no DVI output after upgrading to xorg 6.8.2
dejan.lesjak at ijs.si
Fri Mar 18 10:46:41 PST 2005
On Friday 18 of March 2005 18:27, Palle Girgensohn wrote:
> After upgrading xorg to 6.8.2, my Radeon 9600 SE refuses to send any output
> on the DVI connector. Not even in BIOS during boot. VGA works fine. Before
> upgrading it worked just fine.
> Here's what Xorg.0.log says about it:
> (II) RADEON(0): Primary:
> Monitor -- CRT
> Connector -- VGA
> DAC Type -- Primary
> TMDS Type -- NONE
> DDC Type -- VGA_DDC
> (II) RADEON(0): Secondary:
> Monitor -- NONE
> Connector -- DVI-I
> DAC Type -- TVDAC/ExtDAC
> TMDS Type -- Internal
> DDC Type -- DVI_DDC
> (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000;
> (WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode
> I've shut down the system and tried all sorts of things. I went back to
> 6.8.1, but that didn't help (why should it, even in BIOS I don't get a
> signal). Is the card broken, or is it some "burnt in" config that happened?
> In the latter case, how can I fix it?
> I've enclosed the xorg log and config.
Unfortunately it seems that this list doesn't like attachments, could you put
them somewhere and point to them.
I would suspect (given that downgrading to 6.8.1 doesn't help and furthermore
even video before you get to X not working) hardware failure, but I might be
wrong. You might want to ask at xorg at lists.freedesktop.org as even if this is
a problem with X.Org server, it most probably would not be FreeBSD specific
and there is a better chance you might find someone that has the same
More information about the freebsd-x11