usb/87519: cannot install on USB-only system

[Bruce Walker]

>Number:         87519
>Category:       usb
>Synopsis:       cannot install on USB-only system
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-usb
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sun Oct 16 15:50:15 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Bruce Walker
>Release:        FreeBSD 6.0-BETA5 i386
>Organization:
Borderware Technologies Inc.
>Environment:
System: FreeBSD mxedge.home.wezel.com 6.0-BETA5 FreeBSD 6.0-BETA5 #0: Mon Sep 19 00:12:45 UTC 2005 root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC i386


	
System is a Portwell NAR 2054.  It has no accessible PS/2 ports at all,
just two USB ports.

Keyboard is a standard Apple USB keyboard.


Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA5 #0: Mon Sep 19 00:12:45 UTC 2005
    root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: VIA C3 Nehemiah+RNG (997.46-MHz 686-class CPU)
  Origin = "CentaurHauls"  Id = 0x693  Stepping = 3
  Features=0x380b13d<FPU,DE,PSE,TSC,MSR,CX8,MTRR,PGE,CMOV,MMX,FXSR,SSE>
real memory  = 260046848 (248 MB)
avail memory = 245014528 (233 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 8601 (Apollo ProMedia/PLE133Ta) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.4 (no driver attached)
re0: <RealTek 8139C+ 10/100BaseTX> port 0xdc00-0xdcff mem 0xe7000000-0xe70000ff irq 5 at device 9.0 on pci0
miibus0: <MII bus> on re0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: Ethernet address: 00:90:fb:04:5a:7e
re1: <RealTek 8139C+ 10/100BaseTX> port 0xe000-0xe0ff mem 0xe7001000-0xe70010ff irq 10 at device 10.0 on pci0
miibus1: <MII bus> on re1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re1: Ethernet address: 00:90:fb:04:5a:7d
re2: <RealTek 8139C+ 10/100BaseTX> port 0xe400-0xe4ff mem 0xe7002000-0xe70020ff irq 11 at device 11.0 on pci0
miibus2: <MII bus> on re2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re2: Ethernet address: 00:90:fb:04:5a:7c
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
uhub1: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.10, addr 2
uhub1: 3 ports with 2 removable, bus powered
ukbd0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 3, iclass 3/1
kbd1 at ukbd0
uhid0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 3, iclass 3/1
Timecounter "TSC" frequency 997463205 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <ASUS CD-S400/A/V2.0S> at ata0-master UDMA33
ad2: 19077MB <IBM DJSA-220 JS4OAC2A> at ata1-master UDMA66
Trying to mount root from ufs:/dev/ad2s1a
IP Filter: v4.1.8 initialized.  Default = pass all, Logging = enabled
re0: promiscuous mode enabled
re1: promiscuous mode enabled

>Description:
	Attempted to install FreeBSD 6.0 RC1 on a Portwell system using
	attached CDROM.  The BIOS works with the USB keyboard, but none
	of the FreeBSD prompts see it.  There's no way to accomplish the
	install because you cannot select any menu choices.

	Earlier, I tried the same install on a Dell system using a Dell
	USB keyboard without luck.

	(I finally installed this Portwell by moving the HDD to a
	Thinkpad notebook and installing there, then replacing the
	HDD.)

>How-To-Repeat:
	Attache a USB keyboard, remove any PS/2 keyboard (if connector
	available), attempt install.

>Fix:

	


>Release-Note:
>Audit-Trail:
>Unformatted: