FreeBSD-main-amd64-test - Build #25140 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #25141 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #25139 - Still Unstable"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Sat, 20 Apr 2024 23:12:29 UTC
FreeBSD-main-amd64-test - Build #25140 (b37333899bd27a74bdef34b7f34eb41bc6bd51bd) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25140/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25140/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25140/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

278d6950943a9fec2bddb037b547c04a847c54ba by mav:
libpmc: Import AMD Zen 4 PMU events

bf454ca88bdf4acfa873386e876ff5e772e6a830 by markj:
wg: Add netmap support

c0f13232410cf881475d6e4dbd0ec28ab3476c59 by markj:
wg tests: Add a simple regression test case for netmap support

955f213fa2f14d5b5e9b655d8922e28315eb9fa3 by markj:
graid3: Fix teardown in g_raid3_try_destroy()

6815606c827a321cfa12e2e026bcffeace8b9d14 by se:
ldconfig: fix man-page - duplicate dot at end of sentence

b37333899bd27a74bdef34b7f34eb41bc6bd51bd by des:
adduser: A few more improvements.



The end of the build log:

[...truncated 4.66 MiB...]
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.484s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath4_getroute  ->  epair0a: Ethernet address: 02:cf:47:a8:51:0a
epair0b: Ethernet address: 02:cf:47:a8:51:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.507s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[change_new_weight1]  ->  epair0a: Ethernet address: 02:7d:c5:97:aa:0a
epair0b: Ethernet address: 02:7d:c5:97:aa:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.554s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[change_new_weight2]  ->  epair0a: Ethernet address: 02:44:32:95:16:0a
epair0b: Ethernet address: 02:44:32:95:16:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.512s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[change_new_weight3]  ->  epair0a: Ethernet address: 02:8b:87:d9:15:0a
epair0b: Ethernet address: 02:8b:87:d9:15:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.553s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[change_same_weight1]  ->  epair0a: Ethernet address: 02:18:3f:8b:15:0a
epair0b: Ethernet address: 02:18:3f:8b:15:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.512s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[change_same_weight2]  ->  epair0a: Ethernet address: 02:21:36:1b:0d:0a
epair0b: Ethernet address: 02:21:36:1b:0d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.574s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[correctness1]  ->  epair0a: Ethernet address: 02:38:19:dd:6a:0a
epair0b: Ethernet address: 02:38:19:dd:6a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.548s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[correctness2]  ->  epair0a: Ethernet address: 02:c0:d0:4f:7d:0a
epair0b: Ethernet address: 02:c0:d0:4f:7d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.507s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[transition_multi]  ->  epair0a: Ethernet address: 02:7f:71:78:f4:0a
epair0b: Ethernet address: 02:7f:71:78:f4:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.516s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[transition_single1]  ->  epair0a: Ethernet address: 02:fe:58:4b:9d:0a
epair0b: Ethernet address: 02:fe:58:4b:9d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.552s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[transition_single2]  ->  epair0a: Ethernet address: 02:3b:0c:34:04:0a
epair0b: Ethernet address: 02:3b:0c:34:04:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.544s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[weight1]  ->  epair0a: Ethernet address: 02:67:52:fb:48:0a
epair0b: Ethernet address: 02:67:52:fb:48:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.543s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[weight2]  ->  epair0a: Ethernet address: 02:f9:19:4f:4d:0a
epair0b: Ethernet address: 02:f9:19:4f:4d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.515s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[weight3_max0]  ->  epair0a: Ethernet address: 02:3f:e4:ca:c7:0a
