usb/83863: Communication problem between opensc/openct via USB with e-gate smart-card.

[Hans Petter Selasky]

On Wednesday 03 August 2005 13:50, Janos Mohacsi wrote:
> The following reply was made to PR usb/83863; it has been noted by GNATS.
>
> From: Janos Mohacsi <mohacsi at niif.hu>
> To: bug-followup at FreeBSD.org, janos.mohacsi at bsd.hu
> Cc:
> Subject: Re: usb/83863: Communication problem between opensc/openct via USB
>  with e-gate smart-card.
> Date: Wed, 03 Aug 2005 13:42:45 +0200
>
>  I am using UHCI. See:
>
>
>  mohacsi at scone> sudo usbdevs -v
>  Controller /dev/usb0:
>  addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
>  Intel(0x0000), rev 1.00
>   port 1 powered
>   port 2 powered
>  Controller /dev/usb1:
>  addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
>  Intel(0x0000), rev 1.00
>   port 1 addr 2: low speed, power 30 mA, config 1, SchlumbergerSema
>  Cryptoflex e-gate(0x0001), SchlumbergerSema(0x0973), rev 1.00
>   port 2 powered
>  Controller /dev/usb2:
>  addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
>  Intel(0x0000), rev 1.00
>   port 1 powered
>   port 2 powered
>
>  Should I try EHCI?

If you got EHCI, you could try connecting your device through an USB 2.0 hub, 
if it is not USB 2.0 compliant.

>
>  Is it normal to have patch failure to sys/i386/include/bus_at386.h ?
>

The contents of this file has been moved into "sys/i386/include/bus.h". The  
patches are not critical for the USB driver, so it is ok if they fail.

--HPS