Booting 7.1-STABLE on supermicro 5015-MF (PDSMI+)

[Krassimir Slavchev]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Royce Williams wrote:
> Krassimir Slavchev wrote, on 2/17/2009 8:48 AM:
>> It boots 7.1-RELEASE from the CDROM just fine but when boots from an IDE
>> disk it crashes right after loading the kernel:
>>
>> http://mnemonic.bulinfo.net/~krassi/crash/supermicro_crash.jpg
>>
>> Booting from the USB produces exactly the same crash. I know that the
>> BIOS of this board is buggy although it is latest.
>> I am curious why it boots from the CDROM but cannot boots from the IDE
>> disk. I just disconnect the CDROM and connect the IDE disk. The same IDE
>> disk boots fine on other hardware. I have tried with 7.1-PRERELEASE
>> which is 2-3 months older than 7.1-RELEASE and it crashes in same way.
> 
> I see from the phot that you're running a custom kernel.  What's 
> different between that kernel and GENERIC?

Almost nothing.

> 
> Data point:  I'm running 7.1-RELEASE, installed from CD, on a PDSMI+ 
> board, but I am booting from SATA.  This may help to rule out possible 
> non-IDE issues.

When I boot from CD the IDE disk remains undetected but with SATA disk
no problems. So the problem seems to be only with IDE disks.

I am going to buy a SATA disks.

> 
> I'm tracking with freebsd-update(8), but there have been no 
> kernel updates yet.  It's a fresh install with no kernel or sysctl 
> tuning, and hasn't taken any load yet.
> 
> $ uptime
> 10:02AM  up 10 days, 18:50, 1 user, load averages: 0.00, 0.00, 0.00
> 
> $ uname -a
> FreeBSD dragonfly.acsalaska.net 7.1-RELEASE FreeBSD 7.1-RELEASE #0: Thu Jan  1 14:37:25 UTC 2009     root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386
> 
> $ cat /var/run/dmesg.boot
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.1-RELEASE #0: Thu Jan  1 14:37:25 UTC 2009
>     root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz (2394.01-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
>   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
>   AMD Features=0x20100000<NX,LM>
>   AMD Features2=0x1<LAHF>
>   Cores per package: 2
> real memory  = 3756916736 (3582 MB)
> avail memory = 3672895488 (3502 MB)
> ACPI APIC Table: <PTLTD          APIC  >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> kbd1 at kbdmux0
> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> acpi0: <PTLTD   RSDT> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
> pci9: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9
> pci10: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
> pci13: <ACPI PCI bus> on pcib4
> em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x4000-0x401f mem 0xe0200000-0xe021ffff irq 16 at device 0.0 on pci13
> em0: Using MSI interrupt
> em0: [FILTER]
> em0: Ethernet address: 00:30:48:8d:30:74
> pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
> pci14: <ACPI PCI bus> on pcib5
> em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x5000-0x501f mem 0xe0300000-0xe031ffff irq 17 at device 0.0 on pci14
> em1: Using MSI interrupt
> em1: [FILTER]
> em1: Ethernet address: 00:30:48:8d:30:75
> uhci0: <UHCI (generic) USB controller> port 0x3000-0x301f irq 23 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0x3020-0x303f irq 19 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 18 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb2: <UHCI (generic) USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device 29.3 on pci0
> uhci3: [GIANT-LOCKED]
> uhci3: [ITHREAD]
> usb3: <UHCI (generic) USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0000000-0xe00003ff irq 23 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
> uhub4: 8 ports with 8 removable, self powered
> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci15: <ACPI PCI bus> on pcib6
> vgapci0: <VGA-compatible display> port 0x6000-0x60ff mem 0xe8000000-0xefffffff,0xe0400000-0xe040ffff irq 16 at device 0.0 on pci15
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci0
> ata1: [ITHREAD]
> atapci1: <Intel ICH7 SATA300 controller> port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xe0000400-0xe00007ff irq 19 at device 31.2 on pci0
> atapci1: [ITHREAD]
> ata2: <ATA channel 0> on atapci1
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci1
> ata3: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A, console
> sio0: [FILTER]
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> sio1: [FILTER]
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: does not respond
> device_attach: fdc0 attach returned 6
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 921092106000921
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 921092106000921
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: does not respond
> device_attach: fdc0 attach returned 6
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff pnpid ORM0000 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> ppbus0: [ITHREAD]
> plip0: <PLIP network interface> on ppbus0
> plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ppc0: [GIANT-LOCKED]
> ppc0: [ITHREAD]
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> acd0: CDROM <CD-224E/1.9A> at ata0-master UDMA33
> ad4: 238475MB <Seagate ST3250820AS 3.AAE> at ata2-master SATA150
> ad6: 238475MB <Seagate ST3250820AS 3.AAE> at ata3-master SATA150
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad4s1a
> $
> 
> Royce
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (FreeBSD)

iD8DBQFJm8dyxJBWvpalMpkRAjS7AKCCejCzBQEV6ja2kj8bltPA00zsIgCfVORC
OMt9scuIQIwz/Rthrf2aE2M=
=Tjvf
-----END PGP SIGNATURE-----