FreeBSD-main-amd64-test - Build #26934 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26935 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26933 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Thu, 09 Oct 2025 08:38:33 UTC
FreeBSD-main-amd64-test - Build #26934 (e21e6e96b662dcbb2f0e37ab356c9dded62a586e) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26934/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26934/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26934/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

e21e6e96b662dcbb2f0e37ab356c9dded62a586e by dfr:
release: Avoid generating .pkgsave files in OCI images



The end of the build log:

[...truncated 4.34 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 26:4c:f2:9b:b1:5b
epair1b: Ethernet address: 26:f0:e9:e3:72:6a
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.245s]
sys/netpfil/pf/nat64:tcp_in_floating  ->  epair0a: Ethernet address: b6:d4:f6:22:11:bc
epair0b: Ethernet address: 06:24:c5:62:75:4d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: be:3e:4a:c6:67:f7
epair1b: Ethernet address: 32:fb:e1:68:e6:2d
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.255s]
sys/netpfil/pf/nat64:tcp_in_if_bound  ->  epair0a: Ethernet address: 8a:e6:f0:b6:7f:5c
epair0b: Ethernet address: 16:3c:c5:ff:c8:77
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 5e:f0:7d:9c:4e:dd
epair1b: Ethernet address: 7a:09:a6:f0:89:fd
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.234s]
sys/netpfil/pf/nat64:tcp_out_floating  ->  epair0a: Ethernet address: 4e:16:18:cf:70:ea
epair0b: Ethernet address: ba:af:cd:bd:8d:b8
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 0e:0e:74:fb:4c:f2
epair1b: Ethernet address: 82:8d:09:2b:21:18
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.235s]
sys/netpfil/pf/nat64:tcp_out_if_bound  ->  epair0a: Ethernet address: ca:73:e0:ce:08:ac
epair0b: Ethernet address: 46:52:82:df:81:99
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 82:1a:e4:4c:47:fd
epair1b: Ethernet address: ae:ee:13:30:87:69
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.255s]
sys/netpfil/pf/nat64:tos  ->  epair0a: Ethernet address: e2:9b:3c:7c:1d:d2
epair0b: Ethernet address: f2:e4:97:21:09:0c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: e6:3c:99:55:65:93
epair1b: Ethernet address: da:c0:65:6d:59:a3
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.266s]
sys/netpfil/pf/nat64:udp_in  ->  epair0a: Ethernet address: b6:79:ca:80:91:19
epair0b: Ethernet address: b2:7d:c2:90:b5:11
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 66:f4:c3:43:ca:ff
epair1b: Ethernet address: d2:d0:e0:c9:17:1b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.245s]
sys/netpfil/pf/nat64:udp_out  ->  epair0a: Ethernet address: a2:02:87:6d:46:14
epair0b: Ethernet address: 86:46:75:97:58:88
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 2a:f0:0b:d0:91:27
epair1b: Ethernet address: 56:2d:e9:ec:c5:9b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.255s]
sys/netpfil/pf/nat64:v6_gateway  ->  epair0a: Ethernet address: e6:cb:3c:8d:77:d4
epair0b: Ethernet address: c6:39:6d:57:b7:3e
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 92:9b:29:9e:5b:9b
epair1b: Ethernet address: be:be:4c:ef:00:2e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: a6:09:86:04:90:ae
epair2b: Ethernet address: aa:08:9a:29:64:4b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.356s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable  ->  epair0a: Ethernet address: 22:82:b2:a7:54:09
epair0b: Ethernet address: b2:ba:c8:57:2c:57
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 36:c2:9e:ba:a0:d2
epair1b: Ethernet address: 92:3b:42:27:77:cf
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 32:97:5b:5a:8f:32
epair2b: Ethernet address: 5e:5f:08:15:4a:f2
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError  [5.148s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len  ->  epair0a: Ethernet address: aa:05:76:92:5b:e8
epair0b: Ethernet address: 8e:83:4d:ce:99:5f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: be:99:61:91:51:d8
epair1b: Ethernet address: 7e:33:06:6a:ae:bd
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: ea:19:4d:7a:86:a6
epair2b: Ethernet address: 82:ed:e9:6e:61:ca
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 1
time = 1759999103
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008d1c25c0
curthread    = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb       = 0xfffff80004628cd0
fpcurthread  = none
idlethread   = 0xfffff8000460b000: tid 100004 "idle: cpu1"
self         = 0xffffffff82611000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82611384
rsp0         = 0xfffffe008baf1000
kcr3         = 0x800000000259b002
ucr3         = 0xffffffffffffffff
scr3         = 0x1dc6c3ee0
gs32p        = 0xffffffff82611404
ldt          = 0xffffffff82611444
tss          = 0xffffffff82611434
curvnet      = 0xfffff8007a658800
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h38m54s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26934' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
x ./disable-dtrace-tests.sh
x ./run.sh
x ./run-kyua.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins7585595752879575125.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'e21e6e96b662dcbb2f0e37ab356c9dded62a586e', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../e21e6e96b662dcbb2f0e37ab356c9dded62a586e/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address