FreeBSD-main-amd64-test - Build #26926 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26927 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26925 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Wed, 08 Oct 2025 19:46:20 UTC
FreeBSD-main-amd64-test - Build #26926 (86becbd8c1ce4393f4e35a9fa6b0e8308f500396) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26926/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26926/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26926/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

86becbd8c1ce4393f4e35a9fa6b0e8308f500396 by imp:
Revert "cam/iosched: Initialize max_lat"



The end of the build log:

[...truncated 3.91 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 0a:25:20:4e:bf:84
epair1b: Ethernet address: 9e:4c:e5:5f:a5:b7
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.311s]
sys/netpfil/pf/nat64:tcp_in_floating  ->  epair0a: Ethernet address: da:b5:c9:bd:7a:61
epair0b: Ethernet address: 16:aa:de:e6:1e:79
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: be:53:b8:03:ef:bf
epair1b: Ethernet address: 0e:c4:0e:12:57:99
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.239s]
sys/netpfil/pf/nat64:tcp_in_if_bound  ->  epair0a: Ethernet address: 7e:ec:84:f4:f5:1c
epair0b: Ethernet address: 96:1d:01:23:e5:f8
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4e:84:75:9f:66:5a
epair1b: Ethernet address: 7a:b4:19:90:d7:a7
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.228s]
sys/netpfil/pf/nat64:tcp_out_floating  ->  epair0a: Ethernet address: fa:ab:19:db:68:1a
epair0b: Ethernet address: ae:50:85:10:54:7a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 0e:03:b2:c9:53:e7
epair1b: Ethernet address: 3e:9f:4e:b4:fc:75
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.238s]
sys/netpfil/pf/nat64:tcp_out_if_bound  ->  epair0a: Ethernet address: 2e:fd:e6:0f:74:78
epair0b: Ethernet address: 9a:97:aa:51:f9:08
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 2a:84:e6:72:b9:91
epair1b: Ethernet address: 96:2f:fc:d1:ad:38
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.237s]
sys/netpfil/pf/nat64:tos  ->  epair0a: Ethernet address: e2:8d:ca:4b:76:51
epair0b: Ethernet address: f6:d0:93:c6:6c:42
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 0a:75:28:8f:68:50
epair1b: Ethernet address: be:c8:11:0c:2f:ce
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.239s]
sys/netpfil/pf/nat64:udp_in  ->  epair0a: Ethernet address: 5a:f3:32:f5:4d:33
epair0b: Ethernet address: 56:15:71:91:42:e3
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6e:d8:27:a0:49:45
epair1b: Ethernet address: d6:d8:75:c1:f4:e7
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.238s]
sys/netpfil/pf/nat64:udp_out  ->  epair0a: Ethernet address: 56:81:b9:dd:03:26
epair0b: Ethernet address: ce:51:e5:e9:c3:22
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: fa:86:c4:97:99:9b
epair1b: Ethernet address: e6:5f:bc:f1:17:ab
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.239s]
sys/netpfil/pf/nat64:v6_gateway  ->  epair0a: Ethernet address: 06:35:a8:39:35:c2
epair0b: Ethernet address: d2:e6:ef:18:48:2a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 72:54:dc:cb:96:ef
epair1b: Ethernet address: 0e:06:bd:58:a2:71
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 2e:22:de:a0:21:0d
epair2b: Ethernet address: 56:77:fc:91:f5:22
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.340s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable  ->  epair0a: Ethernet address: 6e:56:36:ba:32:b0
epair0b: Ethernet address: d6:00:49:3e:75:c1
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: de:ba:8b:8b:0e:21
epair1b: Ethernet address: e2:15:f4:c6:a8:9c
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: f2:77:99:75:51:8f
epair2b: Ethernet address: 42:c3:70:0e:b4:75
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError  [5.065s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len  ->  epair0a: Ethernet address: 06:b4:ef:1e:42:76
epair0b: Ethernet address: b6:cf:fa:b3:c3:49
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4e:a4:74:20:6c:d2
epair1b: Ethernet address: 42:dd:b6:09:0a:9e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 0a:76:c8:bf:6c:66
epair2b: Ethernet address: 9a:14:e9:c2:55:07
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 1
time = 1759952779
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008d1c25c0
curthread    = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb       = 0xfffff80004628cd0
fpcurthread  = none
idlethread   = 0xfffff8000460b000: tid 100004 "idle: cpu1"
self         = 0xffffffff82611000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82611384
rsp0         = 0xfffffe008baf1000
kcr3         = 0x800000000259b002
ucr3         = 0xffffffffffffffff
scr3         = 0x11873ed02
gs32p        = 0xffffffff82611404
ldt          = 0xffffffff82611444
tss          = 0xffffffff82611434
curvnet      = 0xfffff80145a79600
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h18m6s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26926' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
x ./disable-dtrace-tests.sh
x ./run.sh
x ./disable-notyet-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins13592016313009707805.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '86becbd8c1ce4393f4e35a9fa6b0e8308f500396', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../86becbd8c1ce4393f4e35a9fa6b0e8308f500396/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address