FreeBSD-main-amd64-test - Build #26921 - Failure
Date: Wed, 08 Oct 2025 11:56:12 UTC
FreeBSD-main-amd64-test - Build #26921 (1c2fc62e4a9689961169be7836038acd5f757be1) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26921/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26921/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26921/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
1c2fc62e4a9689961169be7836038acd5f757be1 by jtl:
x86: Add a way to inject artificial MCA events for testing
The end of the build log:
[...truncated 3.97 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: a6:a8:4a:d4:ab:8f
epair1b: Ethernet address: ca:4e:fa:f8:6a:a3
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.238s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: aa:d4:fd:04:79:dc
epair0b: Ethernet address: 96:d6:0b:2a:07:b6
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ee:12:1c:b0:60:10
epair1b: Ethernet address: b6:38:98:d3:14:66
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.257s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: d2:20:4d:cb:a2:de
epair0b: Ethernet address: b2:77:fe:5a:7b:f2
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 92:c0:84:38:34:b8
epair1b: Ethernet address: 4a:7a:c6:7b:fc:19
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.237s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 32:86:71:46:35:56
epair0b: Ethernet address: b6:8a:43:89:c0:af
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: aa:5e:b4:dc:0a:92
epair1b: Ethernet address: 22:0a:ee:4c:25:b5
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.256s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 5e:65:85:96:7b:74
epair0b: Ethernet address: 6e:ef:42:3a:fb:cc
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 62:f2:09:d8:4e:89
epair1b: Ethernet address: 92:79:64:4b:35:e9
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.249s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 3a:d5:10:df:89:cd
epair0b: Ethernet address: 02:83:da:07:49:7c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: fa:62:ed:87:41:94
epair1b: Ethernet address: be:ba:d0:ba:b8:07
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.237s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 02:b3:76:da:69:9d
epair0b: Ethernet address: ea:1e:e0:a9:01:85
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 06:6c:8c:52:cc:b6
epair1b: Ethernet address: 5a:40:19:cc:d8:24
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.236s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: da:76:ca:96:1c:65
epair0b: Ethernet address: 82:92:12:ad:7f:2b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 2a:df:7b:0e:4d:9c
epair1b: Ethernet address: 8a:14:7d:84:6f:ed
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.239s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 62:ef:77:0e:c2:f9
epair0b: Ethernet address: c6:b6:8d:e2:a9:a0
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: d2:e7:86:ab:05:7f
epair1b: Ethernet address: fa:28:b5:be:10:71
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:63:59:50:59:c9
epair2b: Ethernet address: be:ac:a0:08:1c:18
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.370s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 32:ff:c2:a9:fc:2c
epair0b: Ethernet address: 5a:ec:3c:a0:8a:88
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1e:7d:2f:57:ae:0b
epair1b: Ethernet address: 06:3c:5e:06:67:dc
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: ea:8d:b9:ed:da:9e
epair2b: Ethernet address: fa:a8:4f:94:c2:28
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [4.962s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 66:45:88:a7:11:80
epair0b: Ethernet address: e6:a0:7e:76:36:d9
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c2:48:34:bf:0f:76
epair1b: Ethernet address: c6:17:4b:85:02:02
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 6e:32:8f:f7:09:74
epair2b: Ethernet address: 0a:fd:da:63:9c:fc
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 0
time = 1759924571
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at kdb_enter+0x33: movq $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 0
dynamic pcpu = 0xa075c0
curthread = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb = 0xfffff80004628cd0
fpcurthread = none
idlethread = 0xfffff8000460b780: tid 100003 "idle: cpu0"
self = 0xffffffff82610000
curpmap = 0xffffffff81d9f520
tssp = 0xffffffff82610384
rsp0 = 0xfffffe008baf1000
kcr3 = 0x800000000259b002
ucr3 = 0xffffffffffffffff
scr3 = 0x155547bc2
gs32p = 0xffffffff82610404
ldt = 0xffffffff82610444
tss = 0xffffffff82610434
curvnet = 0xfffff80003238840
spin locks held:
db:0:kdb.enter.panic> reset
Uptime: 1h23m52s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26921' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./disable-zfs-tests.sh
x ./run.sh
x ./auto-shutdown
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins17106774015355144655.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '1c2fc62e4a9689961169be7836038acd5f757be1', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../1c2fc62e4a9689961169be7836038acd5f757be1/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address