FreeBSD-main-amd64-test - Build #26927 - Still Failing
Date: Wed, 08 Oct 2025 21:33:46 UTC
FreeBSD-main-amd64-test - Build #26927 (1f76551e1a5e98673f31043d11366ca41d4f56fe) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26927/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26927/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26927/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
1f76551e1a5e98673f31043d11366ca41d4f56fe by adrian:
net80211: document some of the crypto/key functions
The end of the build log:
[...truncated 4.40 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 7a:64:ee:17:9c:64
epair1b: Ethernet address: 46:7f:cb:ef:a7:50
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.256s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 2e:57:c3:92:c6:c5
epair0b: Ethernet address: fa:9c:03:93:31:b4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 5a:37:c8:b2:76:2b
epair1b: Ethernet address: fa:6a:9a:5e:86:b5
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.246s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 16:10:e9:4c:b6:a8
epair0b: Ethernet address: e2:4a:ec:2e:a9:ee
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1e:42:1d:78:b6:d5
epair1b: Ethernet address: 3a:85:1e:a0:52:f7
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.248s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 7a:22:02:07:23:cd
epair0b: Ethernet address: 86:73:86:dd:8d:7d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1e:61:b5:02:d6:3f
epair1b: Ethernet address: b2:a6:01:5c:05:61
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.237s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 1a:38:f3:f0:8b:7b
epair0b: Ethernet address: 1a:d4:02:42:35:be
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 62:98:1c:64:62:a4
epair1b: Ethernet address: 82:80:20:fc:6d:19
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.258s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 9e:f0:1e:70:00:29
epair0b: Ethernet address: 12:b0:ae:62:60:bd
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 42:d1:3d:2a:67:43
epair1b: Ethernet address: 3e:fd:ba:23:5a:82
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.249s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 82:d4:11:ec:f6:18
epair0b: Ethernet address: 5a:8a:e6:fc:40:2b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 56:b7:0b:6d:e2:09
epair1b: Ethernet address: 7a:dc:7e:09:a5:53
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.238s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: 4e:cb:38:bd:39:c5
epair0b: Ethernet address: 0e:61:72:01:84:2c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ba:48:79:2a:7f:a2
epair1b: Ethernet address: 12:f3:86:5b:31:50
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.255s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 4e:8e:c7:19:43:ef
epair0b: Ethernet address: 7e:37:3e:85:2c:36
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: e2:cb:40:77:43:3c
epair1b: Ethernet address: 56:7a:71:5a:16:1d
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 32:17:4f:7b:16:eb
epair2b: Ethernet address: 4e:1f:76:87:8f:04
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.346s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 86:9f:f1:04:94:b4
epair0b: Ethernet address: 7e:ef:9a:cd:ad:70
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 56:d5:ee:58:12:20
epair1b: Ethernet address: c6:0a:14:03:1e:c1
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 92:a6:0d:91:14:24
epair2b: Ethernet address: 5a:d1:8f:49:22:a6
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.025s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 66:12:b5:88:50:94
epair0b: Ethernet address: 56:b5:a7:cf:6d:4c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c2:36:9e:5f:f7:9e
epair1b: Ethernet address: d2:5b:75:31:dd:18
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: ea:19:0a:7e:c9:ca
epair2b: Ethernet address: 1e:35:e3:07:e5:00
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 0
time = 1759959224
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at kdb_enter+0x33: movq $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 0
dynamic pcpu = 0xa075c0
curthread = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb = 0xfffff80004628cd0
fpcurthread = none
idlethread = 0xfffff8000460b780: tid 100003 "idle: cpu0"
self = 0xffffffff82610000
curpmap = 0xffffffff81d9f520
tssp = 0xffffffff82610384
rsp0 = 0xfffffe008baf1000
kcr3 = 0x800000000259b002
ucr3 = 0xffffffffffffffff
scr3 = 0x1bb37288d
gs32p = 0xffffffff82610404
ldt = 0xffffffff82610444
tss = 0xffffffff82610434
curvnet = 0xfffff8000323b800
spin locks held:
db:0:kdb.enter.panic> reset
Uptime: 1h46m28s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26927' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./auto-shutdown
x ./disable-notyet-tests.sh
x ./run.sh
x ./disable-zfs-tests.sh
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins15747877433950139085.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '1f76551e1a5e98673f31043d11366ca41d4f56fe', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../1f76551e1a5e98673f31043d11366ca41d4f56fe/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address