Slow speed detection for mpt0 (LSI 1030) for 5.4

[Scott Long]

Alexander Ilin wrote:
> On Thu, Sep 01, 2005 at 07:37:40AM -0600, Scott Long wrote:
> 
>>Alexander Ilin wrote:
>>
>>>Hello,
>>>
>>>I have so strange problem with SCSI disks at my new Intel Server SR2400JR2.
>>>I have 4 same disks from one vendor. When I am starting FreeBSD 5.4 (I've
>>>update to last stable version and have no changes with my problem), the 
>>>last disk working at lowest possible speed. After manual command 
>>>'camcontrol reset 0' it began to work normally. If I remove one of the 
>>>disks
>>>before first start - all working fine. Here is my dmesg.boot:
>>>
>>
>>This problem was fixed by a massive overhaul of the driver recently. 
>>The changes are in 6-STABLE and 7-CURRENT, but you should be able to
>>apply them to 5-STABLE by just copying the /sys/dev/mpt directory from
>>a HEAD/7-CURRENT tree to your 5-STABLE tree, and recompiling.
>>
>>Scott
> 
>  
>  Hi Scott, great thanks for idea to fixing that. As far as I see the tree
> /sys/dev/mpt have much more differences not only in drivers, but also in file
> names. So, I need not only apply the new tree, but also change my config files.
> I'll try to do that, but it's not so regular solution. Are there any plans to
> fix this in RELENG_5 ?
> 
>  Regards,
> 

Merging it into RELENG_5 is on my TODO list before 5.5 gets released.

Scott