FreeBSD-stable-15-amd64-test - Build #67 - Still Failing
Date: Tue, 14 Oct 2025 16:54:14 UTC
FreeBSD-stable-15-amd64-test - Build #67 (583e976d6d09770a6299a19603d4f0dbaa562cac) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/67/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/67/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/67/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
583e976d6d09770a6299a19603d4f0dbaa562cac by vexeduxr:
libm: remainder: make sure x is zero
The end of the build log:
[...truncated 4.33 MiB...]
epair0b: Ethernet address: 66:0b:ad:f8:57:aa
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 5e:ec:5c:53:24:4d
epair1b: Ethernet address: 9a:a8:b7:14:71:2d
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.159s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 9e:d0:1b:3c:b9:7b
epair0b: Ethernet address: 46:02:30:bd:5b:87
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: de:f1:5b:45:35:07
epair1b: Ethernet address: 62:de:ab:a0:36:7c
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 9a:20:08:cd:61:04
epair0b: Ethernet address: 96:65:01:1d:62:a1
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 3a:fb:3d:d9:89:c0
epair1b: Ethernet address: 8a:f6:68:5d:a3:fb
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.149s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: a6:98:32:99:ff:e7
epair0b: Ethernet address: 02:63:39:a2:b9:be
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 92:4b:24:32:43:33
epair1b: Ethernet address: 72:62:0c:72:8e:0e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.150s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 36:eb:1a:d6:9b:a3
epair0b: Ethernet address: 3e:49:b4:8d:d5:62
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 06:ef:53:ef:64:57
epair1b: Ethernet address: 9a:d4:c6:27:1e:9b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.149s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 52:ae:01:58:c0:07
epair0b: Ethernet address: 52:c8:ff:7b:98:d7
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 56:08:3c:ae:66:f8
epair1b: Ethernet address: 52:a0:48:b4:c7:07
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: e2:f0:1d:1b:38:6d
epair0b: Ethernet address: 5e:89:7c:a7:c2:17
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: d2:c8:16:44:3b:cb
epair1b: Ethernet address: 8e:8e:46:f4:e8:5f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: 56:9c:2f:4c:ee:77
epair0b: Ethernet address: 0e:0d:a2:d2:3e:69
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 32:59:d0:c5:ee:bf
epair1b: Ethernet address: b6:6c:fb:74:e1:a4
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 3a:4e:8a:46:cd:41
epair0b: Ethernet address: 36:18:ba:3e:19:2a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 52:87:53:4e:66:ca
epair1b: Ethernet address: 32:0a:9d:d8:6d:b8
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: ba:c2:0f:cc:10:05
epair2b: Ethernet address: a6:da:2c:7b:84:d8
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.260s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: c6:ca:d0:24:bb:f7
epair0b: Ethernet address: 72:b8:f7:1e:71:7e
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 16:3e:c1:64:88:ce
epair1b: Ethernet address: be:75:87:f3:dd:62
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 5e:03:68:a7:b1:77
epair2b: Ethernet address: d2:10:05:e9:20:e3
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [6.265s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: e6:8d:52:c7:9f:70
epair0b: Ethernet address: 7e:0c:4a:9a:94:f7
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ce:0f:57:e1:85:dc
epair1b: Ethernet address: de:f7:9e:40:8d:a1
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: ba:b1:55:c4:49:23
epair2b: Ethernet address: 0a:e3:c3:be:73:0f
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f0e2
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff800974f5696 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 1
time = 1760460837
KDB: stack backtrace:
#0 0xffffffff80bc02ed at kdb_backtrace+0x5d
#1 0xffffffff80b736d6 at vpanic+0x136
#2 0xffffffff80b73593 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051d78 at calltrap+0x8
#5 0xffffffff80d84aa9 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc33e8 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b24 at ip6_input+0x484
#14 0xffffffff80cc0c48 at swi_net+0x128
#15 0xffffffff80b2d309 at ithread_loop+0x239
#16 0xffffffff80b2989b at fork_exit+0x7b
#17 0xffffffff81052d9e at fork_trampoline+0xe
Uptime: 1h44m3s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-67' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
x ./auto-shutdown
x ./run.sh
x ./disable-notyet-tests.sh
x ./disable-zfs-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins13874338715467701594.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '583e976d6d09770a6299a19603d4f0dbaa562cac', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../583e976d6d09770a6299a19603d4f0dbaa562cac/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address