FreeBSD-stable-15-amd64-test - Build #66 - Still Failing
Date: Tue, 14 Oct 2025 05:32:47 UTC
FreeBSD-stable-15-amd64-test - Build #66 (e9010214e9bebbe6155c9f720551008a785b692c) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/66/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/66/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/66/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
e9010214e9bebbe6155c9f720551008a785b692c by cperciva:
EC2: Fix additional files on small+builder AMIs
The end of the build log:
[...truncated 4.33 MiB...]
epair0b: Ethernet address: e2:39:c8:e0:96:43
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 76:2c:b9:67:4b:0b
epair1b: Ethernet address: 1a:43:9e:57:7d:70
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.155s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 6a:67:fa:47:7e:b0
epair0b: Ethernet address: f6:05:5b:43:73:cf
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1e:cf:fa:20:fd:96
epair1b: Ethernet address: 2a:30:ba:98:a4:c5
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.155s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 32:dd:4e:73:b1:f0
epair0b: Ethernet address: 1a:fa:98:23:d9:7e
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4e:3c:ac:f9:a6:0e
epair1b: Ethernet address: 12:68:bc:ac:75:a1
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.136s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 52:0f:79:71:a5:f3
epair0b: Ethernet address: 2e:bd:f6:76:e5:ed
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b2:64:14:a7:7a:49
epair1b: Ethernet address: 82:04:54:f3:db:ea
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.136s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: c2:46:dc:8e:cd:ba
epair0b: Ethernet address: c6:8b:18:37:26:e2
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9a:6f:08:da:27:55
epair1b: Ethernet address: 6e:51:15:a3:cb:5e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.134s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 56:ff:71:3e:31:2c
epair0b: Ethernet address: aa:85:3c:f3:0c:af
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6a:9a:7c:d9:e6:7d
epair1b: Ethernet address: 1a:83:04:d6:25:8f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.146s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: aa:41:26:7a:46:7f
epair0b: Ethernet address: e6:eb:c5:67:02:ae
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: d2:3c:e2:76:93:3e
epair1b: Ethernet address: 06:63:23:ec:c5:1b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.162s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: a6:83:af:f4:d3:a3
epair0b: Ethernet address: 42:ab:49:12:56:27
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 8a:d8:80:94:be:d2
epair1b: Ethernet address: 92:62:ab:b2:1f:d2
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.145s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 3e:91:84:0d:6d:fc
epair0b: Ethernet address: c6:0e:a8:43:64:2a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 2e:f6:89:c5:f7:65
epair1b: Ethernet address: 8e:03:2e:ae:14:5f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: be:61:c6:7c:de:82
epair2b: Ethernet address: d2:a7:80:35:40:e9
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.204s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 56:60:ab:6f:b7:1d
epair0b: Ethernet address: 0a:a0:4c:72:3a:50
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 76:8e:ca:5b:7e:48
epair1b: Ethernet address: be:99:3d:e4:28:16
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: a6:76:c8:6e:47:df
epair2b: Ethernet address: ce:2a:89:a4:fb:be
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [4.722s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 4e:7a:37:1d:8e:f1
epair0b: Ethernet address: b2:c1:b7:7f:7d:1a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ae:33:34:bb:73:79
epair1b: Ethernet address: aa:53:c5:00:89:83
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 8e:6e:a9:d6:3f:d2
epair2b: Ethernet address: 72:b0:d4:4b:3a:75
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f0e2
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff8014383f196 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 1
time = 1760419950
KDB: stack backtrace:
#0 0xffffffff80bc02ed at kdb_backtrace+0x5d
#1 0xffffffff80b736d6 at vpanic+0x136
#2 0xffffffff80b73593 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051d78 at calltrap+0x8
#5 0xffffffff80d84aa9 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc33e8 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b24 at ip6_input+0x484
#14 0xffffffff80cc0c48 at swi_net+0x128
#15 0xffffffff80b2d309 at ithread_loop+0x239
#16 0xffffffff80b2989b at fork_exit+0x7b
#17 0xffffffff81052d9e at fork_trampoline+0xe
Uptime: 1h36m17s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-66' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-zfs-tests.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./run-kyua.sh
x ./run.sh
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins1645946027516330181.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': 'e9010214e9bebbe6155c9f720551008a785b692c', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../e9010214e9bebbe6155c9f720551008a785b692c/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address