usb/83863: Communication problem between opensc/openct via USB
with e-gate smart-card.
Janos Mohacsi
mohacsi at niif.hu
Wed Aug 3 11:50:19 GMT 2005
The following reply was made to PR usb/83863; it has been noted by GNATS.
From: Janos Mohacsi <mohacsi at niif.hu>
To: bug-followup at FreeBSD.org, janos.mohacsi at bsd.hu
Cc:
Subject: Re: usb/83863: Communication problem between opensc/openct via USB
with e-gate smart-card.
Date: Wed, 03 Aug 2005 13:42:45 +0200
I am using UHCI. See:
mohacsi at scone> sudo usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
port 1 addr 2: low speed, power 30 mA, config 1, SchlumbergerSema
Cryptoflex e-gate(0x0001), SchlumbergerSema(0x0973), rev 1.00
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
Should I try EHCI?
Is it normal to have patch failure to sys/i386/include/bus_at386.h ?
|--- sys/i386/include/bus_at386.h Sat Nov 11 11:11:00 2000
--------------------------
Patching file sys/i386/include/bus_at386.h using Plan A...
Hunk #1 failed at 67.
Hunk #2 failed at 293.
Hunk #3 failed at 303.
Hunk #4 failed at 329.
Hunk #5 failed at 339.
Hunk #6 failed at 365.
Hunk #7 failed at 375.
Hunk #8 failed at 421.
Hunk #9 failed at 432.
Hunk #10 failed at 474.
Hunk #11 failed at 485.
Hunk #12 failed at 527.
Hunk #13 failed at 538.
Hunk #14 failed at 686.
Hunk #15 failed at 696.
Hunk #16 failed at 722.
Hunk #17 failed at 732.
Hunk #18 failed at 758.
Hunk #19 failed at 768.
Hunk #20 failed at 815.
Hunk #21 failed at 826.
More information about the freebsd-usb
mailing list