RELENG_8 on AMX FX 8150?

Thu Nov 10 07:03:07 UTC 2011

Does anyone know if this works? I have had one kernel trap and a make 
buildworld fails with this:

cc -O2 -pipe -I. -I/usr/src/lib/libdwarf 
-I/usr/obj/usr/src/tmp/legacy/usr/include -c 
/usr/src/lib/libdwarf/dwarf_errmsg.c
cc: Internal error: Illegal instruction: 4 (program cc1)
Please submit a full bug report.
See <URL:http://gcc.gnu.org/bugs.html> for instructions.

I also have an error when trying to build gettext-0.18.1.1.tar.gz. It 
could be I have something corrupt, a bad disk, or whatever but it isn't 
obvious and I'm wondering whether anyone is working with that CPU.

bd1# dmesg
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-STABLE #0: Fri Oct 28 22:47:38 PDT 2011
     root@:/usr/src/sys/amd64/compile/WORKHORSE amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD FX(tm)-8150 Eight-Core Processor            (3616.17-MHz K8-class 
CPU)
   Origin = "AuthenticAMD"  Id = 0x600f12  Family = 15  Model = 1  Stepping 
= 2

Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>

Features2=0x1698220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,AVX>
   AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
   AMD 
Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
   TSC: P-state invariant
real memory  = 12884901888 (12288 MB)
avail memory = 12385927168 (11812 MB)
ACPI APIC Table: <GBT    GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
  cpu2 (AP): APIC ID:  2
  cpu3 (AP): APIC ID:  3
  cpu4 (AP): APIC ID:  4
  cpu5 (AP): APIC ID:  5
  cpu6 (AP): APIC ID:  6
  cpu7 (AP): APIC ID:  7
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfca0000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 19 at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
mps0: <LSI SAS2008> port 0xee00-0xeeff mem 
0xfddfc000-0xfddfffff,0xfdd80000-0xfddbffff irq 19 at device 0.0 on pci1
mps0: Firmware: 07.00.00.00
mps0: IOCCapabilities: 
185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
mps0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xdf00-0xdf1f mem 
0xfdbc0000-0xfdbdffff,0xfdb00000-0xfdb7ffff,0xfdbfc000-0xfdbfffff irq 16 
at device 0.0 on pci2
em0: Using MSIX interrupts with 3 vectors
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
em0: Ethernet address: 00:1b:21:c5:f0:6c
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <serial bus, USB> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mps1: <LSI SAS2008> port 0xbe00-0xbeff mem 
0xfd1fc000-0xfd1fffff,0xfd180000-0xfd1bffff irq 16 at device 0.0 on pci4
mps1: Firmware: 10.00.02.00
mps1: IOCCapabilities: 
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
mps1: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xae00-0xaeff mem 
0xd0000000-0xdfffffff,0xfdec0000-0xfdedffff irq 17 at device 0.0 on pci5
pci5: <multimedia, HDA> at device 0.1 (no driver attached)
atapci0: <ATI IXP700/800 SATA300 controller> port 
0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 
0xfdfff000-0xfdfff3ff irq 19 at device 17.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 6 6Gbps ports, PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfdffe000-0xfdffefff irq 18 at 
device 18.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdffd000-0xfdffd0ff irq 
17 at device 18.2 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xfdffc000-0xfdffcfff irq 18 at 
device 19.0 on pci0
ohci1: [ITHREAD]
usbus2: <OHCI (generic) USB controller> on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffb000-0xfdffb0ff irq 
17 at device 19.2 on pci0
ehci1: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib6
ohci2: <OHCI (generic) USB controller> mem 0xfdffa000-0xfdffafff irq 18 at 
device 20.5 on pci0
ohci2: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci2
pcib7: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci7: <ACPI PCI bus> on pcib7
re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 
0x8e00-0x8eff mem 0xfd4ff000-0xfd4fffff,0xfd4f8000-0xfd4fbfff irq 17 at 
device 0.0 on pci7
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 
1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 50:e5:49:45:54:46
re0: [ITHREAD]
pcib8: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <serial bus, USB> at device 0.0 (no driver attached)
ohci3: <OHCI (generic) USB controller> mem 0xfdff9000-0xfdff9fff irq 18 at 
device 22.0 on pci0
ohci3: [ITHREAD]
usbus5: <OHCI (generic) USB controller> on ohci3
ehci2: <EHCI (generic) USB 2.0 controller> mem 0xfdff8000-0xfdff80ff irq 
17 at device 22.2 on pci0
ehci2: [ITHREAD]
usbus6: EHCI version 1.0
usbus6: <EHCI (generic) USB 2.0 controller> on ehci2
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 
0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xcffff,0xd0000-0xd4fff,0xdb000-0xdbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub4: 2 ports with 2 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
ugen0.2: <BTC> at usbus0
ukbd0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on 
usbus0
kbd2 at ukbd0
uhid0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on 
usbus0
da0 at mps1 bus 0 scbus1 target 0 lun 0
da0: <ATA ST380815AS B> Fixed Direct Access SCSI-6 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
da1 at mps1 bus 0 scbus1 target 1 lun 0
da1: <ATA ST31000333AS SD35> Fixed Direct Access SCSI-6 device
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
/: mount pending error: blocks 6312 files 674
ZFS filesystem version 5
ZFS storage pool version 28
pid 7360 (cc1), uid 0: exited on signal 4 (core dumped)