[Bug 270089] mpr: panic in mpr_complete_command during zpool import

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=270089

--- Comment #5 from Dan Kotowski <dan.kotowski@a9development.com> ---
# pciconf -l -BbcevV mpr0
mpr0@pci4:1:0:0:        class=0x010700 rev=0x02 hdr=0x00 vendor=0x1000
device=0x0097 subvendor=0x1000 subdevice=0x30e0
    vendor     = 'Broadcom / LSI'
    device     = 'SAS3008 PCI-Express Fusion-MPT SAS-3'
    class      = mass storage
    subclass   = SAS
    bar   [10] = type I/O Port, range 32, base 0, size 256, disabled
    bar   [14] = type Memory, range 64, base 0x40040000, size 65536, enabled
    bar   [1c] = type Memory, range 64, base 0x40000000, size 262144, enabled
    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 10[68] = PCI-Express 2 endpoint max data 128(4096) FLR RO NS
                 max read 512
                 link x8(x8) speed 8.0(8.0)
    cap 05[a8] = MSI supports 1 message, 64 bit, vector masks 
    cap 11[c0] = MSI-X supports 96 messages, enabled
                 Table in map 0x14[0xe000], PBA in map 0x14[0xf000]
    ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
    ecap 0019[1e0] = PCIe Sec 1 lane errors 0
    ecap 0004[1c0] = Power Budgeting 1
    ecap 0016[190] = DPA 1
    ecap 000e[148] = ARI 1

-- 
You are receiving this mail because:
You are the assignee for the bug.