kern/140796: [ath] [panic] Cannot attach (unable to attach hardware; HAL status 3) under 8, panic in 7.x

[Adrian Chadd]

I'd prefer you stick testing results on the PR; then the reply will go
to freebsd-wireless@ and there's a log in the PR of it all.


Adrian

On 25 May 2011 04:54, Dalibor Gudzic <dalibor.gudzic at gmail.com> wrote:
> Hi Adrian,
>
> On Tue, May 24, 2011 at 2:29 PM, Adrian Chadd <adrian at freebsd.org> wrote:
>> On 24 May 2011 20:20, Dalibor Gudzic <dalibor.gudzic at gmail.com> wrote:
>>
> snipped
>>
>> Have you tried freebsd-current? I've done quite a bit of work with the
>> ath driver in FreeBSD-current.
>>
>
> No, but I will start downloading it now and give it a try.
>
>
>> Please make sure you're compiling with:
>>
>> options         ATH_DEBUG
>> options         ATH_DIAGAPI
>> options         AH_DEBUG
>> device          ath_hal
>> option          AH_SUPPORT_AR5416
>>
>> and see if that works. If not, reboot with the sysctl
>> hw.ath.hal.debug=0xffffffff set in /boot/loader.conf appropriately, so
>> I can hopefully get some debugging as to why the hardware isn't waking
>> up as expected.
>>
>> Thanks,
>>
>
> I will try with these, thanx (I'm not on FreeBSD box now). One more
> thing, should I post replies here or on kern/116444? Also, would you
> be interested in verbose dmesg from 8.2-RELEASE?
>
> Thanx for taking time for this. All best
>
> Dalibor
>