aacraid drives missing after update 10.0 -> 10.1 ?
Kurt Jaeger
lists at opsec.eu
Sun Nov 16 22:11:51 UTC 2014
Hi!
> The raid controller: Adaptec 6405E
Replacing it with an Adaptec ASR8405 and the drives are back alive.
Any ideas why this happens ? That behaviour is very unexpected.
aacraid0: <Adaptec RAID Controller> port 0xb000-0xb0ff mem 0xf7400000-0xf74fffff,0xf7580000-0xf75803ff irq 16 at device 0.0 on pci6
aacraid0: Enable Raw I/O
aacraid0: Enable 64-bit array
aacraid0: using MSI-X interrupts (32 vectors)
aacraid0: New comm. interface type2 enabled
aacraid0: ASR8405, aacraid driver 3.2.5-1
aacraidp0 on aacraid0
aacraidp1 on aacraid0
aacraidp2 on aacraid0
aacraidp3 on aacraid0
da0 at aacraidp1 bus 0 scbus1 target 0 lun 0
da0: <ATA HGST HUS724020AL MJ6O> Fixed Direct Access SCSI-6 device
da0: Serial Number PK1B31P8H5DD2V
da0: 300.000MB/s transfers
da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da1 at aacraidp1 bus 0 scbus1 target 1 lun 0
da1: <ATA HGST HUS724020AL MJ6O> Fixed Direct Access SCSI-6 device
da1: Serial Number PK1B31P8H5L97P
da1: 300.000MB/s transfers
da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
--
pi at opsec.eu +49 171 3101372 6 years to go !
More information about the freebsd-stable
mailing list