Pentium 640 and Enhanced SpeedStep

[Andrei Kolu]

On Saturday 24 February 2007 7:51 pm, Andrei Kolu wrote:
> FreeBSD 6.1-RELEASE-p11
> Motherboard: Supermicro P8SCi
> CPU: Pentium 4 640
>
> I have HyperThreading enabled...
>
> Enabling "powerd" gave me this error message:
>
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: Please update driver or contact the maintainer.
> est: cpu_vendor GenuineIntel, msr 102d0000102d, bus_clk, 64
> device_attach: est1 attach returned 6

OK, I figured it out by myself. Added cpufreq_load="YES" 
into /boot/loader.conf but got error:

est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: Please update driver or contact the maintainer.
est: cpu_vendor GenuineIntel, msr 102d0000102d, bus_clk, 64
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1

BUT> # sysctl -a | grep dev.cpu

dev.cpu.0.%desc: ACPI CPU
dev.cpu.0.%driver: cpu
dev.cpu.0.%location: handle=\_PR_.CPU0
dev.cpu.0.%pnpinfo: _HID=none _UID=0
dev.cpu.0.%parent: acpi0
dev.cpu.0.freq: 2450
dev.cpu.0.freq_levels: 3200/88000 2800/75000 2450/65625 2400/63000 2100/55125 
1800/47250 1500/39375 1200/31500 900/23625
dev.cpu.1.%desc: ACPI CPU
dev.cpu.1.%driver: cpu
dev.cpu.1.%location: handle=\_PR_.CPU1
dev.cpu.1.%pnpinfo: _HID=none _UID=0
dev.cpu.1.%parent: acpi0
dev.cpufreq.0.%driver: cpufreq
dev.cpufreq.0.%parent: cpu0
dev.cpufreq.1.%driver: cpufreq
dev.cpufreq.1.%parent: cpu1

It works or not, I run "openssl speed" and my CPU is fully loaded but 
freq_levels shows me only 2450..