can't write dvd (interrupt storm)

Oleg Kozheltsev axel at dnepr.net
Thu Nov 13 23:39:22 PST 2008


Hello,

yesterday I buy new motherboard INTEL DP43TF and now I can't write dvd 
disks in any format (on PATA dvd-drive). but still can read any dvd and 
cd. cd write and blank procedure for dvd-rw done well too. when I start 
write dvd by growisofs (/dev/cd0 - atapicam), in log I get:

Nov 14 08:28:06 <kern.crit> gx kernel: acd0: FAILURE - RESERVE_TRACK 
ILLEGAL REQUEST asc=0x30 ascq=0x05
Nov 14 08:28:06 <kern.crit> gx kernel: interrupt storm detected on 
"irq4:"; throttling interrupt source
Nov 14 08:28:50 <kern.crit> gx last message repeated <many> times
Nov 14 08:31:07 <kern.crit> gx kernel: acd0: FAILURE - WRITE_BIG timed out

if I use burncd (/dev/acd0. with, or without atapicam in kernel), then I 
get only second string in log.

before upgrade, I had 6.3-RELEASE-p3, update to 7.0-RELEASE-p5, and 
after to 7.1-PRELEASE #5, it doesn't change anything. drive 
configuration in BIOS - too (change only SATA controller ICH10/AHCI). 
this IRQ is also used by USB and COM. turning off both in BIOS and/or 
kernel change IRQ map, but drive still not work correctly. present or 
not ACPI module - doesn't matter too. by the way, COM port I also can't 
reach (/dev/cuad0), but without interrupt storm in log's (through APCI 
or ISA. even if USB and atapicd is turned off).

someone had the same problem?... thanks for attention :)


system info:

FreeBSD gx.dnepr.net 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #3: Thu Nov 
13 16:23:09 EET 2008     root at gx.dnepr.net:/usr/obj/usr/src/sys/KERN  i386

pcib3: <ACPI PCI-PCI bridge> irq 4 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3

atapci0: <JMicron JMB368 UDMA133 controller> port 
0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f 
irq 4 at device 0.0 on pci3
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]

usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xf060-0xf07f irq 4 at 
device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]

sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A

acd0: DVDR <NEC DVD RW ND-3550A/1.05> at ata2-<master or slave> UDMA33
cd0 at ata2 bus 0 target 1 lun 0
cd0: <_NEC DVD_RW ND-3550A 1.05> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present

(if media present in boot time - interrupt storm again)


More information about the freebsd-stable mailing list