I try to CURRENT today. I have panic now. >> >> >> BTW releng/13 build time is 2:22 but current is 4:28 what is differnet ? >> >> >> Starting kernel ... >> >> CPU platform: Atheros AR9341 rev 1 >> CPU Frequency=535 MHz >> CPU DDR Frequency=400 MHz >> CPU AHB Frequency=200 MHz >> platform frequency: 535 MHz >> CPU reference clock: 25 MHz >> CPU MDIO clock: 25 MHz >> arguments: >> a0 = 00000007 >> a1 = a1f73fb0 >> a2 = a1f74470 >> a3 = 00000004 >> Cmd line:argv is invalid >> Environment: >> envp is invalid >> Cache info: >> picache_stride = 4096 >> picache_loopcount = 16 >> pdcache_stride = 4096 >> pdcache_loopcount = 8 >> max line size = 32 >> Physical memory chunk(s): >> 0x3de000 - 0x1ffffff, 29499392 bytes (7202 pages) >> Maxmem is 0x2000000 >> ---<<BOOT>>--- >> ar934x_chip_init_gmac: gmac_cfg=0x000001c0 >> ar934x_configure_gmac: ETH_CFG=0x00003000 >> KDB: debugger backends: ddb >> KDB: current backend: ddb >> Copyright (c) 1992-2021 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 14.0-CURRENT #0 main-5e5ca4c8f: Thu Jun 10 05:30:42 JST 2021 >> >> > hiroki@zrouter:/usr/home/hiroki/obj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/current/mips.mips/sys/IOData_WN-G300R > >> mips >> FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git >> llvmorg-11.0.1-0-g43ff75f2c3fe) >> Preloaded elf kernel "kernel" at 0x803d7690. >> CPU: MIPS Technologies (Atheros AR9341 rev 1) processor v76.151 >> MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) >> L1 i-cache: 4 ways of 512 sets, 32 bytes per line >> L1 d-cache: 4 ways of 256 sets, 32 bytes per line >> L2 cache: disabled >> Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> >> Config2=0x80001000 >> Config3=0x2c20<ULRI> >> Config7=0x80000800<WII> >> real memory = 33554432 (32768K bytes) >> Physical memory chunk(s): >> 0x0046a000 - 0x01f84fff, 28422144 bytes (6939 pages) >> avail memory = 27918336 (26MB) >> random: no preloaded entropy cache >> arc4random: WARNING: initial seeding bypassed the cryptographic random > device >> because it was not yet seeded and the knob 'bypass_before_seeding' > was >> enabled. >> hostuuid: using 00000000-0000-0000-0000-000000000000 >> random: entropy device external interface >> mem: <memory> >> null: <full device, null device, zero device> >> nexus0: <MIPS32 root nexus> >> argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO > controller> >> at mem 0x19000000-0x19000fff on nexus0 >> mdio0: <MDIO> on argemdio0 >> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 >> clock0: <Generic MIPS32 ticker> on nexus0 >> Timecounter "MIPS32" frequency 267500000 Hz quality 800 >> Event timer "MIPS32" frequency 267500000 Hz quality 800 >> argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO > controller> >> at mem 0x1a000000-0x1a000fff on nexus0 >> mdio1: <MDIO> on argemdio1 >> mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1 >> arswitch0: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on mdio1 >> arswitch0: ar9340_hw_global_setup: GMII >> arswitch0: ar9340_hw_global_setup: PHY4 - CPU >> miibus0: <MII bus> on arswitch0 >> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 >> ukphy0: OUI 0x00c82e, model 0x0004, rev. 2 >> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseT-FDX, >> 1000baseT-FDX-master, auto >> miibus1: <MII bus> on arswitch0 >> ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 >> ukphy1: OUI 0x00c82e, model 0x0004, rev. 2 >> ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseT-FDX, >> 1000baseT-FDX-master, auto >> miibus2: <MII bus> on arswitch0 >> ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 >> ukphy2: OUI 0x00c82e, model 0x0004, rev. 2 >> ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseT-FDX, >> 1000baseT-FDX-master, auto >> miibus3: <MII bus> on arswitch0 >> ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 >> ukphy3: OUI 0x00c82e, model 0x0004, rev. 2 >> ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseT-FDX, >> 1000baseT-FDX-master, auto >> etherswitch0: <Switch controller> on arswitch0 >> mdio2: <MDIO> on arswitch0 >> mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2 >> apb0 at irq 4 on nexus0 >> uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on > apb0 >> uart0: console (115200,n,8,1) >> uart0: fast interrupt >> uart0: PPS capture mode: DCD >> gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq > 2 on >> apb0 >> gpio0: [GIANT-LOCKED] >> gpio0: function_set: 0x0 >> gpio0: function_clear: 0x0 >> gpio0: gpio pinmask=0x7da000 >> gpiobus0: <GPIO bus> on gpio0 >> gpioled0: <GPIO led> at pin 15 on gpiobus0 >> gpioled1: <GPIO led> at pin 13 on gpiobus0 >> gpioled2: <GPIO led> at pin 18 on gpiobus0 >> gpioc0: <GPIO controller> on gpio0 >> arge0: <Atheros AR71xx built-in ethernet interface> at mem >> 0x19000000-0x19000fff irq 2 on nexus0 >> arge0: Generating random ethernet address. >> miiproxy0: <MII/MDIO proxy, MII side> on arge0 >> miiproxy0: attached to target mdio2 >> arge0: finishing attachment, phymask 0001, proxy set >> miibus4: <MII bus> on miiproxy0 >> ukphy4: <Generic IEEE 802.3u media interface> PHY 0 on miibus4 >> ukphy4: OUI 0x00c82e, model 0x0004, rev. 2 >> ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseT-FDX, >> 1000baseT-FDX-master, auto >> arge0: bpf attached >> arge0: Ethernet address: 0e:94:ca:cb:ce:77 >> arge1: <Atheros AR71xx built-in ethernet interface> at mem >> 0x1a000000-0x1a000fff irq 3 on nexus0 >> arge1: arge_attach: overriding MII mode to 'GMII' >> arge1: Generating random ethernet address. >> mii_attach_proxy: not attaching, no mdio device hint for arge1 >> arge1: finishing attachment, phymask 0000, proxy null >> arge1: bpf attached >> arge1: Ethernet address: c2:db:7b:5e:18:40 >> spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 >> spibus0: <SPI bus> on spi0 >> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 >> mx25l0: device type en25q32, size 4096K in 64 sectors of 64K, erase size > 64K >> ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 >> Device configuration finished. >> Timecounters tick every 1.000 msec >> lo0: bpf attached >> vlan: initialized, using hash tables with chaining >> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512 >> arswitch0port1: link state changed to DOWN >> arswitch0port2: link state changed to DOWN >> arswitch0port3: link state changed to DOWN >> arswitch0port4: link state changed to DOWN >> GEOM: new disk flash/spi0 >> Trying to mount root from cd9660:/dev/map/rootfs.uzip []... >> MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/bootloader" >> MAP: flash/spi0: 40000x3a0000, data=0x3a0000 "/dev/map/upgrade" >> MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step > 0x10000 >> MAP: flash/spi0: 40000x110000, data=0x110000 "/dev/map/kernel" >> MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step > 0x10000 >> MAP: flash/spi0: 150000x290000, data=0x290000 "/dev/map/rootfs" >> MAP: flash/spi0: 3f0000x10000, data=0x10000 "/dev/map/ART" >> MAP: No valid partition found at map/rootfs.uzip >> cd9660: RockRidge Extension >> Warning: no time-of-day clock registered, system time will not be set > accurately >> start_init: trying /sbin/init >> arswitch0: arswitch_miipollstat: port 1: port -> UP >> arswitch0port2: link state changed to UP >> gpio_pin_set_flags: Invalid argument >> kenv: unable to get HostName >> >> kern.coredump: 1 -> 0 >> net.inet.ip.forwarding: 0 -> 1 >> memory disk size = 10m >> MAP: No valid partition found at md0 >> random: unblocking device. >> MAP: No valid partition found at md0 >> Trap cause = 4 (address error (load or I-fetch) - kernel mode) >> panic: trap >> time = 30 >> KDB: enter: panic >> [ thread pid 34 tid 100038 ] >> Stopped at 0x4 >> db> where >> Tracing pid 34 tid 100038 td 0x806ef7c0 >> kdb_enter+0x54 (?,?,?,?) ra 800f3fac sp c5531758 sz 32 >> vpanic+0x158 (?,?,?,?) ra 800f3e4c sp c5531778 sz 48 >> panic+0x20 (?,?,?,?) ra 802d8e6c sp c55317a8 sz 32 >> trap+0x1014 (?,?,?,?) ra 802c6618 sp c55317c8 sz 152 >> MipsKernGenException+0xe4 (?,?,?,?) ra 0 sp c5531860 sz 0 >> --- exception, cause ffffffffc077a410 badvaddr 1d000000 --- >> ffs_balloc_ufs1+0x7ec (?,?,?,?) ra 80688100 sp c5531928 sz 400 >> 0x806880f8 (?,?,?,?) ra 0 sp c5531ab8 sz 0 >> db> ps >> pid ppid pgrp uid state wmesg wchan cmd >> 34 25 17 0 R+ CPU 0 mount >> 32 0 0 0 DL mdwait 0x80a1d000 [md0] >> 25 17 17 0 R+ sh >> 17 1 17 0 Ss+ wait 0xc017f380 sh >> 16 0 0 0 DL - 0x803cbd00 [soaiod4] >> 15 0 0 0 DL - 0x803cbd00 [soaiod3] >> 14 0 0 0 DL - 0x803cbd00 [soaiod2] >> 13 0 0 0 DL - 0x803cbd00 [soaiod1] >> 9 0 0 0 DL wrkwait 0x80646380 [map/rootfs.uzip] >> 8 0 0 0 DL - 0x802f7270 [schedcpu] >> 7 0 0 0 RL [syncer] >> 6 0 0 0 RL [vnlru] >> 5 0 0 0 RL (threaded) [bufdaemon] >> 100024 RunQ [bufdaemon] >> 100030 D - 0x80399400 [bufspacedaemon-0] >> 4 0 0 0 RL (threaded) [pagedaemon] >> 100023 RunQ [dom0] >> 100028 D launds 0x803d6ee4 [laundry: dom0] >> 100029 D umarcl 0x802827f8 [uma] >> 3 0 0 0 RL [rand_harvestq] >> 2 0 0 0 DL mx25jq 0x805d2c00 [task: mx25l flash] >> 12 0 0 0 RL (threaded) [geom] >> 100014 RunQ [g_event] >> 100015 D - 0x803a56cc [g_up] >> 100016 D - 0x803a56d0 [g_down] >> 11 0 0 0 RL (threaded) [intr] >> 100006 I [swi5: fast taskq] >> 100008 I [swi6: task queue] >> 100009 I [swi6: Giant taskq] >> 100011 I [swi3: vm] >> 100012 I [swi1: netisr 0] >> 100013 RunQ [swi4: clock (0)] >> 100017 I [swi0: uart] >> 100018 I [apb intr2: gpio0] >> 100019 I [int2 arge0] >> 100020 I [int3 arge1] >> 10 0 0 0 RL [idle] >> 1 0 1 0 SLs wait 0xc0165c00 [init] >> 0 0 0 0 DLs (threaded) [kernel] >> 100000 D swapin 0x803a5b78 [swapper] >> 100003 D - 0x8058be00 [softirq_0] >> 100004 D - 0x8058bd00 [thread taskq] >> 100005 D - 0x8058bc00 [inm_free taskq] >> 100007 D - 0x8058b900 [kqueue_ctx taskq] >> 100010 D - 0x8058b400 [aiod_kick taskq] >> db> >> >> >> >> >> >> >> >> ----- Original Message ----- >>> From: Mori Hiroki <yamori813@yahoo.co.jp> >>> To: "freebsd-mips@freebsd.org" > <freebsd-mips@freebsd.org> >>> Date: 2021/6/5, Sat 08:57 >>> Subject: hang up at mount on releng/13 >>> >>> Hi >>> I try to boot releng/13 on AR9341. >>> I have hung up on mount. >>> If you have advice, please let me know. >>> Thanks >>> Hiroki Mori >>> >>> ---<<BOOT>>--- >>> ar934x_chip_init_gmac: gmac_cfg=0x000001c0 >>> ar934x_configure_gmac: ETH_CFG=0x00003000 >>> KDB: debugger backends: ddb >>> KDB: current backend: ddb >>> Copyright (c) 1992-2021 The FreeBSD Project. >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 >>> The Regents of the University of California. All rights > reserved. >>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>> FreeBSD 13.0-RELEASE-p2 #1 releng/13.0-b74cdf1ec: Sat Jun 5 08:41:04 > JST >> 2021 >>> >> > hiroki@zrouter:/usr/home/hiroki/obj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/src/mips.mips/sys/IOData_WN-G300R > >> mips >>> FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git >> llvmorg-11.0.1-0-g43ff75f2c3fe) >>> Preloaded elf kernel "kernel" at 0x803cf390. >>> CPU: MIPS Technologies (Atheros AR9341 rev 1) processor v76.151 >>> MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg > sizes) >>> L1 i-cache: 4 ways of 512 sets, 32 bytes per line >>> L1 d-cache: 4 ways of 256 sets, 32 bytes per line >>> L2 cache: disabled >>> Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> >>> Config2=0x80001000 >>> Config3=0x2c20<ULRI> >>> Config7=0x80000800<WII> >>> real memory = 33554432 (32768K bytes) >>> Physical memory chunk(s): >>> 0x00462000 - 