can't write dvd (interrupt storm)

Kostik Belousov kostikbel at gmail.com
Sat Nov 22 05:46:10 PST 2008


On Fri, Nov 14, 2008 at 09:29:01AM +0200, Oleg Kozheltsev wrote:
> Hello,
> 
> yesterday I buy new motherboard INTEL DP43TF and now I can't write dvd 
> disks in any format (on PATA dvd-drive). but still can read any dvd and 
> cd. cd write and blank procedure for dvd-rw done well too. when I start 
> write dvd by growisofs (/dev/cd0 - atapicam), in log I get:
> 
> Nov 14 08:28:06 <kern.crit> gx kernel: acd0: FAILURE - RESERVE_TRACK 
> ILLEGAL REQUEST asc=0x30 ascq=0x05
> Nov 14 08:28:06 <kern.crit> gx kernel: interrupt storm detected on 
> "irq4:"; throttling interrupt source
> Nov 14 08:28:50 <kern.crit> gx last message repeated <many> times
> Nov 14 08:31:07 <kern.crit> gx kernel: acd0: FAILURE - WRITE_BIG timed out
> 
> if I use burncd (/dev/acd0. with, or without atapicam in kernel), then I 
> get only second string in log.
Does cdrecord works for you when writing CD-ROM or CD-RW ?
I got the same motherboard, and so far I had no problems with cd.
pooma% camcontrol devlist
<SONY DVD-ROM DDU1612 DYS3>        at scbus0 target 0 lun 0 (pass0,sg0,cd0)
<Optiarc DVD RW AD-7170A 1.02>     at scbus0 target 1 lun 0 (pass1,sg1,cd1)

I have no blank dvd at the hands now to verify growisofs operations.
> 
> before upgrade, I had 6.3-RELEASE-p3, update to 7.0-RELEASE-p5, and 
> after to 7.1-PRELEASE #5, it doesn't change anything. drive 
> configuration in BIOS - too (change only SATA controller ICH10/AHCI). 
> this IRQ is also used by USB and COM. turning off both in BIOS and/or 
> kernel change IRQ map, but drive still not work correctly. present or 
> not ACPI module - doesn't matter too. by the way, COM port I also can't 
> reach (/dev/cuad0), but without interrupt storm in log's (through APCI 
What do you mean by "cannot reach" ?

> or ISA. even if USB and atapicd is turned off).
> 
> someone had the same problem?... thanks for attention :)
> 
> 
> system info:
> 
> FreeBSD gx.dnepr.net 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #3: Thu Nov 
> 13 16:23:09 EET 2008     root at gx.dnepr.net:/usr/obj/usr/src/sys/KERN  i386
> 
> pcib3: <ACPI PCI-PCI bridge> irq 4 at device 28.3 on pci0
> pci3: <ACPI PCI bus> on pcib3
> 
> atapci0: <JMicron JMB368 UDMA133 controller> port 
> 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f 
> irq 4 at device 0.0 on pci3
> atapci0: [ITHREAD]
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> 
> usb4: <UHCI (generic) USB controller> on uhci3
> usb4: USB revision 1.0
> uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
> uhub4: 2 ports with 2 removable, self powered
> uhci4: <UHCI (generic) USB controller> port 0xf060-0xf07f irq 4 at 
> device 29.1 on pci0
> uhci4: [GIANT-LOCKED]
> uhci4: [ITHREAD]
> 
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
> acpi0
> sio0: type 16550A
> 
> acd0: DVDR <NEC DVD RW ND-3550A/1.05> at ata2-<master or slave> UDMA33
> cd0 at ata2 bus 0 target 1 lun 0
> cd0: <_NEC DVD_RW ND-3550A 1.05> Removable CD-ROM SCSI-0 device
> cd0: 33.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> 
> (if media present in boot time - interrupt storm again)
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 195 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20081122/62dc8029/attachment.pgp


More information about the freebsd-stable mailing list