FreeBSD-main-amd64-test - Build #29818 - Still Failing

From: <jenkins-admin_at_FreeBSD.org>
Date: Wed, 28 Oct 2026 00:50:54 UTC
FreeBSD-main-amd64-test - Build #29818 (d9d6e77965b32a8d2f9eeffd34e519a087e603e2) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/29818/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/29818/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/29818/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

d9d6e77965b32a8d2f9eeffd34e519a087e603e2 by siva:
tests/pf/igmp: fix attribute error with newer versions of scapy



The end of the build log:

[...truncated 5.98 MiB...]
bridge0: link state changed to DOWN
epair0a: link state changed to DOWN
carp: 1@epair0b: MASTER -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair0b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair0b: promiscuous mode disabled
epair1a: link state changed to DOWN
carp: 1@epair1b: BACKUP -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair1b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair1b: promiscuous mode disabled
passed  [6.077s]
sys/netinet/carp:vrrp_v6  ->  bridge0: Ethernet address: c2:b7:68:54:2f:c1
epair0a: Ethernet address: aa:dd:1d:2c:1c:44
epair0b: Ethernet address: 2a:9a:00:3e:a2:2f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: fa:60:ba:01:9b:92
epair1b: Ethernet address: 5e:4a:b6:9e:a1:55
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
bridge0: link state changed to UP
epair0b: promiscuous mode enabled
carp: 1@epair0b: INIT -> BACKUP (initialization complete)
epair1b: promiscuous mode enabled
carp: 1@epair1b: INIT -> BACKUP (initialization complete)
carp: 1@epair0b: BACKUP -> MASTER (master timed out)
epair1a: promiscuous mode disabled
epair0a: promiscuous mode disabled
bridge0: link state changed to DOWN
epair0a: link state changed to DOWN
carp: 1@epair0b: MASTER -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair0b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair0b: promiscuous mode disabled
epair1a: link state changed to DOWN
carp: 1@epair1b: BACKUP -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair1b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair1b: promiscuous mode disabled
passed  [6.068s]
sys/netinet/carp.py:TestCarp::test_source_mac  ->  broken: Test case body timed out  [300.020s]
sys/netinet/carp.py:TestCarp::test_source_mac_vrrp  ->  broken: Test case body timed out  [300.013s]
sys/netinet/divert:ipdivert_ip_input_local_success  ->  epair0a: Ethernet address: da:5f:8f:35:1a:28
epair0b: Ethernet address: b2:54:61:ed:03:11
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.640s]
sys/netinet/divert:ipdivert_ip_output_remote_success  ->  epair0a: Ethernet address: ba:0f:5f:9f:14:2c
epair0b: Ethernet address: 82:44:c4:08:8f:6c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.595s]
sys/netinet/fib_bind.py:TestFibBind6::test_RAW  ->  broken: Test case body timed out  [300.013s]
sys/netinet/fib_bind.py:TestFibBind6::test_TCP  ->  broken: Test case body timed out  [300.007s]
sys/netinet/fib_bind.py:TestFibBind6::test_UDP  ->  broken: Test case body timed out  [300.006s]
sys/netinet/fib_bind.py:TestFibBind::test_RAW  ->  broken: Test case body timed out  [300.006s]
sys/netinet/fib_bind.py:TestFibBind::test_TCP  ->  broken: Test case body timed out  [300.010s]
sys/netinet/fib_bind.py:TestFibBind::test_UDP  ->  broken: Test case body timed out  [300.004s]
sys/netinet/fibs:fibs_ifroutes1_success  ->  epair0a: Ethernet address: 58:9c:fc:10:f1:40
epair0b: Ethernet address: 58:9c:fc:10:7c:04
epair0a: link state changed to UP
epair0b: link state changed to UP
broken: Test case body timed out  [300.006s]
sys/netinet/fibs_multibind_test:multibind_different_user_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_different_user_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_different_user_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_different_user_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_dgram_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_dgram_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.007s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_stream_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.005s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_stream_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.005s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.005s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.007s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_dgram_socket_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.007s]
sys/netinet/fibs_multibind_test:per_fib_dgram_socket_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.007s]
sys/netinet/fibs_multibind_test:per_fib_listening_socket_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_listening_socket_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_raw_socket_raw  ->  skipped: FIB multibind not configured (net.inet.raw.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_raw_socket_raw6  ->  skipped: FIB multibind not configured (net.inet.raw.bind_all_fibs)  [0.007s]
sys/netinet/fibs_test:arpresolve_checks_interface_fib  ->  skipped: firewalls interfere with this test  [0.113s]
sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet  ->  tap0: Ethernet address: 8a:09:69:b7:a4:a8
