em driver regression

[Mike Tancsa]

At 09:12 AM 4/8/2010, Mike Tancsa wrote:
>Hi Jack,
>         I looks like the latest MFC to RELENG_8 for the em driver 
> has caused a regression. The box is not doing much as its a 
> development server in the lab. This is an Intel MB (DX58SO). dmesg 
> and pciconf -lvc attached.



Here are the stats from the NIC as well.

em0: Excessive collisions = 0
em0: Sequence errors = 0
em0: Defer count = 0
em0: Missed Packets = 0
em0: Receive No Buffers = 0
em0: Receive Length Errors = 0
em0: Receive errors = 0
em0: Crc errors = 0
em0: Alignment errors = 0
em0: Collision/Carrier extension errors = 0
em0: watchdog timeouts = 16
em0: XON Rcvd = 0
em0: XON Xmtd = 0
em0: XOFF Rcvd = 0
em0: XOFF Xmtd = 0
em0: Good Packets Rcvd = 65839
em0: Good Packets Xmtd = 13100
em0: TSO Contexts Xmtd = 203
em0: TSO Contexts Failed = 0

It just grabs the IP via DHCP

em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
         options=399b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
         ether 00:1c:c0:95:0d:0d
         inet 192.168.xx.yy netmask 0xffffff00 broadcast 192.168.xx.zz
         media: Ethernet autoselect (100baseTX <full-duplex>)
         status: active



--------------------------------------------------------------------
Mike Tancsa,                                      tel +1 519 651 3400
Sentex Communications,                            mike at sentex.net
Providing Internet since 1994                    www.sentex.net
Cambridge, Ontario Canada                         www.sentex.net/mike