Driver for Intel 10GbE adapter
pluknet
pluknet at gmail.com
Wed Feb 11 15:57:51 PST 2009
2009/2/12 Kip Macy <kmacy at freebsd.org>:
> see ixgbe(4)
BTW I'm afraid ixgbe manpage still to be merged to 7.
>
> On Wed, Feb 11, 2009 at 2:43 PM, Greg Rivers
> <gcr+freebsd-stable at tharned.org> wrote:
>> I'm trying to light an Intel 10GbE adapter in an HP DL380 G5 using very
>> recent 7.1-STABLE amd64 with GENERIC kernel. I expected the ixbg(4) driver
>> to attach, but it does not.
>>
>> The labels on the card show:
>> INTEL(R) 10GbE XF SR 2 PORT SERVER ADAPTER
>> 893135
>> EXPX9502FXSRGP5
>>
>> 001B211170BE 028AD E15728-003
>>
>>
>> A verbose boot shows the card on the PCI bus, but no driver attaches:
>>
>> pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>> pcib11: domain 0
>> pcib11: secondary bus 23
>> pcib11: subordinate bus 23
>> pcib11: I/O decode 0x6000-0x6fff
>> pcib11: memory decode 0xfde00000-0xfdffffff
>> pcib11: no prefetched decode
>> pci23: <ACPI PCI bus> on pcib11
>> pci23: domain=0, physical bus=23
>> found-> vendor=0x8086, dev=0x10c6, revid=0x01
>> domain=0, bus=23, slot=0, func=0
>> class=02-00-00, hdrtype=0x00, mfdev=1
>> cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> intpin=a, irq=10
>> powerspec 3 supports D0 D3 current D0
>> MSI supports 1 message, 64 bit
>> MSI-X supports 18 messages in map 0x1c
>> map[10]: type Memory, range 32, base 0xfdfe0000, size 17, enabled
>> pcib11: requested memory range 0xfdfe0000-0xfdffffff: good
>> map[14]: type Memory, range 32, base 0xfdf80000, size 18, enabled
>> pcib11: requested memory range 0xfdf80000-0xfdfbffff: good
>> map[18]: type I/O Port, range 32, base 0x6000, size 5, enabled
>> pcib11: requested I/O range 0x6000-0x601f: in range
>> map[1c]: type Memory, range 32, base 0xfdf70000, size 14, enabled
>> pcib11: requested memory range 0xfdf70000-0xfdf73fff: good
>> pcib11: matched entry for 23.0.INTA
>> pcib11: slot 0 INTA hardwired to IRQ 19
>> found-> vendor=0x8086, dev=0x10c6, revid=0x01
>> domain=0, bus=23, slot=0, func=1
>> class=02-00-00, hdrtype=0x00, mfdev=1
>> cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>> intpin=b, irq=5
>> powerspec 3 supports D0 D3 current D0
>> MSI supports 1 message, 64 bit
>> MSI-X supports 18 messages in map 0x1c
>> map[10]: type Memory, range 32, base 0xfdf40000, size 17, enabled
>> pcib11: requested memory range 0xfdf40000-0xfdf5ffff: good
>> map[14]: type Memory, range 32, base 0xfdf00000, size 18, enabled
>> pcib11: requested memory range 0xfdf00000-0xfdf3ffff: good
>> map[18]: type I/O Port, range 32, base 0x6020, size 5, enabled
>> pcib11: requested I/O range 0x6020-0x603f: in range
>> map[1c]: type Memory, range 32, base 0xfdef0000, size 14, enabled
>> pcib11: requested memory range 0xfdef0000-0xfdef3fff: good
>> pcib11: matched entry for 23.0.INTB
>> pcib11: slot 0 INTB hardwired to IRQ 16
>> pci23: <network, ethernet> at device 0.0 (no driver attached)
>> pci23: <network, ethernet> at device 0.1 (no driver attached)
>>
>>
>> pciconf shows:
>>
>> none0 at pci0:23:0:0: class=0x020000 card=0xa15f8086 chip=0x10c68086
>> rev=0x01 hdr=0x00
>> vendor = 'Intel Corporation'
>> class = network
>> subclass = ethernet
>> none1 at pci0:23:0:1: class=0x020000 card=0xa15f8086 chip=0x10c68086
>> rev=0x01 hdr=0x00
>> vendor = 'Intel Corporation'
>> class = network
>> subclass = ethernet
>>
>>
>> I thought perhaps it would be a simple matter of adding/updating a card ID
>> in the driver header file, but I see that sys/dev/ixgb/ixgb_ids.h already
>> contains an entry for 0xA15F as listed above.
>>
>> Does anyone have experience with this card or know how to get it to probe
>> and attach? Thanks!
>>
>> --
>> Greg Rivers
>> _______________________________________________
>> freebsd-stable at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>
--
wbr,
pluknet
More information about the freebsd-stable
mailing list