usb/96599: [patch] [usb] Sony Handycam DCR-HC32E memory stick slot

[Eugene Grosbein]

The following reply was made to PR usb/96599; it has been noted by GNATS.

From: Eugene Grosbein <eugen at grosbein.pp.ru>
To: bug-followup at freebsd.org
Cc: Maxim Konovalov <maxim at macomnet.ru>
Subject: Re: usb/96599: [patch] [usb] Sony Handycam DCR-HC32E memory stick slot
Date: Wed, 24 May 2006 02:15:21 +0800

 > could you please follow a guideline for the quirks submission at              
 > http://root.org/~nate/freebsd/scsi/quirks.html.  Basically we need            
 >                                                                               
 > # Output of "camcontrol inquiry yourdevice"
 
 # camcontrol inquiry 1:0:0
 pass0: <Sony Sony Camcorder 5.00> Removable Direct Access SCSI-0 device 
 pass0: Serial Number 
 pass0: 1.000MB/s transfers
 
 > # Manufacturer name, model number, etc.
 
 Sony Handycam DCR-HC32E memory stick slot
 
 > # Transport type (FC, SCSI, USB, Firewire)
 
 USB
 
 > # Output from dmesg for failed attach attempts
 
 I'll need to back out my patch, rebuild the kernel and reboot the system
 to obtain them... A couple of days later, if absolutly necessary.
 
 > # Output from dmesg for successful attach attempts (after quirk added)
 
 umass0: Sony Sony DSC, rev 2.00/5.00, addr 2
 umass0: RBC over CBI; quirks = 0x1000
 umass0:1:0:-1: Attached to scbus1
 da0 at umass-sim0 bus 0 target 0 lun 0
 da0: <Sony Sony Camcorder 5.00> Removable Direct Access SCSI-0 device 
 da0: Serial Number \^_
 da0: 1.000MB/s transfers
 da0: 466MB (955392 512 byte sectors: 64H 32S/T 466C)
 
 > # Output of "usbdevs -v" with device attached
 
 # usbdevs -v
 Controller /dev/usb0:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
  port 1 addr 2: full speed, self powered, config 1, HP ScanJet 2200C(0x0605), Hewlett-Packard(0x03f0), rev 1.00
  port 2 addr 3: low speed, power 30 mA, config 1, Back-UPS 500 FW: 6.5.I USB FW: c1(0x0002), American Power Conversion(0x051d), rev 1.00
 Controller /dev/usb1:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
  port 1 powered
  port 2 addr 2: full speed, self powered, config 1, Sony DSC(0x002e), Sony(0x054c), rev 5.00
 Controller /dev/usb2:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
  port 1 powered
  port 2 powered
 Controller /dev/usb3:
 addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), VIA(0x0000), rev 1.00
  port 1 powered
  port 2 powered
  port 3 powered
  port 4 powered
 
 
 Eugene Grosbein