FreeBSD-main-amd64-test - Build #26922 - Still Failing
Date: Wed, 08 Oct 2025 13:17:42 UTC
FreeBSD-main-amd64-test - Build #26922 (d801cc2d8542854a5dee9bfb25a15af6fa1dafad) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26922/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26922/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26922/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
d801cc2d8542854a5dee9bfb25a15af6fa1dafad by tuexen:
sockstat: support reporting of BBLog state
The end of the build log:
[...truncated 3.95 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: c6:79:4e:f2:63:fc
epair1b: Ethernet address: aa:5b:db:6b:9d:96
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.284s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: f2:f9:7b:2c:6d:f9
epair0b: Ethernet address: c6:b7:c8:d7:07:e1
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 22:fd:0a:22:2a:49
epair1b: Ethernet address: ba:52:56:0d:4f:44
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.250s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 56:43:71:35:d3:20
epair0b: Ethernet address: 9e:d0:87:5d:b8:b4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:45:66:9a:5d:b8
epair1b: Ethernet address: a6:26:ab:9d:fc:77
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.246s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 26:21:e3:6c:71:00
epair0b: Ethernet address: c2:57:dc:89:08:83
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ea:08:4d:5f:99:e1
epair1b: Ethernet address: b2:45:35:1b:ec:e2
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.269s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 8e:9b:28:42:09:a0
epair0b: Ethernet address: da:d4:2f:10:7f:9d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ee:86:01:81:fd:d2
epair1b: Ethernet address: 0e:a0:d3:f3:36:13
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.268s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 86:e4:52:ee:51:66
epair0b: Ethernet address: a6:15:a7:86:d1:8f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 92:17:6c:ff:73:ae
epair1b: Ethernet address: fa:2e:e3:2c:f7:3e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.238s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: aa:e3:a9:9c:bc:ab
epair0b: Ethernet address: 66:6c:72:97:eb:09
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 8e:71:42:ff:55:7c
epair1b: Ethernet address: b2:1e:eb:ca:53:b8
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.238s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: a6:3d:49:aa:23:a3
epair0b: Ethernet address: 5a:67:38:af:4a:4c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 7a:d2:74:ed:55:98
epair1b: Ethernet address: 06:2c:1c:93:46:24
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.236s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 42:18:62:6c:9b:c6
epair0b: Ethernet address: ba:56:89:ee:0d:12
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 3e:91:c8:70:2b:a5
epair1b: Ethernet address: 9a:99:3b:99:a8:09
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 12:a6:3d:f0:ff:ba
epair2b: Ethernet address: 3e:63:1e:26:e6:51
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.428s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 5e:35:3e:ae:3e:94
epair0b: Ethernet address: 8a:30:e7:bd:6d:80
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 5a:0f:84:ee:c7:89
epair1b: Ethernet address: d6:d1:05:f1:d4:40
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: fa:07:e6:08:b0:b7
epair2b: Ethernet address: 22:69:83:39:5e:69
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.165s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: ce:01:8c:cf:4a:61
epair0b: Ethernet address: 6a:9e:17:cf:63:80
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ca:4f:44:1b:71:5e
epair1b: Ethernet address: fe:8d:68:07:1f:ca
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:35:33:e1:96:f1
epair2b: Ethernet address: 9e:f3:c4:f6:50:f0
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 1
time = 1759929461
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at kdb_enter+0x33: movq $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 1
dynamic pcpu = 0xfffffe008d1c25c0
curthread = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb = 0xfffff80004628cd0
fpcurthread = none
idlethread = 0xfffff8000460b000: tid 100004 "idle: cpu1"
self = 0xffffffff82611000
curpmap = 0xffffffff81d9f520
tssp = 0xffffffff82611384
rsp0 = 0xfffffe008baf1000
kcr3 = 0x800000000259b002
ucr3 = 0xffffffffffffffff
scr3 = 0x21fb829e8
gs32p = 0xffffffff82611404
ldt = 0xffffffff82611444
tss = 0xffffffff82611434
curvnet = 0xfffff80144e51900
spin locks held:
db:0:kdb.enter.panic> reset
Uptime: 1h20m16s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26922' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./run.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins11853654408432275294.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'd801cc2d8542854a5dee9bfb25a15af6fa1dafad', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../d801cc2d8542854a5dee9bfb25a15af6fa1dafad/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address