FreeBSD-main-amd64-test - Build #26935 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26936 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26934 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Thu, 09 Oct 2025 10:25:02 UTC
FreeBSD-main-amd64-test - Build #26935 (79042fd7ed4187d2a74e37618f6fd77f448ca353) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26935/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26935/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26935/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

170aac93479467334062813c1175a80200400b79 by markj:
tests/mac_portacl: restore sysctls after modification

79042fd7ed4187d2a74e37618f6fd77f448ca353 by markj:
tests/mac_ipacl: restore sysctls after modification



The end of the build log:

[...truncated 4.34 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 3e:f1:9a:90:fe:44
epair1b: Ethernet address: 9e:8b:02:c6:0c:e5
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.247s]
sys/netpfil/pf/nat64:tcp_in_floating  ->  epair0a: Ethernet address: 12:bb:f7:33:24:43
epair0b: Ethernet address: 9a:95:c0:fc:7b:eb
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6a:fb:01:3a:49:19
epair1b: Ethernet address: 7e:8f:66:d2:d3:4f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.257s]
sys/netpfil/pf/nat64:tcp_in_if_bound  ->  epair0a: Ethernet address: ee:89:bf:9f:15:e0
epair0b: Ethernet address: 2a:05:6e:5a:3f:02
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 5e:30:49:5f:c9:20
epair1b: Ethernet address: 56:6e:64:da:82:12
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.254s]
sys/netpfil/pf/nat64:tcp_out_floating  ->  epair0a: Ethernet address: d6:37:6c:23:a6:06
epair0b: Ethernet address: aa:7e:1b:65:71:cb
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4a:5b:ec:df:3d:19
epair1b: Ethernet address: b2:6d:b8:74:0f:da
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.235s]
sys/netpfil/pf/nat64:tcp_out_if_bound  ->  epair0a: Ethernet address: 5e:3b:e8:72:fc:55
epair0b: Ethernet address: 2e:1c:83:3e:1c:d4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 8a:09:11:9a:7e:17
epair1b: Ethernet address: 0e:33:62:0c:65:c2
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.236s]
sys/netpfil/pf/nat64:tos  ->  epair0a: Ethernet address: 1e:73:22:83:88:c6
epair0b: Ethernet address: 2e:cf:c9:4f:34:51
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 82:ea:10:6f:83:0d
epair1b: Ethernet address: ae:8f:31:f4:c2:07
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.235s]
sys/netpfil/pf/nat64:udp_in  ->  epair0a: Ethernet address: 0a:e9:bd:7d:eb:78
epair0b: Ethernet address: e2:7e:ef:de:e1:84
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9e:1c:f5:a2:19:91
epair1b: Ethernet address: 42:2c:e0:74:5f:0a
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.236s]
sys/netpfil/pf/nat64:udp_out  ->  epair0a: Ethernet address: a6:ae:33:18:1e:5e
epair0b: Ethernet address: ee:20:1f:ac:45:4a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ba:00:2a:fd:bd:80
epair1b: Ethernet address: 4a:05:cb:82:51:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.248s]
sys/netpfil/pf/nat64:v6_gateway  ->  epair0a: Ethernet address: 32:ab:af:74:cf:22
epair0b: Ethernet address: 02:41:ce:d0:11:0d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 8e:98:77:19:2a:b2
epair1b: Ethernet address: 2a:f7:51:3e:b3:cd
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 7a:1a:5a:b5:d0:43
epair2b: Ethernet address: da:16:d2:f4:63:10
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.334s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable  ->  epair0a: Ethernet address: d2:3d:d5:32:7b:45
epair0b: Ethernet address: 0a:6e:c1:b6:b8:4d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 26:ba:f7:78:50:2d
epair1b: Ethernet address: 3a:a7:54:d4:7d:b1
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 46:43:81:18:bd:6c
epair2b: Ethernet address: 06:50:42:42:8f:f9
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError  [5.142s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len  ->  epair0a: Ethernet address: 0e:53:c5:30:06:b9
epair0b: Ethernet address: 16:37:14:f2:26:98
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c2:7d:ae:d9:16:b6
epair1b: Ethernet address: 66:26:06:66:e8:5b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 6a:4f:4c:c1:67:ec
epair2b: Ethernet address: 86:24:2e:30:1a:ee
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 1
time = 1760005490
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008d1c25c0
curthread    = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb       = 0xfffff80004628cd0
fpcurthread  = none
idlethread   = 0xfffff8000460b000: tid 100004 "idle: cpu1"
self         = 0xffffffff82611000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82611384
rsp0         = 0xfffffe008baf1000
kcr3         = 0x800000000259b002
ucr3         = 0xffffffffffffffff
scr3         = 0x1b5c51df2
gs32p        = 0xffffffff82611404
ldt          = 0xffffffff82611444
tss          = 0xffffffff82611434
curvnet      = 0xfffff8000323a740
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h44m3s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26935' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./auto-shutdown
x ./disable-zfs-tests.sh
x ./run.sh
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins12845008567675445053.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '79042fd7ed4187d2a74e37618f6fd77f448ca353', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../79042fd7ed4187d2a74e37618f6fd77f448ca353/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address