ath patch+hal for test

[JoaoBR]

On Tuesday 07 February 2006 15:11, Sam Leffler wrote:
> joaoBR wrote:
> > On Tuesday 07 February 2006 02:32, Sam Leffler wrote:
> >> If you have a laptop with a radio on/off switch I've tried to add the
> >> necessary glue to make it functional but since I don't have any laptops
> >> of this sort the code is untested.
> >
> > Hi
> > I check this out, do you want to know something specific or only if it
> > works or not? Any sysctl to set?
>
> I mostly want to hear about any regressions--i.e. new code fails where
> old code worked.  Please verify the regression by reverting the hal+ath

Hi, sorry for delay, i still cvsup yesterday evening to check again

the hostap is working fine as 11b and 11g, still had no time for 11a

the problem I see when setting -apbridge I get "ath0 device timeout" but it 
still works

ath0: <Atheros 5212> mem 0xe1800000-0xe180ffff irq 12 at device 10.0 on pci0
ath0: Ethernet address: 00:11:95:c2:2a:70
ath0: mac 5.9 phy 4.3 radio 3.6

I checked on releng_6
ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        ether 00:11:95:c2:2a:70
        media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g <hostap>
        status: associated
        ssid casa channel 7 bssid 00:11:95:c2:2a:70
        authmode OPEN privacy ON deftxkey 1 wepkey 1:40-bit wepkey 2:40-bit
        wepkey 3:40-bit wepkey 4:40-bit txpowmax 51 protmode CTS ssid HIDE
        -apbridge dtimperiod 1 bintval 100


João







A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura.
Service fornecido pelo Datacenter Matik  https://datacenter.matik.com.br