zfs raid1 error resilvering and mount

[Fleuriot Damien]

If I understand you correctly, you have:
- booted another system from flash
- NOT replaced the failed device
- under this booted system, resilvering takes place automatically


While I cannot tell why ZFS tries to resilver without a new, proper device, I think it will only work once you've replaced the failed device.

Could you try replacing the failed drive ?


On Feb 19, 2013, at 12:39 PM, Konstantin Kuklin <konstantin.kuklin at gmail.com> wrote:

> i did`t replace disk, after reboot system not started (zfs installed
> as default root system) and i boot from another system(from flash) and
> resilvering has auto start and show me warnings with freeze
> progress(dead on checking zroot/var/crash )
> replacing dead disk healing var/crash with <0x0> adress?
> 
> 2013/2/18 Fleuriot Damien <ml at my.gd>:
>> Reassure me here, you've replaced your failed vdev before trying to resilver right ?
>> 
>> Your zpool status suggests otherwise, so I only want to make sure this is a status from before replacing your drive.
>> 
>> 
>> On Feb 18, 2013, at 8:48 AM, Konstantin Kuklin <konstantin.kuklin at gmail.com> wrote:
>> 
>>> i can`t do it, because resilvering in progress(freeze on 0.1%) and zfs
>>> list empty
>>> 
>>> 2013/2/17 Fleuriot Damien <ml at my.gd>:
>>>> Hmmm, zfs destroy -f zroot/var/crash ?
>>>> 
>>>> Then you can try to zfs mount -a
>>>> 
>>>> 
>>>> 
>>>> Removing pjd and mm from cc, if they want to read your message they're old enough to check their ML subscription.
>>>> 
>>>> 
>>>> On Feb 17, 2013, at 3:46 PM, Konstantin Kuklin <konstantin.kuklin at gmail.com> wrote:
>>>> 
>>>>> hi, i have raid1 on zfs with 2 device on pool
>>>>> first device died and boot from second not working...
>>>>> 
>>>>> i try to get http://mfsbsd.vx.sk/ flash and load from it with zpool import
>>>>> http://puu.sh/2402E
>>>>> 
>>>>> when  i load zfs.ko and opensolaris.ko i see this message:
>>>>> Solaris: WARNING: Can't open objset for zroot/var/crash
>>>>> Solaris: WARNING: Can't open objset for zroot/var/crash
>>>>> 
>>>>> zpool status:
>>>>> http://puu.sh/2405f
>>>>> 
>>>>> resilvering freeze with:
>>>>> zpool status -v
>>>>>      .............
>>>>>      zroot/usr:<0x28ff>
>>>>>      zroot/usr:<0x29ff>
>>>>>      zroot/usr:<0x2aff>
>>>>>      zroot/var/crash:<0x0>
>>>>> root at Flash:/root #
>>>>> 
>>>>> how i can delete or drop it fs zroot/var/crash (1m-10m size i didn`t
>>>>> remember) and mount other zfs points with my data
>>>>> --
>>>>> С уважением
>>>>> Куклин Константин.
>>>>> _______________________________________________
>>>>> freebsd-fs at freebsd.org mailing list
>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-fs
>>>>> To unsubscribe, send any mail to "freebsd-fs-unsubscribe at freebsd.org"
>>>> 
>>> 
>>> 
>>> 
>>> --
>>> С уважением
>>> Куклин Константин.
>> 
> 
> 
> 
> --
> С уважением
> Куклин Константин.