epair0b: Ethernet address: 02:3f:e4:ca:c7:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.512s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6[weight3_max1]  ->  epair0a: Ethernet address: 02:f6:c8:08:35:0a
epair0b: Ethernet address: 02:f6:c8:08:35:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.492s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6_add_same_eexist  ->  epair0a: Ethernet address: 02:9a:c0:b2:ad:0a
epair0b: Ethernet address: 02:9a:c0:b2:ad:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.486s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6_change_unknown_esrch  ->  epair0a: Ethernet address: 02:40:79:09:24:0a
epair0b: Ethernet address: 02:40:79:09:24:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.479s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6_del_unknown_esrch  ->  epair0a: Ethernet address: 02:21:86:14:83:0a
epair0b: Ethernet address: 02:21:86:14:83:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.542s]
sys/net/routing/test_rtsock_multipath.py:TestRtmMultipath::test_rtm_multipath6_getroute  ->  epair0a: Ethernet address: 02:dc:75:25:72:0a
epair0b: Ethernet address: 02:dc:75:25:72:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.498s]
sys/net/routing/test_rtsock_ops:socket_rtsock_openclose  ->  passed  [0.007s]
sys/netgraph/basic:message  ->  passed  [0.200s]
sys/netgraph/basic:node  ->  passed  [0.116s]
sys/netgraph/basic:queuelimit  ->  expected_failure: Queue full (320): 1 checks failed as expected; see output for more details  [0.076s]
sys/netgraph/basic:same_name  ->  failed in ng_con_part2()
passed  [0.009s]
sys/netgraph/basic:send_recv  ->  passed  [0.064s]
sys/netgraph/bridge:basic  ->  passed  [0.448s]
sys/netgraph/bridge:loop  ->  passed  [0.117s]
sys/netgraph/bridge:many_broadcasts  ->  expected_failure: netgraph queue full (191): 1 checks failed as expected; see output for more details  [11.880s]
sys/netgraph/bridge:many_unicasts  ->  panic: malloc(M_WAITOK) with sleeping prohibited
cpuid = 1
time = 1713654748
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00a88b7af0
vpanic() at vpanic+0x135/frame 0xfffffe00a88b7c20
panic() at panic+0x43/frame 0xfffffe00a88b7c80
malloc_dbg() at malloc_dbg+0xe2/frame 0xfffffe00a88b7ca0
malloc() at malloc+0x2c/frame 0xfffffe00a88b7ce0
alloc_unr_specific() at alloc_unr_specific+0x42/frame 0xfffffe00a88b7d30
ng_bridge_newhook() at ng_bridge_newhook+0x118/frame 0xfffffe00a88b7db0
ng_con_part2() at ng_con_part2+0x9b/frame 0xfffffe00a88b7df0
ng_apply_item() at ng_apply_item+0x195/frame 0xfffffe00a88b7e80
ngthread() at ngthread+0x26a/frame 0xfffffe00a88b7ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe00a88b7f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00a88b7f30
--- trap 0xc, rip = 0x7c8d24a94ea, rsp = 0x7c8cfce9418, rbp = 0x7c8cfce9510 ---
KDB: enter: panic
[ thread pid 58439 tid 110725 ]
Stopped at      kdb_enter+0x33: movq    $0,0x1052722(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008f7d7140
curthread    = 0xfffff80018475740: pid 58439 tid 110725 critnest 1 "ng_queue0"
curpcb       = 0xfffff80018475c60
fpcurthread  = none
idlethread   = 0xfffff800038a5000: tid 100004 "idle: cpu1"
self         = 0xffffffff82411000
curpmap      = 0xffffffff81b87ef0
tssp         = 0xffffffff82411384
rsp0         = 0xfffffe00a88b8000
kcr3         = 0x800000000237f003
ucr3         = 0xffffffffffffffff
scr3         = 0x592a9ebe
gs32p        = 0xffffffff82411404
ldt          = 0xffffffff82411444
tss          = 0xffffffff82411434
curvnet      = 0xfffff800030f6000
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 57m12s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-25140' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
x ./run.sh
x ./disable-zfs-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins5037083464581506102.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'b37333899bd27a74bdef34b7f34eb41bc6bd51bd', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../b37333899bd27a74bdef34b7f34eb41bc6bd51bd/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address