PERFORCE change 135018 for review
Kip Macy
kmacy at FreeBSD.org
Fri Feb 8 00:03:58 PST 2008
http://perforce.freebsd.org/chv.cgi?CH=135018
Change 135018 by kmacy at kmacy:storage:toehead on 2008/02/08 08:03:39
shrink config file
Affected files ...
.. //depot/projects/toehead/sys/amd64/conf/GENERIC#6 edit
Differences ...
==== //depot/projects/toehead/sys/amd64/conf/GENERIC#6 (text+ko) ====
@@ -25,6 +25,7 @@
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
+makeoptions MODULES_OVERRIDE="cxgb em"
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
@@ -188,66 +189,13 @@
#device puc
# PCI Ethernet NICs.
-device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
-device ixgb # Intel PRO/10GbE Ethernet Card
-device le # AMD Am7900 LANCE and Am79C9xx PCnet
-device txp # 3Com 3cR990 (``Typhoon'')
-device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
-device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
-device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
-device dc # DEC/Intel 21143 and various workalikes
-device fxp # Intel EtherExpress PRO/100B (82557, 82558)
-device lge # Level 1 LXT1001 gigabit Ethernet
-device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
-device nfe # nVidia nForce MCP on-board Ethernet
-device nge # NatSemi DP83820 gigabit Ethernet
-#device nve # nVidia nForce MCP on-board Ethernet Networking
-device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
-device re # RealTek 8139C+/8169/8169S/8110S
-device rl # RealTek 8129/8139
-device sf # Adaptec AIC-6915 (``Starfire'')
-device sis # Silicon Integrated Systems SiS 900/SiS 7016
-device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
-device ste # Sundance ST201 (D-Link DFE-550TX)
-device ti # Alteon Networks Tigon I/II gigabit Ethernet
-device tl # Texas Instruments ThunderLAN
-device tx # SMC EtherPower II (83c170 ``EPIC'')
-device vge # VIA VT612x gigabit Ethernet
-device vr # VIA Rhine, Rhine II
-device wb # Winbond W89C840F
-device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
-# ISA Ethernet NICs. pccard NICs included.
-device cs # Crystal Semiconductor CS89x0 NIC
-# 'device ed' requires 'device miibus'
-device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
-device ex # Intel EtherExpress Pro/10 and Pro/10+
-device ep # Etherlink III based cards
-device fe # Fujitsu MB8696x based cards
-device sn # SMC's 9000 series of Ethernet chips
-device xe # Xircom pccard Ethernet
-
-# Wireless NIC cards
-device wlan # 802.11 support
-device wlan_wep # 802.11 WEP support
-device wlan_ccmp # 802.11 CCMP support
-device wlan_tkip # 802.11 TKIP support
-device wlan_amrr # AMRR transmit rate control algorithm
-device wlan_scan_ap # 802.11 AP mode scanning
-device wlan_scan_sta # 802.11 STA mode scanning
-device an # Aironet 4500/4800 802.11 wireless NICs.
-device ath # Atheros pci/cardbus NIC's
-device ath_hal # Atheros HAL (Hardware Access Layer)
-device ath_rate_sample # SampleRate tx rate control for ath
-device awi # BayStack 660 and others
-device ral # Ralink Technology RT2500 wireless NICs.
-device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
# Pseudo devices.
device loop # Network loopback
@@ -279,8 +227,6 @@
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
-device ural # Ralink Technology RT2500USB wireless NICs
-device rum # Ralink Technology RT2501USB wireless NICs
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Serial devices
@@ -314,11 +260,12 @@
options ALT_BREAK_TO_DEBUGGER
-options ALQ
-options KTR_ALQ
-options KTR_COMPILE=(KTR_SCHED)
-options KTR_CPUMASK=0x3
-options KTR_ENTRIES=8192
-options KTR_MASK=(KTR_SCHED)
-options KTR_VERBOSE
+options KTR
+#options ALQ
+#options KTR_ALQ
+options KTR_COMPILE=(KTR_SPARE2)
+options KTR_CPUMASK=0x7
+options KTR_ENTRIES=65536
+options KTR_MASK=(KTR_SPARE2)
+#options KTR_VERBOSE
More information about the p4-projects
mailing list