kern/140796: [ath] [panic] Cannot attach (unable to attach hardware; HAL status 3) under 8, panic in 7.x

[Dalibor Gudzic]

Hi Adrian,

On Tue, May 24, 2011 at 2:29 PM, Adrian Chadd <adrian at freebsd.org> wrote:
> On 24 May 2011 20:20, Dalibor Gudzic <dalibor.gudzic at gmail.com> wrote:
>
snipped
>
> Have you tried freebsd-current? I've done quite a bit of work with the
> ath driver in FreeBSD-current.
>

No, but I will start downloading it now and give it a try.


> Please make sure you're compiling with:
>
> options         ATH_DEBUG
> options         ATH_DIAGAPI
> options         AH_DEBUG
> device          ath_hal
> option          AH_SUPPORT_AR5416
>
> and see if that works. If not, reboot with the sysctl
> hw.ath.hal.debug=0xffffffff set in /boot/loader.conf appropriately, so
> I can hopefully get some debugging as to why the hardware isn't waking
> up as expected.
>
> Thanks,
>

I will try with these, thanx (I'm not on FreeBSD box now). One more
thing, should I post replies here or on kern/116444? Also, would you
be interested in verbose dmesg from 8.2-RELEASE?

Thanx for taking time for this. All best

Dalibor