0x01f83fff, 28450816 bytes (6946 pages) >>> avail memory = 27947008 (26MB) >>> random: no preloaded entropy cache >>> arc4random: WARNING: initial seeding bypassed the cryptographic random >> device because it was not yet seeded and the knob >> 'bypass_before_seeding' was enabled. >>> hostuuid: using 00000000-0000-0000-0000-000000000000 >>> random: entropy device external interface >>> mem: <memory> >>> null: <full device, null device, zero device> >>> nexus0: <MIPS32 root nexus> >>> argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO >> controller> at mem 0x19000000-0x19000fff on nexus0 >>> mdio0: <MDIO> on argemdio0 >>> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 >>> clock0: <Generic MIPS32 ticker> on nexus0 >>> Timecounter "MIPS32" frequency 267500000 Hz quality 800 >>> Event timer "MIPS32" frequency 267500000 Hz quality 800 >>> argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO >> controller> at mem 0x1a000000-0x1a000fff on nexus0 >>> mdio1: <MDIO> on argemdio1 >>> mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1 >>> arswitch0: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on > mdio1 >>> arswitch0: ar9340_hw_global_setup: GMII >>> arswitch0: ar9340_hw_global_setup: PHY4 - CPU >>> miibus0: <MII bus> on arswitch0 >>> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 >>> ukphy0: OUI 0x00c82e, model 0x0004, rev. 2 >>> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, >> 1000baseT-FDX, 1000baseT-FDX-master, auto >>> miibus1: <MII bus> on arswitch0 >>> ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 >>> ukphy1: OUI 0x00c82e, model 0x0004, rev. 2 >>> ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, >> 1000baseT-FDX, 1000baseT-FDX-master, auto >>> miibus2: <MII bus> on arswitch0 >>> ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 >>> ukphy2: OUI 0x00c82e, model 0x0004, rev. 2 >>> ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, >> 1000baseT-FDX, 1000baseT-FDX-master, auto >>> miibus3: <MII bus> on arswitch0 >>> ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 >>> ukphy3: OUI 0x00c82e, model 0x0004, rev. 2 >>> ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, >> 1000baseT-FDX, 1000baseT-FDX-master, auto >>> etherswitch0: <Switch controller> on arswitch0 >>> mdio2: <MDIO> on arswitch0 >>> mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2 >>> apb0 at irq 4 on nexus0 >>> uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 > on >> apb0 >>> uart0: console (115200,n,8,1) >>> uart0: fast interrupt >>> uart0: PPS capture mode: DCD >>> gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff > irq 2 >> on apb0 >>> gpio0: [GIANT-LOCKED] >>> gpio0: function_set: 0x0 >>> gpio0: function_clear: 0x0 >>> gpio0: gpio pinmask=0x7da000 >>> gpiobus0: <GPIO bus> on gpio0 >>> gpioled0: <GPIO led> at pin 15 on gpiobus0 >>> gpioled1: <GPIO led> at pin 13 on gpiobus0 >>> gpioled2: <GPIO led> at pin 18 on gpiobus0 >>> gpioc0: <GPIO controller> on gpio0 >>> arge0: <Atheros AR71xx built-in ethernet interface> at mem >> 0x19000000-0x19000fff irq 2 on nexus0 >>> arge0: Generating random ethernet address. >>> miiproxy0: <MII/MDIO proxy, MII side> on arge0 >>> miiproxy0: attached to target mdio2 >>> arge0: finishing attachment, phymask 0001, proxy set >>> miibus4: <MII bus> on miiproxy0 >>> ukphy4: <Generic IEEE 802.3u media interface> PHY 0 on miibus4 >>> ukphy4: OUI 0x00c82e, model 0x0004, rev. 2 >>> ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, >> 1000baseT-FDX, 1000baseT-FDX-master, auto >>> arge0: bpf attached >>> arge0: Ethernet address: 58:9c:fc:10:46:76 >>> arge1: <Atheros AR71xx built-in ethernet interface> at mem >> 0x1a000000-0x1a000fff irq 3 on nexus0 >>> arge1: arge_attach: overriding MII mode to 'GMII' >>> arge1: Generating random ethernet address. >>> mii_attach_proxy: not