FreeBSD NVIDIA Drivers does not work with a GeForce4 MX 440

[Aurelien Nephtali]

Yeah, that's what I did yesterday when roaming into the BIOS, and it
works for me too :)

On Thu, Apr 24, 2003 at 08:37:17AM +0930, Phil Kernick wrote:
> I had the same problem.  This thing that resolved it was turning on the 
> "Enable an IRQ for VGA" BIOS setting.
> 
> 
> Phil.
> 
> Aurelien Nephtali wrote:
> > Hi,
> > 
> > I have a GeForce4 MX 440 and a fresh 4.8-STABLE system. I have installed
> > the
> > NVIDIA drivers from the ports, everything went well but when the
> > 'nvidia.ko'
> > kernel module is loaded I got this message:
> > 
> > nvidia0: <GeForce4 MX 440> mem
> > 0xdda80000-0xddafffff,0xd0000000-0xd7ffffff,0xde0
> > 00000-0xdeffffff irq 0 at device 0.0 on pci1
> > pci_cfgintr: can't route an interrupt to 1:0 INTA
> > nvidia0: Interrupt handler setup failed.
> > device_probe_and_attach: nvidia0 attach returned 22
> > 
> > I have tested my card under 4.7-STABLE, 4.8-STABLE and CURRENT and it is
> > always
> > the same message, what is wrong ? :/
> > 
> > Thanks.
> > 
> > _______________________________________________
> > freebsd-stable at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
> 
> 
> -- 
>     _-_|\   Phil Kernick                      E-Mail: Phil at Kernick.org
>    /     \  ROTFL Enterprises                 Mobile:  041 61 ROTFL
>    \_.-*_/
>         v   Humourist, satirist, and probably a few more 'ists to boot!