usb/96546 : [usb] [patch] Add support (quirk) for EasyMP3
EM732X USB 2.0 Flash MP3 Player
Eugene Grosbein
eugen at grosbein.pp.ru
Tue May 23 17:50:33 UTC 2006
The following reply was made to PR usb/96546; it has been noted by GNATS.
From: Eugene Grosbein <eugen at grosbein.pp.ru>
To: bug-followup at freebsd.org
Cc: Maxim Konovalov <maxim at macomnet.ru>
Subject: Re: usb/96546 : [usb] [patch] Add support (quirk) for EasyMP3 EM732X USB 2.0 Flash MP3 Player
Date: Wed, 24 May 2006 01:42:36 +0800
> could you please follow a guideline for the quirks submission at
> http://root.org/~nate/freebsd/scsi/quirks.html. Basically we need
>
> # Output of "camcontrol inquiry yourdevice"
# camcontrol inquiry 1:0:0
pass0: <EM732X MP3 Player 1.00> Removable Direct Access SCSI-0 device
pass0: Serial Number }ß|\BF»¿¦¼¹
pass0: 1.000MB/s transfers
Serial Number seems to contain binary junk.
> # Manufacturer name, model number, etc.
EasyMP3 EM732X USB 2.0 Flash MP3 Player
http://www.easydisk.ru/files/products/easymp3.php
> # Transport type (FC, SCSI, USB, Firewire)
USB
> # Output from dmesg for failed attach attempts
It just hangs trying to attach the device. It's also not possible
to reboot the system cleanly while the device is attached,
rc.shutdown timeout occures.
> # Output from dmesg for successful attach attempts (after quirk added)
umass0: vendor 0x0419 product 0xaaf8, rev 1.10/1.00, addr 2
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:1:0:-1: Attached to scbus1
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <EM732X MP3 Player 1.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 242MB (495616 512 byte sectors: 64H 32S/T 242C
> # Output of "usbdevs -v" with device attached
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
port 1 addr 2: full speed, self powered, config 1, HP ScanJet 2200C(0x0605), Hewlett-Packard(0x03f0), rev 1.00
port 2 addr 3: low speed, power 30 mA, config 1, Back-UPS 500 FW: 6.5.I USB FW: c1(0x0002), American Power Conversion(0x051d), rev 1.00
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
port 1 addr 2: full speed, self powered, config 1, product 0xaaf8(0xaaf8), vendor 0x0419(0x0419), rev 1.00
port 2 powered
Controller /dev/usb3:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), VIA(0x0000), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
Eugene Grosbein
More information about the freebsd-usb
mailing list