attaching, no mdio device hint for arge1 >>> arge1: finishing attachment, phymask 0000, proxy null >>> arge1: bpf attached >>> arge1: Ethernet address: 58:9c:fc:10:ff:83 >>> spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 >>> spibus0: <SPI bus> on spi0 >>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 >>> mx25l0: device type en25q32, size 4096K in 64 sectors of 64K, erase > size 64K >>> ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 >>> Device configuration finished. >>> Timecounters tick every 1.000 msec >>> lo0: bpf attached >>> vlan: initialized, using hash tables with chaining >>> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512 >>> arswitch0port1: link state changed to DOWN >>> arswitch0port2: link state changed to DOWN >>> arswitch0port3: link state changed to DOWN >>> arswitch0port4: link state changed to DOWN >>> GEOM: new disk flash/spi0 >>> Trying to mount root from cd9660:/dev/map/rootfs.uzip []... >>> MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/bootloader" >>> MAP: flash/spi0: 40000x3a0000, data=0x3a0000 > "/dev/map/upgrade" >>> MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, > step >> 0x10000 >>> MAP: flash/spi0: 40000x100000, data=0x100000 > "/dev/map/kernel" >>> MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, > step >> 0x10000 >>> MAP: flash/spi0: 140000x2a0000, data=0x2a0000 > "/dev/map/rootfs" >>> MAP: flash/spi0: 3f0000x10000, data=0x10000 "/dev/map/ART" >>> MAP: No valid partition found at map/rootfs.uzip >>> cd9660: RockRidge Extension >>> Warning: no time-of-day clock registered, system time will not be set >> accurately >>> start_init: trying /sbin/init >>> arswitch0: arswitch_miipollstat: port 0: port -> UP >>> arswitch0port1: link state changed to UP >>> # /sbin/mdconfig -a -t malloc -s 2m >>> MAP: No valid partition found at md0 >>> md0 >>> # newfs -b 4096 -f 512 -n -o space /dev/md0 >>> random: unblocking device. >>> /dev/md0: 2.0MB (4096 sectors) block size 4096, fragment size 512 >>> using 4 cylinder groups of 0.50MB, 129 blks, 528 inodes. >>> super-block backups (for fsck_ffs -b #) at: >>> 144, 1176, 2208, 3240 >>> MAP: No valid partition found at md0 >>> # mount /dev/md0 /mnt >>> ~KDB: enter: Break to debugger >>> [ thread pid 27 tid 100037 ] >>> Stopped at 0x4 >>> db> ps >>> pid ppid pgrp uid state wmesg wchan cmd >>> 27 19 27 0 R+ CPU 0 mount >>> 25 0 0 0 DL mdwait 0x80b04000 [md0] >>> 19 1 19 0 Ss+ wait 0xc017f380 sh >>> 16 0 0 0 RL [soaiod4] >>> 15 0 0 0 RL [soaiod3] >>> 14 0 0 0 RL [soaiod2] >>> 13 0 0 0 RL [soaiod1] >>> 9 0 0 0 DL wrkwait 0x8063c380 [map/rootfs.uzip] >>> 8 0 0 0 RL [schedcpu] >>> 7 0 0 0 RL [syncer] >>> 6 0 0 0 RL [vnlru] >>> 5 0 0 0 RL (threaded) [bufdaemon] >>> 100024 RunQ [bufdaemon] >>> 100030 RunQ [bufspacedaemon-0] >>> 4 0 0 0 RL (threaded) [pagedaemon] >>> 100023 RunQ [dom0] >>> 100028 D launds 0x803cebe4 [laundry: dom0] >>> 100029 RunQ [uma] >>> 3 0 0 0 RL [rand_harvestq] >>> 2 0 0 0 DL mx25jq 0x805cbc00 [task: mx25l > flash] >>> 12 0 0 0 RL (threaded) [geom] >>> 100014 RunQ [g_event] >>> 100015 D - 0x8039d41c [g_up] >>> 100016 D - 0x8039d420 [g_down] >>> 11 0 0 0 RL (threaded) [intr] >>> 100006 I [swi5: fast taskq] >>> 100008 I [swi6: task queue] >>> 100009 I [swi6: Giant > taskq] >>> 100011 I [swi3: vm] >>> 100012 I [swi1: netisr 0] >>> 100013 RunQ [swi4: clock (0)] >>> 100017 RunQ [swi0: uart] >>> 100018 I [apb intr2: gpio0] >>> 100019 I [int2 arge0] >>> 100020 I [int3 arge1] >>> 10 0 0 0 RL [idle] >>> 1 0 1 0 SLs wait 0xc0165c00 [init] >>> 0 0 0 0 RLs (threaded) [kernel] >>> 100000 RunQ [swapper] >>> 100003 D - 0x80585e00 [softirq_0] >>> 100004 D - 0x80585d00 [thread taskq] >>> 100005 D - 0x80585c00 [inm_free taskq] >>> 100007 D - 0x80585900 [kqueue_ctx taskq] >>> 100010 D - 0x80585400 [aiod_kick taskq] >>> db> >>> >>> >> >