tap1: Ethernet address: ae:76:e2:81:ae:c2
passed  [0.137s]
sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet_inet6  ->  tap0: Ethernet address: 56:69:21:92:f1:db
tap1: Ethernet address: 5e:15:7d:8b:87:34
passed  [0.134s]
sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib  ->  tap0: Ethernet address: 7a:78:2d:ed:1a:7f
passed  [0.118s]
sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib_inet6  ->  tap0: Ethernet address: 36:3c:cc:bd:97:dc
passed  [0.120s]
sys/netinet/fibs_test:same_ip_multiple_ifaces  ->  tap0: Ethernet address: ba:99:62:1c:0e:ae
tap1: Ethernet address: 0a:f5:78:30:10:0a
tap2: Ethernet address: e6:cd:cd:78:c1:f2
tap3: Ethernet address: 4e:44:6c:bc:dc:49
passed  [0.161s]
sys/netinet/fibs_test:same_ip_multiple_ifaces_fib0  ->  tap0: Ethernet address: 72:37:ed:af:98:40
tap1: Ethernet address: da:36:88:1e:fd:e3
expected_failure: The test results in an ifconfig error and thus spuriously fails: atf-check failed; see the output of the test for details  [0.115s]
sys/netinet/fibs_test:same_ip_multiple_ifaces_inet6  ->  tap0: Ethernet address: d6:95:48:04:f4:36
tap1: Ethernet address: ca:a1:72:95:b3:26
tap0: Ethernet address: 62:e3:4f:13:d2:c9
tap1: Ethernet address: 06:98:68:01:30:c5
passed  [0.165s]
sys/netinet/fibs_test:slaac_on_nondefault_fib6  ->  skipped: firewalls interfere with this test  [0.117s]
sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet  ->  tap0: Ethernet address: a6:59:0d:71:31:ac
tap1: Ethernet address: a2:7a:1a:0c:f8:c6
passed  [0.128s]
sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet_inet6  ->  tap0: Ethernet address: 56:19:30:0d:05:80
tap1: Ethernet address: 7a:1c:ca:11:fb:40
passed  [0.137s]
sys/netinet/fibs_test:udp_dontroute  ->  tap0: Ethernet address: 8a:d0:7d:b0:ba:b1
tap1: Ethernet address: 96:5c:39:d7:1a:ee
tap0: link state changed to UP
tap0: link state changed to DOWN
tap0: Ethernet address: e6:0d:b3:5e:09:64
tap1: Ethernet address: d6:16:a3:c9:d2:36
tap1: link state changed to UP
tap1: link state changed to DOWN
passed  [0.166s]
sys/netinet/fibs_test:udp_dontroute6  ->  tap0: Ethernet address: 52:48:6a:f5:d5:9f
tap1: Ethernet address: 16:fd:f1:eb:fe:9b
tap0: link state changed to UP
tap0: link state changed to DOWN
tap0: Ethernet address: ce:21:54:04:e7:a7
tap1: Ethernet address: d6:d5:27:91:c3:53
tap1: link state changed to UP
tap1: link state changed to DOWN
passed  [0.159s]
sys/netinet/forward:fwd_ip_blackhole  ->  epair0a: Ethernet address: 4a:b3:b1:9c:a0:85
epair0b: Ethernet address: 76:93:69:8c:7c:bb
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 26:76:77:00:dc:04
epair1b: Ethernet address: e6:53:80:6f:ea:a5
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [3.276s]
sys/netinet/forward:fwd_ip_icmp_gw_fast_success  ->  epair0a: Ethernet address: 0e:58:a3:01:a0:ee
epair0b: Ethernet address: e6:8c:4f:6f:94:89
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.587s]
sys/netinet/forward:fwd_ip_icmp_gw_slow_success  ->  epair0a: Ethernet address: aa:a0:be:eb:54:16
epair0b: Ethernet address: f6:33:3d:e8:02:34
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.589s]
sys/netinet/forward:fwd_ip_icmp_iface_fast_success  ->  epair0a: Ethernet address: b6:6f:3d:15:08:41
epair0b: Ethernet address: ee:a6:1b:1f:f0:9f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.620s]
sys/netinet/forward:fwd_ip_icmp_iface_slow_success  ->  epair0a: Ethernet address: aa:f7:8b:e1:8e:94
epair0b: Ethernet address: 86:0c:84:6d:c3:71
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.655s]
sys/netinet/igmp.py:TestIGMP::test_igmp2_join_leave  ->  broken: Test case body timed out  [300.018s]
sys/netinet/igmp.py:TestIGMP::test_igmp3_join_leave  ->  broken: Test case body timed out  [300.015s]
sys/netinet/ip6_v4mapped_test:tcp_v4mapped_bind  ->  passed  [0.008s]
sys/netinet/ip6_v4mapped_test:udp_v4mapped_sendto  ->  passed  [0.006s]
sys/netinet/ip_mroute.py:Test1RBasicINET6::test  ->  broken: Test case body timed out  [300.004s]
sys/netinet/ip_mroute.py:Test1RBasicINET::test  ->  skipped: Required program 'pimd' not found in PATH  [0.005s]
sys/netinet/ip_mroute.py:Test1RCrissCrossINET6::test  ->  broken: Test case body timed out  [300.004s]
sys/netinet/ip_mroute.py:Test1RCrissCrossINET6MissingRouter::test  ->  2026-10-28T00:49:48.557495+00:00 - auditd 1429 - - auditd_wait_for_events: SIGTERM
2026-10-28T00:49:48.558688+00:00 - auditd 1429 - - Auditing disabled
2026-10-28T00:49:48.563216+00:00 - auditd 1429 - - renamed /var/audit/20261027185254.not_terminated to /var/audit/20261027185254.20261028004948
2026-10-28T00:49:48.565642+00:00 - auditd 1429 - - Finished
2026-10-28T00:50:08.557468+00:00 - init 1 - - some processes would not die; ps axl advised
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 done
All buffers synced.
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-29818' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./run-kyua.sh
x ./disable-zfs-tests.sh
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins670505539572995729.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'd9d6e77965b32a8d2f9eeffd34e519a087e603e2', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../d9d6e77965b32a8d2f9eeffd34e519a087e603e2/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address